diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
12 files changed, 356 insertions, 368 deletions
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt index f404a4f9b165..d00debe2e86f 100644 --- a/Documentation/devicetree/bindings/arm/al,alpine.txt +++ b/Documentation/devicetree/bindings/arm/al,alpine.txt @@ -14,75 +14,3 @@ compatible: must contain "al,alpine" ... } - -* CPU node: - -The Alpine platform includes cortex-a15 cores. -enable-method: must be "al,alpine-smp" to allow smp [1] - -Example: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "al,alpine-smp"; - - cpu@0 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <1>; - }; - - cpu@2 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <2>; - }; - - cpu@3 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <3>; - }; -}; - - -* Alpine CPU resume registers - -The CPU resume register are used to define required resume address after -reset. - -Properties: -- compatible : Should contain "al,alpine-cpu-resume". -- reg : Offset and length of the register set for the device - -Example: - -cpu_resume { - compatible = "al,alpine-cpu-resume"; - reg = <0xfbff5ed0 0x30>; -}; - -* Alpine System-Fabric Service Registers - -The System-Fabric Service Registers allow various operation on CPU and -system fabric, like powering CPUs off. - -Properties: -- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". -- reg : Offset and length of the register set for the device - -Example: - -nb_service { - compatible = "al,alpine-sysfabric-service", "syscon"; - reg = <0xfb070000 0x10000>; -}; - -[1] arm/cpu-enable-method/al,alpine-smp diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 31220b54d85d..4bf1b4da7659 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -70,173 +70,3 @@ compatible: must be one of: - "atmel,samv71q19" - "atmel,samv71q20" - "atmel,samv71q21" - -Chipid required properties: -- compatible: Should be "atmel,sama5d2-chipid" -- reg : Should contain registers location and length - -PIT Timer required properties: -- compatible: Should be "atmel,at91sam9260-pit" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt for the PIT which is the IRQ line - shared across all System Controller members. - -System Timer (ST) required properties: -- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt for the ST which is the IRQ line - shared across all System Controller members. -- clocks: phandle to input clock. -Its subnodes can be: -- watchdog: compatible should be "atmel,at91rm9200-wdt" - -RSTC Reset Controller required properties: -- compatible: Should be "atmel,<chip>-rstc". - <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" -- reg: Should contain registers location and length -- clocks: phandle to input clock. - -Example: - - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; - clocks = <&clk32k>; - }; - -RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" - "atmel,at91sam9260-sdramc", - "atmel,at91sam9g45-ddramc", - "atmel,sama5d3-ddramc", -- reg: Should contain registers location and length - -Examples: - - ramc0: ramc@ffffe800 { - compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe800 0x200>; - }; - -SHDWC Shutdown Controller - -required properties: -- compatible: Should be "atmel,<chip>-shdwc". - <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". -- reg: Should contain registers location and length -- clocks: phandle to input clock. - -optional properties: -- atmel,wakeup-mode: String, operation mode of the wakeup mode. - Supported values are: "none", "high", "low", "any". -- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). - -optional at91sam9260 properties: -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9rl properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9x5 properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. - -Example: - - shdwc@fffffd10 { - compatible = "atmel,at91sam9260-shdwc"; - reg = <0xfffffd10 0x10>; - clocks = <&clk32k>; - }; - -SHDWC SAMA5D2-Compatible Shutdown Controller - -1) shdwc node - -required properties: -- compatible: should be "atmel,sama5d2-shdwc". -- reg: should contain registers location and length -- clocks: phandle to input clock. -- #address-cells: should be one. The cell is the wake-up input index. -- #size-cells: should be zero. - -optional properties: - -- debounce-delay-us: minimum wake-up inputs debouncer period in - microseconds. It's usually a board-related property. -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. - -The node contains child nodes for each wake-up input that the platform uses. - -2) input nodes - -Wake-up input nodes are usually described in the "board" part of the Device -Tree. Note also that input 0 is linked to the wake-up pin and is frequently -used. - -Required properties: -- reg: should contain the wake-up input index [0 - 15]. - -Optional properties: -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described - by the child, forces the wake-up of the core power supply on a high level. - The default is to be active low. - -Example: - -On the SoC side: - shdwc@f8048010 { - compatible = "atmel,sama5d2-shdwc"; - reg = <0xf8048010 0x10>; - clocks = <&clk32k>; - #address-cells = <1>; - #size-cells = <0>; - atmel,wakeup-rtc-timer; - }; - -On the board side: - shdwc@f8048010 { - debounce-delay-us = <976>; - - input@0 { - reg = <0>; - }; - - input@1 { - reg = <1>; - atmel,wakeup-active-high; - }; - }; - -Special Function Registers (SFR) - -Special Function Registers (SFR) manage specific aspects of the integrated -memory, bridge implementations, processor and other functionality not controlled -elsewhere. - -required properties: -- compatible: Should be "atmel,<chip>-sfr", "syscon" or - "atmel,<chip>-sfrbu", "syscon" - <chip> can be "sama5d3", "sama5d4" or "sama5d2". -- reg: Should contain registers location and length - - sfr@f0038000 { - compatible = "atmel,sama5d3-sfr", "syscon"; - reg = <0xf0038000 0x60>; - }; - -Security Module (SECUMOD) - -The Security Module macrocell provides all necessary secure functions to avoid -voltage, temperature, frequency and mechanical attacks on the chip. It also -embeds secure memories that can be scrambled - -required properties: -- compatible: Should be "atmel,<chip>-secumod", "syscon". - <chip> can be "sama5d2". -- reg: Should contain registers location and length - - secumod@fc040000 { - compatible = "atmel,sama5d2-secumod", "syscon"; - reg = <0xfc040000 0x100>; - }; diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt new file mode 100644 index 000000000000..4b96608ad692 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -0,0 +1,171 @@ +Atmel system registers + +Chipid required properties: +- compatible: Should be "atmel,sama5d2-chipid" +- reg : Should contain registers location and length + +PIT Timer required properties: +- compatible: Should be "atmel,at91sam9260-pit" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for the PIT which is the IRQ line + shared across all System Controller members. + +System Timer (ST) required properties: +- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for the ST which is the IRQ line + shared across all System Controller members. +- clocks: phandle to input clock. +Its subnodes can be: +- watchdog: compatible should be "atmel,at91rm9200-wdt" + +RSTC Reset Controller required properties: +- compatible: Should be "atmel,<chip>-rstc". + <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" +- reg: Should contain registers location and length +- clocks: phandle to input clock. + +Example: + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; + }; + +RAMC SDRAM/DDR Controller required properties: +- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" + "atmel,at91sam9260-sdramc", + "atmel,at91sam9g45-ddramc", + "atmel,sama5d3-ddramc", +- reg: Should contain registers location and length + +Examples: + + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + }; + +SHDWC Shutdown Controller + +required properties: +- compatible: Should be "atmel,<chip>-shdwc". + <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". +- reg: Should contain registers location and length +- clocks: phandle to input clock. + +optional properties: +- atmel,wakeup-mode: String, operation mode of the wakeup mode. + Supported values are: "none", "high", "low", "any". +- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). + +optional at91sam9260 properties: +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. + +optional at91sam9rl properties: +- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. + +optional at91sam9x5 properties: +- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. + +Example: + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + +SHDWC SAMA5D2-Compatible Shutdown Controller + +1) shdwc node + +required properties: +- compatible: should be "atmel,sama5d2-shdwc". +- reg: should contain registers location and length +- clocks: phandle to input clock. +- #address-cells: should be one. The cell is the wake-up input index. +- #size-cells: should be zero. + +optional properties: + +- debounce-delay-us: minimum wake-up inputs debouncer period in + microseconds. It's usually a board-related property. +- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. + +The node contains child nodes for each wake-up input that the platform uses. + +2) input nodes + +Wake-up input nodes are usually described in the "board" part of the Device +Tree. Note also that input 0 is linked to the wake-up pin and is frequently +used. + +Required properties: +- reg: should contain the wake-up input index [0 - 15]. + +Optional properties: +- atmel,wakeup-active-high: boolean, the corresponding wake-up input described + by the child, forces the wake-up of the core power supply on a high level. + The default is to be active low. + +Example: + +On the SoC side: + shdwc@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + }; + +On the board side: + shdwc@f8048010 { + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + +Special Function Registers (SFR) + +Special Function Registers (SFR) manage specific aspects of the integrated +memory, bridge implementations, processor and other functionality not controlled +elsewhere. + +required properties: +- compatible: Should be "atmel,<chip>-sfr", "syscon" or + "atmel,<chip>-sfrbu", "syscon" + <chip> can be "sama5d3", "sama5d4" or "sama5d2". +- reg: Should contain registers location and length + + sfr@f0038000 { + compatible = "atmel,sama5d3-sfr", "syscon"; + reg = <0xf0038000 0x60>; + }; + +Security Module (SECUMOD) + +The Security Module macrocell provides all necessary secure functions to avoid +voltage, temperature, frequency and mechanical attacks on the chip. It also +embeds secure memories that can be scrambled + +required properties: +- compatible: Should be "atmel,<chip>-secumod", "syscon". + <chip> can be "sama5d2". +- reg: Should contain registers location and length + + secumod@fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon"; + reg = <0xfc040000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 5d1ad09bafb4..f8aff65ab921 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -54,9 +54,7 @@ its hardware characteristcs. clocks the core of that coresight component. The latter clock is optional. - * port or ports: The representation of the component's port - layout using the generic DT graph presentation found in - "bindings/graph.txt". + * port or ports: see "Graph bindings for Coresight" below. * Additional required properties for System Trace Macrocells (STM): * reg: along with the physical base address and length of the register @@ -73,7 +71,7 @@ its hardware characteristcs. AMBA markee): - "arm,coresight-replicator" - * port or ports: same as above. + * port or ports: see "Graph bindings for Coresight" below. * Optional properties for ETM/PTMs: @@ -96,6 +94,20 @@ its hardware characteristcs. * interrupts : Exactly one SPI may be listed for reporting the address error +Graph bindings for Coresight +------------------------------- + +Coresight components are interconnected to create a data path for the flow of +trace data generated from the "sources" to their collection points "sink". +Each coresight component must describe the "input" and "output" connections. +The connections must be described via generic DT graph bindings as described +by the "bindings/graph.txt", where each "port" along with an "endpoint" +component represents a hardware port and the connection. + + * All output ports must be listed inside a child node named "out-ports" + * All input ports must be listed inside a child node named "in-ports". + * Port address must match the hardware port number. + Example: 1. Sinks @@ -105,10 +117,11 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etb_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + etb_in_port: endpoint@0 { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -119,10 +132,11 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + tpiu_in_port: endpoint@0 { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -133,22 +147,16 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etr_in_port: endpoint { - slave-mode; remote-endpoint = <&replicator2_out_port0>; }; }; + }; - /* CATU link represented by output port */ - port@1 { - reg = <1>; + out-ports { + port { etr_out_port: endpoint { remote-endpoint = <&catu_in_port>; }; @@ -163,7 +171,7 @@ Example: */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -181,12 +189,11 @@ Example: remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel_out_port0>; }; }; @@ -199,40 +206,36 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port0: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; @@ -248,9 +251,11 @@ Example: cpu = <&cpu0>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -262,9 +267,11 @@ Example: cpu = <&cpu1>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -278,9 +285,11 @@ Example: clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; - port { - stm_out_port: endpoint { - remote-endpoint = <&main_funnel_in_port2>; + out-ports { + port { + stm_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port2>; + }; }; }; }; @@ -295,10 +304,11 @@ Example: clock-names = "apb_pclk"; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - port { - catu_in_port: endpoint { - slave-mode; - remote-endpoint = <&etr_out_port>; + in-ports { + port { + catu_in_port: endpoint { + remote-endpoint = <&etr_out_port>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp index c2e0cc5e4cfd..35e5afb6d9ad 100644 --- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp @@ -14,7 +14,28 @@ Related properties: (none) Note: This enable method requires valid nodes compatible with -"al,alpine-cpu-resume" and "al,alpine-nb-service"[1]. +"al,alpine-cpu-resume" and "al,alpine-nb-service". + + +* Alpine CPU resume registers + +The CPU resume register are used to define required resume address after +reset. + +Properties: +- compatible : Should contain "al,alpine-cpu-resume". +- reg : Offset and length of the register set for the device + + +* Alpine System-Fabric Service Registers + +The System-Fabric Service Registers allow various operation on CPU and +system fabric, like powering CPUs off. + +Properties: +- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". +- reg : Offset and length of the register set for the device + Example: @@ -48,5 +69,12 @@ cpus { }; }; --- -[1] arm/al,alpine.txt +cpu_resume { + compatible = "al,alpine-cpu-resume"; + reg = <0xfbff5ed0 0x30>; +}; + +nb_service { + compatible = "al,alpine-sysfabric-service", "syscon"; + reg = <0xfb070000 0x10000>; +}; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 96dfccc0faa8..b0198a1cf403 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -276,7 +276,7 @@ described below. Usage: optional Value type: <prop-encoded-array> Definition: A u32 value that represents the running time dynamic - power coefficient in units of mW/MHz/uV^2. The + power coefficient in units of uW/MHz/V^2. The coefficient can either be calculated from power measurements or derived by analysis. @@ -287,7 +287,7 @@ described below. Pdyn = dynamic-power-coefficient * V^2 * f - where voltage is in uV, frequency is in MHz. + where voltage is in V, frequency is in MHz. Example 1 (dual-cluster big.LITTLE system 32-bit): diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt new file mode 100644 index 000000000000..b5cb374dc47d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt @@ -0,0 +1,19 @@ +Freescale DCFG + +DCFG is the device configuration unit, that provides general purpose +configuration and status for the device. Such as setting the secondary +core start address and release the secondary core from holdoff and startup. + +Required properties: + - compatible: Should contain a chip-specific compatible string, + Chip-specific strings are of the form "fsl,<chip>-dcfg", + The following <chip>s are known to be supported: + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. + + - reg : should contain base address and length of DCFG memory-mapped registers + +Example: + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt new file mode 100644 index 000000000000..0ab67b0b216d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt @@ -0,0 +1,19 @@ +Freescale SCFG + +SCFG is the supplemental configuration unit, that provides SoC specific +configuration and status registers for the chip. Such as getting PEX port +status. + +Required properties: + - compatible: Should contain a chip-specific compatible string, + Chip-specific strings are of the form "fsl,<chip>-scfg", + The following <chip>s are known to be supported: + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. + + - reg: should contain base address and length of SCFG memory-mapped registers + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 7b964d8772e6..5074aeecd327 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -145,45 +145,6 @@ Freescale LS1021A Platform Device Tree Bindings Required root node compatible properties: - compatible = "fsl,ls1021a"; -Freescale SoC-specific Device Tree Bindings -------------------------------------------- - -Freescale SCFG - SCFG is the supplemental configuration unit, that provides SoC specific -configuration and status registers for the chip. Such as getting PEX port -status. - Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-scfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg: should contain base address and length of SCFG memory-mapped registers - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg"; - reg = <0x0 0x1570000 0x0 0x10000>; - }; - -Freescale DCFG - DCFG is the device configuration unit, that provides general purpose -configuration and status for the device. Such as setting the secondary -core start address and release the secondary core from holdoff and startup. - Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-dcfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg : should contain base address and length of DCFG memory-mapped registers - -Example: - dcfg: dcfg@1ee0000 { - compatible = "fsl,ls1021a-dcfg"; - reg = <0x0 0x1ee0000 0x0 0x10000>; - }; - Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ---------------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt index e31303fb233a..f27bbff2c780 100644 --- a/Documentation/devicetree/bindings/arm/secure.txt +++ b/Documentation/devicetree/bindings/arm/secure.txt @@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These secure- bindings only need to be used where both the Secure and Normal world views need to be described in a single device tree. -Valid Secure world properties: +Valid Secure world properties +----------------------------- - secure-status : specifies whether the device is present and usable in the secure world. The combination of this with "status" allows @@ -51,3 +52,19 @@ Valid Secure world properties: status = "disabled"; secure-status = "okay"; /* S-only */ status = "disabled"; /* disabled in both */ status = "disabled"; secure-status = "disabled"; /* disabled in both */ + +The secure-chosen node +---------------------- + +Similar to the /chosen node which serves as a place for passing data +between firmware and the operating system, the /secure-chosen node may +be used to pass data to the Secure OS. Only the properties defined +below may appear in the /secure-chosen node. + +- stdout-path : specifies the device to be used by the Secure OS for + its console output. The syntax is the same as for /chosen/stdout-path. + If the /secure-chosen node exists but the stdout-path property is not + present, the Secure OS should not perform any console output. If + /secure-chosen does not exist, the Secure OS should use the value of + /chosen/stdout-path instead (that is, use the same device as the + Normal world OS). diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt new file mode 100644 index 000000000000..7e66b7f7ba96 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt @@ -0,0 +1,30 @@ +ZTE sysctrl Registers + +Registers for 'zte,zx296702' SoC: + +System management required properties: + - compatible = "zte,sysctrl" + +Low power management required properties: + - compatible = "zte,zx296702-pcu" + +Bus matrix required properties: + - compatible = "zte,zx-bus-matrix" + + +Registers for 'zte,zx296718' SoC: + +System management required properties: + - compatible = "zte,zx296718-aon-sysctrl" + - compatible = "zte,zx296718-sysctrl" + +Example: +aon_sysctrl: aon-sysctrl@116000 { + compatible = "zte,zx296718-aon-sysctrl", "syscon"; + reg = <0x116000 0x1000>; +}; + +sysctrl: sysctrl@1463000 { + compatible = "zte,zx296718-sysctrl", "syscon"; + reg = <0x1463000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt index 83369785d29c..340612794a37 100644 --- a/Documentation/devicetree/bindings/arm/zte.txt +++ b/Documentation/devicetree/bindings/arm/zte.txt @@ -1,20 +1,10 @@ ZTE platforms device tree bindings ---------------------------------------- +--------------------------------------- - ZX296702 board: Required root node properties: - compatible = "zte,zx296702-ad1", "zte,zx296702" -System management required properties: - - compatible = "zte,sysctrl" - -Low power management required properties: - - compatible = "zte,zx296702-pcu" - -Bus matrix required properties: - - compatible = "zte,zx-bus-matrix" - - --------------------------------------- - ZX296718 SoC: Required root node properties: @@ -22,18 +12,3 @@ Bus matrix required properties: ZX296718 EVB board: - "zte,zx296718-evb" - -System management required properties: - - compatible = "zte,zx296718-aon-sysctrl" - - compatible = "zte,zx296718-sysctrl" - -Example: -aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; -}; - -sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; -}; |