diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
63 files changed, 1437 insertions, 1369 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt deleted file mode 100644 index d54f33c4e0da..000000000000 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ /dev/null @@ -1,56 +0,0 @@ -Actions Semi platforms device tree bindings -------------------------------------------- - - -S500 SoC -======== - -Required root node properties: - - - compatible : must contain "actions,s500" - - -Modules: - -Root node property compatible must contain, depending on module: - - - LeMaker Guitar: "lemaker,guitar" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Allo.com Sparky: "allo,sparky" - - Cubietech CubieBoard6: "cubietech,cubieboard6" - - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" - - -S700 SoC -======== - -Required root node properties: - -- compatible : must contain "actions,s700" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Cubietech CubieBoard7: "cubietech,cubieboard7" - - -S900 SoC -======== - -Required root node properties: - -- compatible : must contain "actions,s900" - - -Boards: - -Root node property compatible must contain, depending on board: - - - uCRobotics Bubblegum-96: "ucrobotics,bubblegum-96" diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml new file mode 100644 index 000000000000..ace3fdaa8396 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/actions.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/actions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi platforms device tree bindings + +maintainers: + - Andreas Färber <afaerber@suse.de> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + oneOf: + # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC. + - items: + - enum: + - allo,sparky # Allo.com Sparky + - cubietech,cubieboard6 # Cubietech CubieBoard6 + - const: actions,s500 + - items: + - enum: + - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B + - const: lemaker,guitar + - const: actions,s500 + + # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC. + - items: + - enum: + - cubietech,cubieboard7 # Cubietech CubieBoard7 + - const: actions,s700 + + # The Actions Semi S900 is a quad-core ARM Cortex-A53 SoC. + - items: + - enum: + - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96 + - const: actions,s900 diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt deleted file mode 100644 index d00debe2e86f..000000000000 --- a/Documentation/devicetree/bindings/arm/al,alpine.txt +++ /dev/null @@ -1,16 +0,0 @@ -Annapurna Labs Alpine Platform Device Tree Bindings ---------------------------------------------------------------- - -Boards in the Alpine family shall have the following properties: - -* Required root node properties: -compatible: must contain "al,alpine" - -* Example: - -/ { - model = "Annapurna Labs Alpine Dev Board"; - compatible = "al,alpine"; - - ... -} diff --git a/Documentation/devicetree/bindings/arm/al,alpine.yaml b/Documentation/devicetree/bindings/arm/al,alpine.yaml new file mode 100644 index 000000000000..a70dff277e05 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/al,alpine.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/al,alpine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Annapurna Labs Alpine Platform Device Tree Bindings + +maintainers: + - Tsahee Zidenberg <tsahee@annapurnalabs.com> + - Antoine Tenart <antoine.tenart@bootlin.com> + +properties: + compatible: + items: + - const: al,alpine + model: + items: + - const: "Annapurna Labs Alpine Dev Board" + +... diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt deleted file mode 100644 index 061f7b98a07f..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ /dev/null @@ -1,142 +0,0 @@ -Amlogic MesonX device tree bindings -------------------------------------------- - -Work in progress statement: - -Device tree files and bindings applying to Amlogic SoCs and boards are -considered "unstable". Any Amlogic device tree binding may change at -any time. Be sure to use a device tree binary and a kernel image -generated from the same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - -Boards with the Amlogic Meson6 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson6" - -Boards with the Amlogic Meson8 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8"; - -Boards with the Amlogic Meson8b SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8b"; - -Boards with the Amlogic Meson8m2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8m2"; - -Boards with the Amlogic Meson GXBaby SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson-gxbb"; - -Boards with the Amlogic Meson GXL S905X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905d", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s805x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905W SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905w", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s912", "amlogic,meson-gxm"; - -Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,a113d", "amlogic,meson-axg"; - -Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,g12a"; - -Board compatible values (alphabetically, grouped by SoC): - - - "geniatech,atv1200" (Meson6) - - - "minix,neo-x8" (Meson8) - - - "endless,ec100" (Meson8b) - - "hardkernel,odroid-c1" (Meson8b) - - "tronfy,mxq" (Meson8b) - - - "tronsmart,mxiii-plus" (Meson8m2) - - - "amlogic,p200" (Meson gxbb) - - "amlogic,p201" (Meson gxbb) - - "friendlyarm,nanopi-k2" (Meson gxbb) - - "hardkernel,odroid-c2" (Meson gxbb) - - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) - - "wetek,hub" (Meson gxbb) - - "wetek,play2" (Meson gxbb) - - - "amlogic,p212" (Meson gxl s905x) - - "hwacom,amazetv" (Meson gxl s905x) - - "khadas,vim" (Meson gxl s905x) - - "libretech,cc" (Meson gxl s905x) - - - "amlogic,p230" (Meson gxl s905d) - - "amlogic,p231" (Meson gxl s905d) - - "phicomm,n1" (Meson gxl s905d) - - - "amlogic,p241" (Meson gxl s805x) - - "libretech,aml-s805x-ac" (Meson gxl s805x) - - - "amlogic,p281" (Meson gxl s905w) - - "oranth,tx3-mini" (Meson gxl s905w) - - - "amlogic,q200" (Meson gxm s912) - - "amlogic,q201" (Meson gxm s912) - - "khadas,vim2" (Meson gxm s912) - - "kingnovel,r-box-pro" (Meson gxm S912) - - "nexbox,a1" (Meson gxm s912) - - "tronsmart,vega-s96" (Meson gxm s912) - - - "amlogic,s400" (Meson axg a113d) - - - "amlogic,u200" (Meson g12a s905d2) - - "amediatech,x96-max" (Meson g12a s905x2) - - "seirobotics,sei510" (Meson g12a s905x2) - -Amlogic Meson Firmware registers Interface ------------------------------------------- - -The Meson SoCs have a register bank with status and data shared with the -secure firmware. - -Required properties: - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" - -Properties should indentify components of this register interface : - -Meson GX SoC Information ------------------------- -A firmware register encodes the SoC type, package and revision information on -the Meson GX SoCs. -If present, the following property should be added : - -Optional properties: - - amlogic,has-chip-id: If present, the interface gives the current SoC version. - -Example -------- - -ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; -}; diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml new file mode 100644 index 000000000000..99015cef8bb1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/amlogic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic MesonX device tree bindings + +maintainers: + - Kevin Hilman <khilman@baylibre.com> + +description: |+ + Work in progress statement: + + Device tree files and bindings applying to Amlogic SoCs and boards are + considered "unstable". Any Amlogic device tree binding may change at + any time. Be sure to use a device tree binary and a kernel image + generated from the same source tree. + + Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a + stable binding/ABI. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Boards with the Amlogic Meson6 SoC + items: + - enum: + - geniatech,atv1200 + - const: amlogic,meson6 + + - description: Boards with the Amlogic Meson8 SoC + items: + - enum: + - minix,neo-x8 + - const: amlogic,meson8 + + - description: Boards with the Amlogic Meson8m2 SoC + items: + - enum: + - tronsmart,mxiii-plus + - const: amlogic,meson8m2 + + - description: Boards with the Amlogic Meson8b SoC + items: + - enum: + - endless,ec100 + - hardkernel,odroid-c1 + - tronfy,mxq + - const: amlogic,meson8b + + - description: Boards with the Amlogic Meson GXBaby SoC + items: + - enum: + - amlogic,p200 + - amlogic,p201 + - friendlyarm,nanopi-k2 + - hardkernel,odroid-c2 + - nexbox,a95x + - wetek,hub + - wetek,play2 + - const: amlogic,meson-gxbb + + - description: Tronsmart Vega S95 devices + items: + - enum: + - tronsmart,vega-s95-pro + - tronsmart,vega-s95-meta + - tronsmart,vega-s95-telos + - const: tronsmart,vega-s95 + - const: amlogic,meson-gxbb + + - description: Boards with the Amlogic Meson GXL S805X SoC + items: + - enum: + - amlogic,p241 + - libretech,aml-s805x-ac + - const: amlogic,s805x + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905W SoC + items: + - enum: + - amlogic,p281 + - oranth,tx3-mini + - const: amlogic,s905w + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905X SoC + items: + - enum: + - amlogic,p212 + - hwacom,amazetv + - khadas,vim + - libretech,cc + - nexbox,a95x + - const: amlogic,s905x + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905D SoC + items: + - enum: + - amlogic,p230 + - amlogic,p231 + - phicomm,n1 + - const: amlogic,s905d + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXM S912 SoC + items: + - enum: + - amlogic,q200 + - amlogic,q201 + - khadas,vim2 + - kingnovel,r-box-pro + - nexbox,a1 + - tronsmart,vega-s96 + - const: amlogic,s912 + - const: amlogic,meson-gxm + + - description: Boards with the Amlogic Meson AXG A113D SoC + items: + - enum: + - amlogic,s400 + - const: amlogic,a113d + - const: amlogic,meson-axg + + - description: Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC + items: + - enum: + - amediatech,x96-max + - amlogic,u200 + - seirobotics,sei510 + - const: amlogic,g12a + + - description: Boards with the Amlogic Meson G12B A311D SoC + items: + - enum: + - khadas,vim3 + - const: amlogic,a311d + - const: amlogic,g12b + + - description: Boards with the Amlogic Meson G12B S922X SoC + items: + - enum: + - hardkernel,odroid-n2 + - khadas,vim3 + - const: amlogic,s922x + - const: amlogic,g12b + + - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC + items: + - enum: + - seirobotics,sei610 + - khadas,vim3l + - const: amlogic,sm1 +... diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml new file mode 100644 index 000000000000..853d7d2b56f5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Firmware registers Interface + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The Meson SoCs have a register bank with status and data shared with the + secure firmware. + +# We need a select here so we don't match all nodes with 'syscon' +select: + properties: + compatible: + contains: + const: amlogic,meson-gx-ao-secure + required: + - compatible + +properties: + compatible: + items: + - const: amlogic,meson-gx-ao-secure + - const: syscon + + reg: + maxItems: 1 + + amlogic,has-chip-id: + description: | + A firmware register encodes the SoC type, package and revision + information on the Meson GX SoCs. If present, the interface gives + the current SoC version. + type: boolean + +required: + - compatible + - reg + +examples: + - | + ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x140 0x140>; + amlogic,has-chip-id; + }; diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index 5f3719ab7075..083dbf96ee00 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -6,7 +6,7 @@ that are provided by the hardware platform it is running on, including power and performance functions. This binding is intended to define the interface the firmware implementing -the SCMI as described in ARM document number ARM DUI 0922B ("ARM System Control +the SCMI as described in ARM document number ARM DEN 0056A ("ARM System Control and Management Interface Platform Design Document")[0] provide for OSPM in the device tree. @@ -73,6 +73,16 @@ Required properties: as used by the firmware. Refer to platform details for your implementation for the IDs to use. +Reset signal bindings for the reset domains based on SCMI Message Protocol +------------------------------------------------------------ + +This binding for the SCMI reset domain providers uses the generic reset +signal binding[5]. + +Required properties: + - #reset-cells : Should be 1. Contains the reset domain ID value used + by SCMI commands. + SRAM and Shared Memory for SCMI ------------------------------- @@ -93,6 +103,7 @@ Required sub-node properties: [2] Documentation/devicetree/bindings/power/power_domain.txt [3] Documentation/devicetree/bindings/thermal/thermal.txt [4] Documentation/devicetree/bindings/sram/sram.txt +[5] Documentation/devicetree/bindings/reset/reset.txt Example: @@ -152,6 +163,11 @@ firmware { reg = <0x15>; #thermal-sensor-cells = <1>; }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; }; }; @@ -166,6 +182,7 @@ hdlcd@7ff60000 { reg = <0 0x7ff60000 0 0x1000>; clocks = <&scmi_clk 4>; power-domains = <&scmi_devpd 1>; + resets = <&scmi_reset 10>; }; thermal-zones { diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index abff8d834a6a..b2a9f9f8430b 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -197,9 +197,9 @@ Required nodes: The description for the board must include: - a "psci" node describing the boot method used for the secondary CPUs. A detailed description of the bindings used for "psci" nodes is present - in the psci.txt file. + in the psci.yaml file. - a "cpus" node describing the available cores and their associated - "enable-method"s. For more details see cpus.txt file. + "enable-method"s. For more details see cpus.yaml file. Example: diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt deleted file mode 100644 index 99dee23c74a4..000000000000 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ /dev/null @@ -1,73 +0,0 @@ -Atmel AT91 device tree bindings. -================================ - -Boards with a SoC of the Atmel AT91 or SMART family shall have the following -properties: - -Required root node properties: -compatible: must be one of: - * "atmel,at91rm9200" - - * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with - the specific SoC family or compatible: - o "atmel,at91sam9260" - o "atmel,at91sam9261" - o "atmel,at91sam9263" - o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific - SoC compatible: - - "atmel,at91sam9g15" - - "atmel,at91sam9g25" - - "atmel,at91sam9g35" - - "atmel,at91sam9x25" - - "atmel,at91sam9x35" - o "atmel,at91sam9g20" - o "atmel,at91sam9g45" - o "atmel,at91sam9n12" - o "atmel,at91sam9rl" - o "atmel,at91sam9xe" - o "microchip,sam9x60" - * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific - SoC family: - o "atmel,sama5d2" shall be extended with the specific SoC compatible: - - "atmel,sama5d27" - o "atmel,sama5d3" shall be extended with the specific SoC compatible: - - "atmel,sama5d31" - - "atmel,sama5d33" - - "atmel,sama5d34" - - "atmel,sama5d35" - - "atmel,sama5d36" - o "atmel,sama5d4" shall be extended with the specific SoC compatible: - - "atmel,sama5d41" - - "atmel,sama5d42" - - "atmel,sama5d43" - - "atmel,sama5d44" - - * "atmel,samv7" for MCUs using a Cortex-M7, shall be extended with the specific - SoC family: - o "atmel,sams70" shall be extended with the specific MCU compatible: - - "atmel,sams70j19" - - "atmel,sams70j20" - - "atmel,sams70j21" - - "atmel,sams70n19" - - "atmel,sams70n20" - - "atmel,sams70n21" - - "atmel,sams70q19" - - "atmel,sams70q20" - - "atmel,sams70q21" - o "atmel,samv70" shall be extended with the specific MCU compatible: - - "atmel,samv70j19" - - "atmel,samv70j20" - - "atmel,samv70n19" - - "atmel,samv70n20" - - "atmel,samv70q19" - - "atmel,samv70q20" - o "atmel,samv71" shall be extended with the specific MCU compatible: - - "atmel,samv71j19" - - "atmel,samv71j20" - - "atmel,samv71j21" - - "atmel,samv71n19" - - "atmel,samv71n20" - - "atmel,samv71n21" - - "atmel,samv71q19" - - "atmel,samv71q20" - - "atmel,samv71q21" diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml new file mode 100644 index 000000000000..6e168abcd4d1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/atmel-at91.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel AT91 device tree bindings. + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Ludovic Desroches <ludovic.desroches@microchip.com> + +description: | + Boards with a SoC of the Atmel AT91 or SMART family shall have the following + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - const: atmel,at91rm9200 + - items: + - enum: + - olimex,sam9-l9260 + - enum: + - atmel,at91sam9260 + - atmel,at91sam9261 + - atmel,at91sam9263 + - atmel,at91sam9g20 + - atmel,at91sam9g45 + - atmel,at91sam9n12 + - atmel,at91sam9rl + - atmel,at91sam9xe + - atmel,at91sam9x60 + - const: atmel,at91sam9 + + - items: + - enum: + - atmel,at91sam9g15 + - atmel,at91sam9g25 + - atmel,at91sam9g35 + - atmel,at91sam9x25 + - atmel,at91sam9x35 + - const: atmel,at91sam9x5 + - const: atmel,at91sam9 + + - items: + - const: atmel,sama5d27 + - const: atmel,sama5d2 + - const: atmel,sama5 + + - description: Nattis v2 board with Natte v2 power board + items: + - const: axentia,nattis-2 + - const: axentia,natte-2 + - const: axentia,linea + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - description: TSE-850 v3 board + items: + - const: axentia,tse850v3 + - const: axentia,linea + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - items: + - const: axentia,linea + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - items: + - enum: + - atmel,sama5d31 + - atmel,sama5d33 + - atmel,sama5d34 + - atmel,sama5d35 + - atmel,sama5d36 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - items: + - enum: + - atmel,sama5d41 + - atmel,sama5d42 + - atmel,sama5d43 + - atmel,sama5d44 + - const: atmel,sama5d4 + - const: atmel,sama5 + + - items: + - enum: + - atmel,sams70j19 + - atmel,sams70j20 + - atmel,sams70j21 + - atmel,sams70n19 + - atmel,sams70n20 + - atmel,sams70n21 + - atmel,sams70q19 + - atmel,sams70q20 + - atmel,sams70q21 + - const: atmel,sams70 + - const: atmel,samv7 + + - items: + - enum: + - atmel,samv70j19 + - atmel,samv70j20 + - atmel,samv70n19 + - atmel,samv70n20 + - atmel,samv70q19 + - atmel,samv70q20 + - const: atmel,samv70 + - const: atmel,samv7 + + - items: + - enum: + - atmel,samv71j19 + - atmel,samv71j20 + - atmel,samv71j21 + - atmel,samv71n19 + - atmel,samv71n20 + - atmel,samv71n21 + - atmel,samv71q19 + - atmel,samv71q20 + - atmel,samv71q21 + - const: atmel,samv71 + - const: atmel,samv7 + +... diff --git a/Documentation/devicetree/bindings/arm/axxia.txt b/Documentation/devicetree/bindings/arm/axxia.txt deleted file mode 100644 index 7b4ef9c07696..000000000000 --- a/Documentation/devicetree/bindings/arm/axxia.txt +++ /dev/null @@ -1,12 +0,0 @@ -Axxia AXM55xx device tree bindings - -Boards using the AXM55xx