1 files changed, 0 insertions, 98 deletions
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
deleted file mode 100644
index 268ca615459e..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Device tree Clock bindings for Renesas EMMA Mobile EV2
-
-This binding uses the common clock binding.
-
-* SMU
-System Management Unit described in user's manual R19UH0037EJ1000_SMU.
-This is not a clock provider, but clocks under SMU depend on it.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu"
-- reg: Address and Size of SMU registers
-
-* SMU_CLKDIV
-Function block with an input mux and a divider, which corresponds to
-"Serial clock generator" in fig."Clock System Overview" of the manual,
-and "xxx frequency division setting register" (XXXCLKDIV) registers.
-This makes internal (neither input nor output) clock that is provided
-to input of xxxGCLK block.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-clkdiv"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-* SMU_GCLK
-Clock gating node shown as "Clock stop processing block" in the
-fig."Clock System Overview" of the manual.
-Registers are "xxx clock gate control register" (XXXGCLKCTRL).
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-gclk"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Input clock as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-Example of provider:
-
-usia_u0_sclkdiv: usia_u0_sclkdiv {
-	compatible = "renesas,emev2-smu-clkdiv";
-	reg = <0x610 0>;
-	clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
-	#clock-cells = <0>;
-};
-
-usia_u0_sclk: usia_u0_sclk {
-	compatible = "renesas,emev2-smu-gclk";
-	reg = <0x4a0 1>;
-	clocks = <&usia_u0_sclkdiv>;
-	#clock-cells = <0>;
-};
-
-Example of consumer:
-
-serial@e1020000 {
-	compatible = "renesas,em-uart";
-	reg = <0xe1020000 0x38>;
-	interrupts = <0 8 0>;
-	clocks = <&usia_u0_sclk>;
-	clock-names = "sclk";
-};
-
-Example of clock-tree description:
-
- This describes a clock path in the clock tree
-  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
-
-smu@e0110000 {
-	compatible = "renesas,emev2-smu";
-	reg = <0xe0110000 0x10000>;
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	c32ki: c32ki {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-	pll3_fo: pll3_fo {
-		compatible = "fixed-factor-clock";
-		clocks = <&c32ki>;
-		clock-div = <1>;
-		clock-mult = <7000>;
-		#clock-cells = <0>;
-	};
-	usia_u0_sclkdiv: usia_u0_sclkdiv {
-		compatible = "renesas,emev2-smu-clkdiv";
-		reg = <0x610 0>;
-		clocks = <&pll3_fo>;
-		#clock-cells = <0>;
-	};
-	usia_u0_sclk: usia_u0_sclk {
-		compatible = "renesas,emev2-smu-gclk";
-		reg = <0x4a0 1>;
-		clocks = <&usia_u0_sclkdiv>;
-		#clock-cells = <0>;
-	};
-};