aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/chosen.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/chosen.txt')
-rw-r--r--Documentation/devicetree/bindings/chosen.txt46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
new file mode 100644
index 000000000000..ed838f453f7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -0,0 +1,46 @@
+The chosen node
+---------------
+
+The chosen node does not represent a real device, but serves as a place
+for passing data between firmware and the operating system, like boot
+arguments. Data in the chosen node does not represent the hardware.
+
+
+stdout-path property
+--------------------
+
+Device trees may specify the device to be used for boot console output
+with a stdout-path property under /chosen, as described in ePAPR, e.g.
+
+/ {
+ chosen {
+ stdout-path = "/serial@f00:115200";
+ };
+
+ serial@f00 {
+ compatible = "vendor,some-uart";
+ reg = <0xf00 0x10>;
+ };
+};
+
+If the character ":" is present in the value, this terminates the path.
+The meaning of any characters following the ":" is device-specific, and
+must be specified in the relevant binding documentation.
+
+For UART devices, the preferred binding is a string in the form:
+
+ <baud>{<parity>{<bits>{<flow>}}}
+
+where
+
+ baud - baud rate in decimal
+ parity - 'n' (none), 'o', (odd) or 'e' (even)
+ bits - number of data bits
+ flow - 'r' (rts)
+
+For example: 115200n8r
+
+Implementation note: Linux will look for the property "linux,stdout-path" or
+on PowerPC "stdout" if "stdout-path" is not found. However, the
+"linux,stdout-path" and "stdout" properties are deprecated. New platforms
+should only use the "stdout-path" property.