SoC need to have the following properties: - -Required root node property: - - - compatible = "lsi,axm5516" - -Boards: - - LSI AXM5516 Validation board (Amarillo) - compatible = "lsi,axm5516-amarillo", "lsi,axm5516" diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml new file mode 100644 index 000000000000..98780a569f22 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/axxia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axxia AXM55xx device tree bindings + +maintainers: + - Anders Berg <anders.berg@lsi.com> + +properties: + compatible: + description: LSI AXM5516 Validation board (Amarillo) + items: + - const: lsi,axm5516-amarillo + - const: lsi,axm5516 + +... diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt index 298291211ea4..f1de3247c1b7 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt @@ -26,8 +26,8 @@ Required properties: processor core is clocked by the internal CPU clock, so it is enabled with CPU clock by default. -- cpu : the CPU phandle the debug module is affined to. When omitted - the module is considered to belong to CPU0. +- cpu : the CPU phandle the debug module is affined to. Do not assume it + to default to CPU0 if omitted. Optional properties: diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 8a88ddebc1a2..fcc3bacfd8bc 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -59,6 +59,11 @@ its hardware characteristcs. * port or ports: see "Graph bindings for Coresight" below. +* Additional required property for Embedded Trace Macrocell (version 3.x and + version 4.x): + * cpu: the cpu phandle this ETM/PTM is affined to. Do not + assume it to default to CPU0 if omitted. + * Additional required properties for System Trace Macrocells (STM): * reg: along with the physical base address and length of the register set as described above, another entry is required to describe the @@ -87,9 +92,6 @@ its hardware characteristcs. * arm,cp14: must be present if the system accesses ETM/PTM management registers via co-processor 14. - * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the - source is considered to belong to CPU0. - * Optional property for TMC: * arm,buffer-size: size of contiguous buffer space for TMC ETR diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 591bbd012d63..cb30895e3b67 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -39,281 +39,245 @@ description: |+ described below. properties: - $nodename: - const: cpus - description: Container of cpu nodes - - '#address-cells': - enum: [1, 2] + reg: + maxItems: 1 description: | - Definition depends on ARM architecture version and configuration: + Usage and definition depend on ARM architecture version and + configuration: On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - '#size-cells': - const: 0 - -patternProperties: - '^cpu@[0-9a-f]+$': - type: object - properties: - device_type: - const: cpu - - reg: - maxItems: 1 - description: | - Usage and definition depend on ARM architecture version and - configuration: - - On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a55 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,kryo485 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. - * If cpus node's #address-cells property is set to 2 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. + * arm/msm/qcom,saw2.txt - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. - * If cpus node's #address-cells property is set to 1 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. + * arm/msm/qcom,kpss-acc.txt - All other bits in the reg cells must be set to 0. + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. - compatible: - items: - - enum: - - arm,arm710t - - arm,arm720t - - arm,arm740t - - arm,arm7ej-s - - arm,arm7tdmi - - arm,arm7tdmi-s - - arm,arm9es - - arm,arm9ej-s - - arm,arm920t - - arm,arm922t - - arm,arm925 - - arm,arm926e-s - - arm,arm926ej-s - - arm,arm940t - - arm,arm946e-s - - arm,arm966e-s - - arm,arm968e-s - - arm,arm9tdmi - - arm,arm1020e - - arm,arm1020t - - arm,arm1022e - - arm,arm1026ej-s - - arm,arm1136j-s - - arm,arm1136jf-s - - arm,arm1156t2-s - - arm,arm1156t2f-s - - arm,arm1176jzf - - arm,arm1176jz-s - - arm,arm1176jzf-s - - arm,arm11mpcore - - arm,armv8 # Only for s/w models - - arm,cortex-a5 - - arm,cortex-a7 - - arm,cortex-a8 - - arm,cortex-a9 - - arm,cortex-a12 - - arm,cortex-a15 - - arm,cortex-a17 - - arm,cortex-a53 - - arm,cortex-a57 - - arm,cortex-a72 - - arm,cortex-a73 - - arm,cortex-m0 - - arm,cortex-m0+ - - arm,cortex-m1 - - arm,cortex-m3 - - arm,cortex-m4 - - arm,cortex-r4 - - arm,cortex-r5 - - arm,cortex-r7 - - brcm,brahma-b15 - - brcm,brahma-b53 - - brcm,vulcan - - cavium,thunder - - cavium,thunder2 - - faraday,fa526 - - intel,sa110 - - intel,sa1100 - - marvell,feroceon - - marvell,mohawk - - marvell,pj4a - - marvell,pj4b - - marvell,sheeva-v5 - - marvell,sheeva-v7 - - nvidia,tegra132-denver - - nvidia,tegra186-denver - - nvidia,tegra194-carmel - - qcom,krait - - qcom,kryo - - qcom,kryo385 - - qcom,scorpion - - enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - - description: - Required for systems that have an "enable-method" - property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: | - List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). - - capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - u32 value representing CPU capacity (see ./cpu-capacity.txt) in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - - qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the SAW* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,saw2.txt - - qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the ACC* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,kpss-acc.txt - - rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the syscon node controlling the cpu core power domains. - - Optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - - required: - - device_type - - reg - - compatible - - dependencies: - cpu-release-addr: [enable-method] - rockchip,pmu: [enable-method] + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. required: - - '#address-cells' - - '#size-cells' + - device_type + - reg + - compatible + +dependencies: + rockchip,pmu: [enable-method] examples: - | diff --git a/Documentation/devicetree/bindings/arm/digicolor.txt b/Documentation/devicetree/bindings/arm/digicolor.txt deleted file mode 100644 index 658553f40b23..000000000000 --- a/Documentation/devicetree/bindings/arm/digicolor.txt +++ /dev/null @@ -1,6 +0,0 @@ -Conexant Digicolor Platforms Device Tree Bindings - -Each device tree must specify which Conexant Digicolor SoC it uses. -Must be the following compatible string: - - cnxt,cx92755 diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml new file mode 100644 index 000000000000..d9c80b827e9b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/digicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Conexant Digicolor Platforms Device Tree Bindings + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + compatible: + const: cnxt,cx92755 + +... diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt b/Documentation/devicetree/bindings/arm/emtrion.txt deleted file mode 100644 index 83329aefc483..000000000000 --- a/Documentation/devicetree/bindings/arm/emtrion.txt +++ /dev/null @@ -1,12 +0,0 @@ -Emtrion Devicetree Bindings -=========================== - -emCON Series: -------------- - -Required root node properties - - compatible: - - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM - - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base - - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM - - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 5d7dbabbb784..c149fadc6f47 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -133,6 +133,30 @@ RTC bindings based on SCU Message Protocol Required properties: - compatible: should be "fsl,imx8qxp-sc-rtc"; +OCOTP bindings based on SCU Message Protocol +------------------------------------------------------------ +Required properties: +- compatible: Should be one of: + "fsl,imx8qm-scu-ocotp", + "fsl,imx8qxp-scu-ocotp". +- #address-cells: Must be 1. Contains byte index +- #size-cells: Must be 1. Contains byte length + +Optional Child nodes: + +- Data cells of ocotp: + Detailed bindings are described in bindings/nvmem/nvmem.txt + +Watchdog bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be: + "fsl,imx8qxp-sc-wdt" + followed by "fsl,imx-sc-wdt"; +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example (imx8qxp): ------------- aliases { @@ -177,6 +201,16 @@ firmware { ... }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 8>; + }; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; @@ -185,6 +219,11 @@ firmware { rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; }; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 407138ebc0d0..1b4b4e6573b5 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -15,6 +15,13 @@ properties: const: '/' compatible: oneOf: + - description: i.MX1 based Boards + items: + - enum: + - armadeus,imx1-apf9328 + - fsl,imx1ads + - const: fsl,imx1 + - description: i.MX23 based Boards items: - enum: @@ -51,6 +58,25 @@ properties: - const: i2se,duckbill-2 - const: fsl,imx28 + - description: i.MX31 based Boards + items: + - enum: + - buglabs,imx31-bug + - logicpd,imx31-lite + - const: fsl,imx31 + + - description: i.MX35 based Boards + items: + - enum: + - fsl,imx35-pdk + - const: fsl,imx35 + + - description: i.MX35 Eukrea CPUIMX35 Board + items: + - const: eukrea,mbimxsd35-baseboard + - const: eukrea,cpuimx35 + - const: fsl,imx35 + - description: i.MX50 based Boards items: - enum: @@ -80,6 +106,8 @@ properties: - description: i.MX6Q based Boards items: - enum: + - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM + - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base - fsl,imx6q-arm2 - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite @@ -99,6 +127,8 @@ properties: items: - enum: - eckelmann,imx6dl-ci4x10 + - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM + - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board - technologic,imx6dl-ts4900 @@ -131,6 +161,20 @@ properties: items: - enum: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - kontron,imx6ul-n6310-som # Kontron N6310 SOM + - const: fsl,imx6ul + + - description: Kontron N6310 S Board + items: + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som + - const: fsl,imx6ul + + - description: Kontron N6310 S 43 Board + items: + - const: kontron,imx6ul-n6310-s-43 + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul - description: i.MX6ULL based Boards @@ -156,7 +200,9 @@ properties: items: - enum: - fsl,imx7d-sdb # i.MX7 SabreSD Board + - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM + - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -171,15 +217,38 @@ properties: - const: compulab,cl-som-imx7 - const: fsl,imx7d + - description: i.MX7ULP based Boards + items: + - enum: + - fsl,imx7ulp-evk # i.MX7ULP Evaluation Kit + - const: fsl,imx7ulp + - description: i.MX8MM based Boards items: - enum: - fsl,imx8mm-evk # i.MX8MM EVK Board - const: fsl,imx8mm + - description: i.MX8MN based Boards + items: + - enum: + - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board + - const: fsl,imx8mn + + - description: i.MX8MQ based Boards + items: + - enum: + - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board + - fsl,imx8mq-evk # i.MX8MQ EVK Board + - purism,librem5-devkit # Purism Librem5 devkit + - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse + - technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk + - const: fsl,imx8mq + - description: i.MX8QXP based Boards items: - enum: + - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - const: fsl,imx8qxp @@ -239,6 +308,7 @@ properties: - description: LS1046A based Boards items: - enum: + - fsl,ls1046a-frwy - fsl,ls1046a-qds - fsl,ls1046a-rdb - const: fsl,ls1046a diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 45730ba60af5..771f5d20ae18 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -28,7 +28,7 @@ PM implementation to put the processor in different idle states (which include states listed above; "off" state is not an idle state since it does not have wake-up capabilities, hence it is not considered in this document). -Idle state parameters (eg entry latency) are platform specific and need to be +Idle state parameters (e.g. entry latency) are platform specific and need to be characterized with bindings that provide the required information to OS PM code so that it can build the required tables and use them at runtime. @@ -90,24 +90,24 @@ These timing parameters can be used by an OS in different circumstances. An idle CPU requires the expected min-residency time to select the most appropriate idle state based on the expected expiry time of the next IRQ -(ie wake-up) that causes the CPU to return to the EXEC phase. +(i.e. wake-up) that causes the CPU to return to the EXEC phase. An operating system scheduler may need to compute the shortest wake-up delay for CPUs in the system by detecting how long will it take to get a CPU out -of an idle state, eg: +of an idle state, e.g.: wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) In other words, the scheduler can make its scheduling decision by selecting -(eg waking-up) the CPU with the shortest wake-up latency. -The wake-up latency must take into account the entry latency if that period +(e.g. waking-up) the CPU with the shortest wake-up delay. +The wake-up delay must take into account the entry latency if that period has not expired. The abortable nature of the PREP period can be ignored if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than -the worst case since it depends on the CPU operating conditions, ie caches +the worst case since it depends on the CPU operating conditions, i.e. caches state). An OS has to reliably probe the wakeup-latency since some devices can enforce -latency constraints guarantees to work properly, so the OS has to detect the +latency constraint guarantees to work properly, so the OS has to detect the worst case wake-up latency it can incur if a CPU is allowed to enter an idle state, and possibly to prevent that to guarantee reliable device functioning. @@ -183,15 +183,15 @@ and IDLE2: Graph 2: idle states min-residency example In graph 2 above, that takes into account idle states entry/exit energy -costs, it is clear that if the idle state residency time (ie time till next +costs, it is clear that if the idle state residency time (i.e. time till next wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state choice energywise. This is mainly down to the fact that IDLE1 entry/exit energy costs are lower than IDLE2. -However, the lower power consumption (ie shallower energy curve slope) of idle -state IDLE2 implies that after a suitable time, IDLE2 becomes more energy +However, the lower power consumption (i.e. shallower energy curve slope) of +idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy efficient. The time at which IDLE2 becomes more energy efficient than IDLE1 (and other @@ -214,8 +214,8 @@ processor idle states, defined as device tree nodes, are listed. Usage: Optional - On ARM systems, it is a container of processor idle states nodes. If the system does not provide CPU - power management capabilities or the processor just - supports idle_standby an idle-states node is not + power management capabilities, or the processor just + supports idle_standby, an idle-states node is not required. Description: idle-states node is a container node, where its @@ -241,9 +241,13 @@ processor idle states, defined as device tree nodes, are listed. - "psci" # On ARM 32-bit systems this property is optional -The nodes describing the idle states (state) can only be defined within the -idle-states node, any other configuration is considered invalid and therefore -must be ignored. +This assumes that the "enable-method" property is set to "psci" in the cpu +node[6] that is responsible for setting up CPU idle management in the OS +implementation. + +The nodes describing the idle states (state) can only be defined +within the idle-states node, any other configuration is considered invalid +and therefore must be ignored. =========================================== 4 - state node @@ -283,14 +287,14 @@ follows: Value type: <prop-encoded-array> Definition: u32 value representing worst case latency in microseconds required to enter the idle state. - The exit-latency-us duration may be guaranteed - only after entry-latency-us has passed. - exit-latency-us Usage: Required Value type: <prop-encoded-array> Definition: u32 value representing worst case latency in microseconds required to exit the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. - min-residency-us Usage: Required @@ -338,8 +342,8 @@ follows: state. In addition to the properties listed above, a state node may require - additional properties specifics to the entry-method defined in the - idle-states node, please refer to the entry-method bindings + additional properties specific to the entry-method defined in the + idle-states node. Please refer to the entry-method bindings documentation for properties definitions. =========================================== @@ -687,7 +691,7 @@ cpus { Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings - Documentation/devicetree/bindings/arm/psci.txt + Documentation/devicetree/bindings/arm/psci.yaml [3] ARM Server Base System Architecture (SBSA) http://infocenter.arm.com/help/index.jsp @@ -697,3 +701,6 @@ cpus { [5] Devicetree Specification https://www.devicetree.org/specifications/ + +[6] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.rst diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index bfc5c185561c..913a8cd8b2c0 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -176,6 +176,10 @@ properties: description: disable parity checking on the L2 cache (L220 or PL310). type: boolean + marvell,ecc-enable: + description: enable ECC protection on the L2 cache + type: boolean + arm,outer-sync-disable: description: disable the outer sync operation on the L2 cache. Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt index 7b8b8eb0191f..26410fbb85be 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt @@ -18,17 +18,19 @@ Clocks: ------- -The Device Tree node representing the AP806 system controller provides -a number of clocks: +The Device Tree node representing the AP806/AP807 system controller +provides a number of clocks: - - 0: clock of CPU cluster 0 - - 1: clock of CPU cluster 1 + - 0: reference clock of CPU cluster 0 + - 1: reference clock of CPU cluster 1 - 2: fixed PLL at 1200 Mhz - 3: MSS clock, derived from the fixed PLL Required properties: - - compatible: must be: "marvell,ap806-clock" + - compatible: must be one of: + * "marvell,ap806-clock" + * "marvell,ap807-clock" - #clock-cells: must be set to 1 Pinctrl: @@ -143,3 +145,33 @@ ap_syscon1: system-controller@6f8000 { #thermal-sensor-cells = <1>; }; }; + +Cluster clocks: +--------------- + +Device Tree Clock bindings for cluster clock of Marvell +AP806/AP807. Each cluster contain up to 2 CPUs running at the same +frequency. + +Required properties: + - compatible: must be one of: + * "marvell,ap806-cpu-clock" + * "marvell,ap807-cpu-clock" +- #clock-cells : should be set to 1. + +- clocks : shall be the input parent clock(s) phandle for the clock + (one per cluster) + +- reg: register range associated with the cluster clocks + +ap_syscon1: system-controller@6f8000 { + compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt index eddde4faef01..f6d6642d81c0 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt @@ -48,3 +48,11 @@ avs: avs@11500 { compatible = "marvell,armada-3700-avs", "syscon"; reg = <0x11500 0x40>; } + + +CZ.NIC's Turris Mox SOHO router Device Tree Bindings +---------------------------------------------------- + +Required root node property: + + - compatible: must contain "cznic,turris-mox" diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index 4db4119a6d19..f982a8ed9396 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -78,8 +78,8 @@ Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. Required properties: -- compatible: "marvell,armada-7k-pinctrl", - "marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl" +- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl", + "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl" depending on the specific variant of the SoC being used. Available mpp pins/groups and functions: diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt deleted file mode 100644 index 56ac7896d6d8..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ /dev/null @@ -1,89 +0,0 @@ -MediaTek SoC based Platforms Device Tree Bindings - -Boards with a MediaTek SoC shall have the following property: - -Required root node property: - -compatible: Must contain one of - "mediatek,mt2701" - "mediatek,mt2712" - "mediatek,mt6580" - "mediatek,mt6589" - "mediatek,mt6592" - "mediatek,mt6755" - "mediatek,mt6765" - "mediatek,mt6795" - "mediatek,mt6797" - "mediatek,mt7622" - "mediatek,mt7623" - "mediatek,mt7629" - "mediatek,mt8127" - "mediatek,mt8135" - "mediatek,mt8173" - "mediatek,mt8183" - - -Supported boards: - -- Evaluation board for MT2701: - Required root node properties: - - compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; -- Evaluation board for MT2712: - Required root node properties: - - compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; -- Evaluation board for MT6580: - Required root node properties: - - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; -- bq Aquaris5 smart phone: - Required root node properties: - - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; -- Evaluation board for MT6592: - Required root node properties: - - compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; -- Evaluation phone for MT6755(Helio P10): - Required root node properties: - - compatible = "mediatek,mt6755-evb", "mediatek,mt6755"; -- Evaluation board for MT6765(Helio P22): - Required root node properties: - - compatible = "mediatek,mt6765-evb", "mediatek,mt6765"; -- Evaluation board for MT6795(Helio X10): - Required root node properties: - - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; -- Evaluation board for MT6797(Helio X20): - Required root node properties: - - compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; -- Mediatek X20 Development Board: - Required root node properties: - - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; -- Reference board variant 1 for MT7622: - Required root node properties: - - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; -- Bananapi BPI-R64 for MT7622: - Required root node properties: - - compatible = "bananapi,bpi-r64", "mediatek,mt7622"; -- Reference board for MT7623a with eMMC: - Required root node properties: - - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; -- Reference board for MT7623a with NAND: - Required root node properties: - - compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623"; -- Reference board for MT7623n with eMMC: - Required root node properties: - - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623"; -- Bananapi BPI-R2 board: - - compatible = "bananapi,bpi-r2", "mediatek,mt7623"; -- Reference board for MT7629: - Required root node properties: - - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; -- MTK mt8127 tablet moose EVB: - Required root node properties: - - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; -- MTK mt8135 tablet EVB: - Required root node properties: - - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; -- MTK mt8173 tablet EVB: - Required root node properties: - - compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; -- Evaluation board for MT8183: - Required root node properties: - - compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml new file mode 100644 index 000000000000..4043c5046441 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mediatek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoC based Platforms Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + - Matthias Brugger <matthias.bgg@gmail.com> +description: | + Boards with a MediaTek SoC shall have the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-evb + - const: mediatek,mt2701 + + - items: + - enum: + - mediatek,mt2712-evb + - const: mediatek,mt2712 + - items: + - enum: + - mediatek,mt6580-evbp1 + - const: mediatek,mt6580 + - items: + - enum: + - mundoreader,bq-aquaris5 + - const: mediatek,mt6589 + - items: + - enum: + - mediatek,mt6592-evb + - const: mediatek,mt6592 + - items: + - enum: + - mediatek,mt6755-evb + - const: mediatek,mt6755 + - items: + - enum: + - mediatek,mt6765-evb + - const: mediatek,mt6765 + - items: + - enum: + - mediatek,mt6779-evb + - const: mediatek,mt6779 + - items: + - enum: + - mediatek,mt6795-evb + - const: mediatek,mt6795 + - items: + - enum: + - archermind,mt6797-x20-dev + - mediatek,mt6797-evb + - const: mediatek,mt6797 + - items: + - enum: + - bananapi,bpi-r64 + - mediatek,mt7622-rfb1 + - const: mediatek,mt7622 + - items: + - enum: + - mediatek,mt7623a-rfb-emmc + - mediatek,mt7623a-rfb-nand + - mediatek,mt7623n-rfb-emmc + - bananapi,bpi-r2 + - const: mediatek,mt7623 + + - items: + - enum: + - mediatek,mt7629-rfb + - const: mediatek,mt7629 + - items: + - enum: + - mediatek,mt8127-moose + - const: mediatek,mt8127 + - items: + - enum: + - mediatek,mt8135-evbp1 + - const: mediatek,mt8135 + - items: + - enum: + - mediatek,mt8173-evb + - const: mediatek,mt8173 + - items: + - enum: + - mediatek,mt8183-evb + - const: mediatek,mt8183 +... diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index 161e63a6c254..ff000ccade78 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" - "mediatek,mt2712-apmixedsys", "syscon" + - "mediatek,mt6779-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" - "mediatek,mt7622-apmixedsys" - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index f3cef1a6d95c..e4ca7b703123 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -7,9 +7,11 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-audsys", "syscon" + - "mediatek,mt6779-audio", "syscon" - "mediatek,mt7622-audsys", "syscon" - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - "mediatek,mt8183-audiosys", "syscon" + - "mediatek,mt8516-audsys", "syscon" - #clock-cells: Must be 1 The AUDSYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt index d8930f64aa98..1f4aaa15a37e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt @@ -6,6 +6,7 @@ The MediaTek camsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt6779-camsys", "syscon" - "mediatek,mt8183-camsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index e3bc4a1e7a6e..2b693e343c56 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt2712-imgsys", "syscon" + - "mediatek,mt6779-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index a90913988d7e..db2f4fd754e7 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -9,6 +9,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" - "mediatek,mt2712-infracfg", "syscon" + - "mediatek,mt6779-infracfg_ao", "syscon" - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt new file mode 100644 index 000000000000..2ce889b023d9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt @@ -0,0 +1,22 @@ +Mediatek ipesys controller +============================ + +The Mediatek ipesys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt6779-ipesys", "syscon" +- #clock-cells: Must be 1 + +The ipesys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ipesys: clock-controller@1b000000 { + compatible = "mediatek,mt6779-ipesys", "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt index 72787e7dd227..ad5f9d2f6818 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2712-mfgcfg", "syscon" + - "mediatek,mt6779-mfgcfg", "syscon" - "mediatek,mt8183-mfgcfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 545eab717c96..301eefbe1618 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt2712-mmsys", "syscon" + - "mediatek,mt6779-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index 4c7e478117a0..ecf027a9003a 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -14,6 +14,7 @@ Required Properties: - "mediatek,mt7629-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" + - "mediatek,mt8183-pericfg", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index a023b8338960..0293d693ce0c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" - "mediatek,mt2712-topckgen", "syscon" + - "mediatek,mt6779-topckgen", "syscon" - "mediatek,mt6797-topckgen" - "mediatek,mt7622-topckgen" - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index 57176bb8dbb5..7894558b7a1c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt2712-vdecsys", "syscon" + - "mediatek,mt6779-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index c9faa6269087..6a6a14e15cd7 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2712-vencsys", "syscon" + - "mediatek,mt6779-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - "mediatek,mt8183-vencsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt deleted file mode 100644 index 11087edb0658..000000000000 --- a/Documentation/devicetree/bindings/arm/moxart.txt +++ /dev/null @@ -1,12 +0,0 @@ -MOXA ART device tree bindings - -Boards with the MOXA ART SoC shall have the following properties: - -Required root node property: - -compatible = "moxa,moxart"; - -Boards: - -- UC-7112-LX: embedded computer - compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml new file mode 100644 index 000000000000..c068df59fad2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/moxart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MOXA ART device tree bindings + +maintainers: + - Jonas Jensen <jonas.jensen@gmail.com> + +properties: + compatible: + description: UC-7112-LX embedded computer + items: + - const: moxa,moxart-uc-7112-lx + - const: moxa,moxart + +... diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt deleted file mode 100644 index 56ec8ddc4a3b..000000000000 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt +++ /dev/null @@ -1,8 +0,0 @@ -NXP LPC32xx Platforms Device Tree Bindings ------------------------------------------- - -Boards with the NXP LPC32xx SoC shall have the following properties: - -Required root node property: - -compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml new file mode 100644 index 000000000000..07f39d3eee7e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Platforms Device Tree Bindings + +maintainers: + - Roland Stigge <stigge@antcom.de> + +properties: + compatible: + oneOf: + - enum: + - nxp,lpc3220 + - nxp,lpc3230 + - nxp,lpc3240 + - items: + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 + +... diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 1c1e48fd94b5..b301f753ed2c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -160,6 +160,9 @@ Boards: - AM335X phyCORE-AM335x: Development kit compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" +- AM335x phyBOARD-REGOR: Single Board Computer + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx" + - AM335X UC-8100-ME-T: Communication-centric industrial computing platform compatible = "moxa,uc-8100-me-t", "ti,am33xx"; diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt deleted file mode 100644 index a2c4f1d52492..000000000000 --- a/Documentation/devicetree/bindings/arm/psci.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Power State Coordination Interface (PSCI) - -Firmware implementing the PSCI functions described in ARM document number -ARM DEN 0022A ("Power State Coordination Interface System Software on ARM -processors") can be used by Linux to initiate various CPU-centric power -operations. - -Issue A of the specification describes functions for CPU suspend, hotplug -and migration of secure software. - -Functions are invoked by trapping to the privilege level of the PSCI -firmware (specified as part of the binding below) and passing arguments -in a manner similar to that specified by AAPCS: - - r0 => 32-bit Function ID / return value - {r1 - r3} => Parameters - -Note that the immediate field of the trapping instruction must be set -to #0. - - -Main node required properties: - - - compatible : should contain at least one of: - - * "arm,psci" : For implementations complying to PSCI versions prior - to 0.2. - For these cases function IDs must be provided. - - * "arm,psci-0.2" : For implementations complying to PSCI 0.2. - Function IDs are not required and should be ignored by - an OS with PSCI 0.2 support, but are permitted to be - present for compatibility with existing software when - "arm,psci" is later in the compatible list. - - * "arm,psci-1.0" : For implementations complying to PSCI 1.0. - PSCI 1.0 is backward compatible with PSCI 0.2 with - minor specification updates, as defined in the PSCI - specification[2]. - - - method : The method of calling the PSCI firmware. Permitted - values are: - - "smc" : SMC #0, with the register assignments specified - in this binding. - - "hvc" : HVC #0, with the register assignments specified - in this binding. - -Main node optional properties: - - - cpu_suspend : Function ID for CPU_SUSPEND operation - - - cpu_off : Function ID for CPU_OFF operation - - - cpu_on : Function ID for CPU_ON operation - - - migrate : Function ID for MIGRATE operation - -Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle -state nodes, as per bindings in [1]) must specify the following properties: - -- arm,psci-suspend-param - Usage: Required for state nodes[1] if the corresponding - idle-states node entry-method property is set - to "psci". - Value type: <u32> - Definition: power_state parameter to pass to the PSCI - suspend call. - -Example: - -Case 1: PSCI v0.1 only. - - psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x95c10000>; - cpu_off = <0x95c10001>; - cpu_on = <0x95c10002>; - migrate = <0x95c10003>; - }; - -Case 2: PSCI v0.2 only - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - -Case 3: PSCI v0.2 and PSCI v0.1. - - A DTB may provide IDs for use by kernels without PSCI 0.2 support, - enabling firmware and hypervisors to support existing and new kernels. - These IDs will be ignored by kernels with PSCI 0.2 support, which will - use the standard PSCI 0.2 IDs exclusively. - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "hvc"; - - cpu_on = < arbitrary value >; - cpu_off = < arbitrary value >; - - ... - }; - -[1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[2] Power State Coordination Interface (PSCI) specification - http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml new file mode 100644 index 000000000000..7abdf58b335e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/psci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power State Coordination Interface (PSCI) + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + Firmware implementing the PSCI functions described in ARM document number + ARM DEN 0022A ("Power State Coordination Interface System Software on ARM + processors") can be used by Linux to initiate various CPU-centric power + operations. + + Issue A of the specification describes functions for CPU suspend, hotplug + and migration of secure software. + + Functions are invoked by trapping to the privilege level of the PSCI + firmware (specified as part of the binding below) and passing arguments + in a manner similar to that specified by AAPCS: + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + + Note that the immediate field of the trapping instruction must be set + to #0. + + [2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf + +properties: + compatible: + oneOf: + - description: + For implementations complying to PSCI versions prior to 0.2. + const: arm,psci + + - description: + For implementations complying to PSCI 0.2. + const: arm,psci-0.2 + + - description: + For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by an OS with + PSCI 0.2 support, but are permitted to be present for compatibility + with existing software when "arm,psci" is later in the compatible + list. + items: + - const: arm,psci-0.2 + - const: arm,psci + + - description: + For implementations complying to PSCI 1.0. + const: arm,psci-1.0 + + - description: + For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with minor + specification updates, as defined in the PSCI specification[2]. + items: + - const: arm,psci-1.0 + - const: arm,psci-0.2 + + method: + description: The method of calling the PSCI firmware. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - enum: + # SMC #0, with the register assignments specified in this binding. + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc + + cpu_suspend: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_SUSPEND operation + + cpu_off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_OFF operation + + cpu_on: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_ON operation + + migrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for MIGRATE operation + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie + idle state nodes with entry-method property is set to "psci", as per + bindings in [1]) must specify this property. + + [1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt + + +required: + - compatible + - method + +allOf: + - if: + properties: + compatible: + contains: + const: arm,psci + then: + required: + - cpu_off + - cpu_on + +examples: + - |+ + + // Case 1: PSCI v0.1 only. + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x95c10000>; + cpu_off = <0x95c10001>; + cpu_on = <0x95c10002>; + migrate = <0x95c10003>; + }; + + - |+ + + // Case 2: PSCI v0.2 only + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + + - |+ + + // Case 3: PSCI v0.2 and PSCI v0.1. + + /* + * A DTB may provide IDs for use by kernels without PSCI 0.2 support, + * enabling firmware and hypervisors to support existing and new kernels. + * These IDs will be ignored by kernels with PSCI 0.2 support, which will + * use the standard PSCI 0.2 IDs exclusively. + */ + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "hvc"; + + cpu_on = <0x95c10002>; + cpu_off = <0x95c10001>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index f6316ab66385..e39d8f02e33c 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -45,6 +45,7 @@ description: | mtp sbc hk01 + qrd The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> where the minor number may be omitted when it's zero, i.e. v1.0 is the same @@ -102,14 +103,35 @@ properties: - const: qcom,msm8960 - items: + - enum: + - fairphone,fp2 + - lge,hammerhead + - sony,xperia-amami + - sony,xperia-castor + - sony,xperia-honami + - const: qcom,msm8974 + + - items: - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp - const: qcom,msm8916 - items: + - enum: + - longcheer,l8150 + - samsung,a3u-eur + - samsung,a5u-eur + - const: qcom,msm8916 + + - items: - const: qcom,msm8996-mtp - items: + - enum: + - qcom,ipq4019-ap-dk04.1-c3 + - qcom,ipq4019-ap-dk07.1-c1 + - qcom,ipq4019-ap-dk07.1-c2 + - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 - items: diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt deleted file mode 100644 index 43c80762c428..000000000000 --- a/Documentation/devicetree/bindings/arm/rda.txt +++ /dev/null @@ -1,17 +0,0 @@ -RDA Micro platforms device tree bindings ----------------------------------------- - -RDA8810PL SoC -============= - -Required root node properties: - - - compatible : must contain "rda,8810pl" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" - - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml new file mode 100644 index 000000000000..51cec2b63b04 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro platforms device tree bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + items: + - enum: + - xunlong,orangepi-2g-iot # Orange Pi 2G-IoT + - xunlong,orangepi-i96 # Orange Pi i96 + - const: rda,8810pl + +... diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt deleted file mode 100644 index 95839e19ae92..000000000000 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ /dev/null @@ -1,22 +0,0 @@ -Realtek platforms device tree bindings --------------------------------------- - - -RTD1295 SoC -=========== - -Required root node properties: - - - compatible : must contain "realtek,rtd1295" - - -Root node property compatible must contain, depending on board: - - - MeLE V9: "mele,v9" - - ProBox2 AVA: "probox2,ava" - - Zidoo X9S: "zidoo,x9s" - - -Example: - - compatible = "zidoo,x9s", "realtek,rtd1295"; diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml new file mode 100644 index 000000000000..3528b61963b4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/realtek.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/realtek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek platforms device tree bindings + +maintainers: + - Andreas Färber <afaerber@suse.de> + +properties: + $nodename: + const: '/' + compatible: + # RTD1295 SoC based boards + items: + - enum: + - mele,v9 + - probox2,ava + - zidoo,x9s + - const: realtek,rtd1295 +... diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 19f379863d50..28eb458f761a 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/shmobile.yaml# +$id: http://devicetree.org/schemas/arm/renesas.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings @@ -106,6 +106,14 @@ properties: - description: RZ/G2M (R8A774A1) items: + - enum: + - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform + - const: renesas,r8a774a1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2m - const: renesas,r8a774a1 - description: RZ/G2E (R8A774C0) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 5c6bbf10abc9..c82c5e57d44c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -128,6 +128,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Fievel (AOPEN Chromebox Mini) + items: + - const: google,veyron-fievel-rev8 + - const: google,veyron-fievel-rev7 + - const: google,veyron-fievel-rev6 + - const: google,veyron-fievel-rev5 + - const: google,veyron-fievel-rev4 + - const: google,veyron-fievel-rev3 + - const: google,veyron-fievel-rev2 + - const: google,veyron-fievel-rev1 + - const: google,veyron-fievel-rev0 + - const: google,veyron-fievel + - const: google,veyron + - const: rockchip,rk3288 + - description: Google Gru (dev-board) items: - const: google,gru-rev15 @@ -311,11 +326,49 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Tiger (AOpen Chromebase Mini) + items: + - const: google,veyron-tiger-rev8 + - const: google,veyron-tiger-rev7 + - const: google,veyron-tiger-rev6 + - const: google,veyron-tiger-rev5 + - const: google,veyron-tiger-rev4 + - const: google,veyron-tiger-rev3 + - const: google,veyron-tiger-rev2 + - const: google,veyron-tiger-rev1 + - const: google,veyron-tiger-rev0 + - const: google,veyron-tiger + - const: google,veyron + - const: rockchip,rk3288 + - description: Haoyu MarsBoard RK3066 items: - const: haoyu,marsboard-rk3066 - const: rockchip,rk3066a + - description: Hugsun X99 TV Box + items: + - const: hugsun,x99 + - const: rockchip,rk3399 + + - description: Khadas Edge series boards + items: + - enum: + - khadas,edge + - khadas,edge-captain + - khadas,edge-v + - const: rockchip,rk3399 + + - description: Mecer Xtreme Mini S6 + items: + - const: mecer,xms6 + - const: rockchip,rk3229 + + - description: Leez RK3399 P710 + items: + - const: leez,p710 + - const: rockchip,rk3399 + - description: mqmaker MiQi items: - const: mqmaker,miqi @@ -411,11 +464,6 @@ properties: - rockchip,rk3288-evb-rk808 - const: rockchip,rk3288 - - description: Rockchip RK3288 Fennec - items: - - const: rockchip,rk3288-fennec - - const: rockchip,rk3288 - - description: Rockchip RK3328 Evaluation board items: - const: rockchip,rk3328-evb diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml index aae53fc3cb1e..2bd519d2e855 100644 --- a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/milbeaut.yaml# +$id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Milbeaut platforms device tree bindings diff --git a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt new file mode 100644 index 000000000000..25307aa1eb9b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt @@ -0,0 +1,37 @@ +ML-AHB interconnect bindings + +These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects +a Cortex-M subsystem with dedicated memories. +The MCU SRAM and RETRAM memory parts can be accessed through different addresses +(see "RAM aliases" in [1]) using different buses (see [2]) : balancing the +Cortex-M firmware accesses among those ports allows to tune the system +performance. + +[1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf +[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping + +Required properties: +- compatible: should be "simple-bus" +- dma-ranges: describes memory addresses translation between the local CPU and + the remote Cortex-M processor. Each memory region, is declared with + 3 parameters: + - param 1: device base address (Cortex-M processor address) + - param 2: physical base address (local CPU address) + - param 3: size of the memory region. + +The Cortex-M remote processor accessed via the mlahb interconnect is described +by a child node. + +Example: +mlahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; + + m4_rproc: m4@10000000 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.txt b/Documentation/devicetree/bindings/arm/stm32/stm32.txt deleted file mode 100644 index 6808ed9ddfd5..000000000000 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.txt +++ /dev/null @@ -1,10 +0,0 @@ -STMicroelectronics STM32 Platforms Device Tree Bindings - -Each device tree must specify which STM32 SoC it uses, -using one of the following compatible strings: - - st,stm32f429 - st,stm32f469 - st,stm32f746 - st,stm32h743 - st,stm32mp157 diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml new file mode 100644 index 000000000000..4d194f1eb03a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/stm32/stm32.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Platforms Device Tree Bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + +properties: + compatible: + oneOf: + - items: + - const: st,stm32f429 + + - items: + - const: st,stm32f469 + + - items: + - const: st,stm32f746 + + - items: + - const: st,stm32h743 + + - items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - const: st,stm32mp157 +... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 285f4fc8519d..972b1e9ee804 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -263,7 +263,7 @@ properties: - description: ICNova A20 SWAC items: - - const: swac,icnova-a20-swac + - const: incircuit,icnova-a20-swac - const: incircuit,icnova-a20 - const: allwinner,sun7i-a20 @@ -353,6 +353,12 @@ properties: - const: licheepi,licheepi-zero - const: allwinner,sun8i-v3s + - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash) + items: + - const: sipeed,lichee-zero-plus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + - description: Linksprite PCDuino items: - const: linksprite,a10-pcduino @@ -568,6 +574,11 @@ properties: - const: olimex,a64-olinuxino - const: allwinner,sun50i-a64 + - description: Olimex A64-OlinuXino (with eMMC) + items: + - const: olimex,a64-olinuxino-emmc + - const: allwinner,sun50i-a64 + - description: Olimex A64 Teres-I items: - const: olimex,a64-teres-i @@ -671,6 +682,11 @@ properties: - const: sinlinx,sina33 - const: allwinner,sun8i-a33 + - description: Tanix TX6 + items: + - const: oranth,tanix-tx6 + - const: allwinner,sun50i-h6 + - description: TBS A711 Tablet items: - const: tbs-biometrics,a711 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt index 6a059cabb2da..333e7256126a 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.txt +++ b/Documentation/devicetree/bindings/arm/ti/k3.txt @@ -13,6 +13,9 @@ architecture it uses, using one of the following compatible values: - AM654 compatible = "ti,am654"; +- J721E + compatible = "ti,j721e"; + Boards ------ diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml index 4326d2cfa15d..a8765ba29476 100644 --- a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml +++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/ti/davinci.yaml# +$id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments DaVinci Platforms Device Tree Bindings diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt deleted file mode 100644 index b0d80c0fb265..000000000000 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ /dev/null @@ -1,475 +0,0 @@ -=========================================== -ARM topology binding description -=========================================== - -=========================================== -1 - Introduction -=========================================== - -In an ARM system, the hierarchy of CPUs is defined through three entities that -are used to describe the layout of physical CPUs in the system: - -- cluster -- core -- thread - -The cpu nodes (bindings defined in [1]) represent the devices that -correspond to physical CPUs and are to be mapped to the hierarchy levels. - -The bottom hierarchy level sits at core or thread level depending on whether -symmetric multi-threading (SMT) is supported or not. - -For instance in a system where CPUs support SMT, "cpu" nodes represent all -threads existing in the system and map to the hierarchy level "thread" above. -In systems where SMT is not supported "cpu" nodes represent all cores present -in the system and map to the hierarchy level "core" above. - -ARM topology bindings allow one to associate cpu nodes with hierarchical groups -corresponding to the system hierarchy; syntactically they are defined as device -tree nodes. - -The remainder of this document provides the topology bindings for ARM, based -on the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -If not stated otherwise, whenever a reference to a cpu node phandle is made its -value must point to a cpu node compliant with the cpu node bindings as -documented in [1]. -A topology description containing phandles to cpu nodes that are not compliant -with bindings standardized in [1] is therefore considered invalid. - -=========================================== -2 - cpu-map node -=========================================== - -The ARM CPU topology is defined within the cpu-map node, which is a direct -child of the cpus node and provides a container where the actual topology -nodes are listed. - -- cpu-map node - - Usage: Optional - On ARM SMP systems provide CPUs topology to the OS. - ARM uniprocessor systems do not require a topology - description and therefore should not define a - cpu-map node. - - Description: The cpu-map node is just a container node where its - subnodes describe the CPU topology. - - Node name must be "cpu-map". - - The cpu-map node's parent node must be the cpus node. - - The cpu-map node's child nodes can be: - - - one or more cluster nodes - - Any other configuration is considered invalid. - -The cpu-map node can only contain three types of child nodes: - -- cluster node -- core node -- thread node - -whose bindings are described in paragraph 3. - -The nodes describing the CPU topology (cluster/core/thread) can only -be defined within the cpu-map node and every core/thread in the system -must be defined within the topology. Any other configuration is -invalid and therefore must be ignored. - -=========================================== -2.1 - cpu-map child nodes naming convention -=========================================== - -cpu-map child nodes must follow a naming convention where the node name -must be "clusterN", "coreN", "threadN" depending on the node type (ie -cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which -are siblings within a single common parent node must be given a unique and -sequential N value, starting from 0). -cpu-map child nodes which do not share a common parent node can have the same -name (ie same number N as other cpu-map child nodes at different device tree -levels) since name uniqueness will be guaranteed by the device tree hierarchy. - -=========================================== -3 - cluster/core/thread node bindings -=========================================== - -Bindings for cluster/cpu/thread nodes are defined as follows: - -- cluster node - - Description: must be declared within a cpu-map node, one node - per cluster. A system can contain several layers of - clustering and cluster nodes can be contained in parent - cluster nodes. - - The cluster node name must be "clusterN" as described in 2.1 above. - A cluster node can not be a leaf node. - - A cluster node's child nodes must be: - - - one or more cluster nodes; or - - one or more core nodes - - Any other configuration is considered invalid. - -- core node - - Description: must be declared in a cluster node, one node per core in - the cluster. If the system does not support SMT, core - nodes are leaf nodes, otherwise they become containers of - thread nodes. - - The core node name must be "coreN" as described in 2.1 above. - - A core node must be a leaf node if SMT is not supported. - - Properties for core nodes that are leaf nodes: - - - cpu - Usage: required - Value type: <phandle> - Definition: a phandle to the cpu node that corresponds to the - core node. - - If a core node is not a leaf node (CPUs supporting SMT) a core node's - child nodes can be: - - - one or more thread nodes - - Any other configuration is considered invalid. - -- thread node - - Description: must be declared in a core node, one node per thread - in the core if the system supports SMT. Thread nodes are - always leaf nodes in the device tree. - - The thread node name must be "threadN" as described in 2.1 above. - - A thread node must be a leaf node. - - A thread node must contain the following property: - - - cpu - Usage: required - Value type: <phandle> - Definition: a phandle to the cpu node that corresponds to - the thread node. - -=========================================== -4 - Example dts -=========================================== - -Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters): - -cpus { - #size-cells = <0>; - #address-cells = <2>; - - cpu-map { - cluster0 { - cluster0 { - core0 { - thread0 { - cpu = <&CPU0>; - }; - thread1 { - cpu = <&CPU1>; - }; - }; - - core1 { - thread0 { - cpu = <&CPU2>; - }; - thread1 { - cpu = <&CPU3>; - }; - }; - }; - - cluster1 { - core0 { - thread0 { - cpu = <&CPU4>; - }; - thread1 { - cpu = <&CPU5>; - }; - }; - - core1 { - thread0 { - cpu = <&CPU6>; - }; - thread1 { - cpu = <&CPU7>; - }; - }; - }; - }; - - cluster1 { - cluster0 { - core0 { - thread0 { - cpu = <&CPU8>; - }; - thread1 { - cpu = <&CPU9>; - }; - }; - core1 { - thread0 { - cpu = <&CPU10>; - }; - thread1 { - cpu = <&CPU11>; - }; - }; - }; - - cluster1 { - core0 { - thread0 { - cpu = <&CPU12>; - }; - thread1 { - cpu = <&CPU13>; - }; - }; - core1 { - thread0 { - cpu = <&CPU14>; - }; - thread1 { - cpu = <&CPU15>; - }; - }; - }; - }; - }; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU4: cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU5: cpu@10001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU6: cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU7: cpu@10101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU8: cpu@100000000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU9: cpu@100000001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU10: cpu@100000100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU11: cpu@100000101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU12: cpu@100010000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU13: cpu@100010001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU14: cpu@100010100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU15: cpu@100010101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; -}; - -Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT): - -cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - core1 { - cpu = <&CPU1>; - }; - core2 { - cpu = <&CPU2>; - }; - core3 { - cpu = <&CPU3>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU4>; - }; - core1 { - cpu = <&CPU5>; - }; - core2 { - cpu = <&CPU6>; - }; - core3 { - cpu = <&CPU7>; - }; - }; - }; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - }; - - CPU4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - }; - - CPU5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - }; - - CPU6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - }; - - CPU7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - }; -}; - -=============================================================================== -[1] ARM Linux kernel documentation - Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt index c9b9321434ea..db5c56db30ec 100644 --- a/Documentation/devicetree/bindings/arm/xen.txt +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -54,7 +54,7 @@ hypervisor { }; The format and meaning of the "xen,uefi-*" parameters are similar to those in -Documentation/arm/uefi.txt, which are provided by the regular UEFI stub. However +Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However they differ because they are provided by the Xen hypervisor, together with a set of UEFI runtime services implemented via hypercalls, see http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html. |