diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/sunxi.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/clock/sunxi.txt | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt deleted file mode 100644 index 1a042e20b115..000000000000 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ /dev/null @@ -1,225 +0,0 @@ -Device Tree Clock bindings for arch-sunxi - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "allwinner,sun4i-a10-osc-clk" - for a gatable oscillator - "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4 - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 - "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23 - "allwinner,sun4i-a10-pll3-clk" - for the video PLL clock on A10 - "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80 - "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock - "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock - "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 - "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80 - "allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-a10-axi-clk" - for the AXI clock - "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 - "allwinner,sun4i-a10-gates-clk" - for generic gates on all compatible SoCs - "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates - "allwinner,sun4i-a10-ahb-clk" - for the AHB clock - "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 - "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 - "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 - "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 - "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s - "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 - "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 - "allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80 - "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31 - "allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3 - "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 - "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23 - "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80 - "allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80 - "allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80 - "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock - "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31 - "allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23 - "allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80 - "allwinner,sun8i-a83t-apb0-gates-clk" - for the APB0 gates on A83T - "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10 - "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 - "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s - "allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31 - "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20 - "allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23 - "allwinner,sun8i-h3-apb0-gates-clk" - for the APB0 gates on H3 - "allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80 - "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock - "allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80 - "allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10 - "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13 - "allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s - "allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31 - "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20 - "allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23 - "allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80 - "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 - "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 - "allwinner,sun8i-a83t-bus-gates-clk" - for the bus gates on A83T - "allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3 - "allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80 - "allwinner,sun4i-a10-display-clk" - for the display clocks on the A10 - "allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10 - "allwinner,sun5i-a13-dram-gates-clk" - for the DRAM gates on A13 - "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 - "allwinner,sun4i-a10-mmc-clk" - for the MMC clock - "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80 - "allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80 - "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks - "allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80 - "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 - "allwinner,sun7i-a20-out-clk" - for the external output clocks - "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 - "allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10 - "allwinner,sun4i-a10-tcon-ch1-clk" - for the TCON channel 1 clock on the A10 - "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 - "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 - "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 - "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23 - "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3 - "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 - "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 - "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock - "allwinner,sun6i-a31-display-clk" - for the display clocks - -Required properties for all clocks: -- reg : shall be the control register address for the clock. -- clocks : shall be the input parent clock(s) phandle for the clock. For - multiplexed clocks, the list order must match the hardware - programming order. -- #clock-cells : from common clock binding; shall be set to 0 except for - the following compatibles where it shall be set to 1: - "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk", - "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk", - "allwinner,*-usb-clk", "allwinner,*-mmc-clk", - "allwinner,*-mmc-config-clk" -- clock-output-names : shall be the corresponding names of the outputs. - If the clock module only has one output, the name shall be the - module name. - -And "allwinner,*-usb-clk" clocks also require: -- reset-cells : shall be set to 1 - -The "allwinner,sun4i-a10-ve-clk" clock also requires: -- reset-cells : shall be set to 0 - -The "allwinner,sun9i-a80-mmc-config-clk" clock also requires: -- #reset-cells : shall be set to 1 -- resets : shall be the reset control phandle for the mmc block. - -For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate -dummy clocks at 25 MHz and 125 MHz, respectively. See example. - -Clock consumers should specify the desired clocks they use with a -"clocks" phandle cell. Consumers that are using a gated clock should -provide an additional ID in their clock property. This ID is the -offset of the bit controlling this particular gate in the register. -For the other clocks with "#clock-cells" = 1, the additional ID shall -refer to the index of the output. - -For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output -is the normal PLL6 output, or "pll6". The second output is rate doubled -PLL6, or "pll6x2". - -The "allwinner,*-mmc-clk" clocks have three different outputs: the -main clock, with the ID 0, and the output and sample clocks, with the -IDs 1 and 2, respectively. - -The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output -per mmc controller. The number of outputs is determined by the size of -the address block, which is related to the overall mmc block. - -For example: - -osc24M: clk@1c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc24M_fixed>; - clock-output-names = "osc24M"; -}; - -pll1: clk@1c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; -}; - -pll5: clk@1c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; -}; - -pll6: clk@1c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; -}; - -cpu: cpu@1c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>; - clock-output-names = "cpu"; -}; - -mmc0_clk: clk@1c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", "mmc0_output", "mmc0_sample"; -}; - -mii_phy_tx_clk: clk@2 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "mii_phy_tx"; -}; - -gmac_int_tx_clk: clk@3 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_int_tx"; -}; - -gmac_clk: clk@1c20164 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-gmac-clk"; - reg = <0x01c20164 0x4>; - /* - * The first clock must be fixed at 25MHz; - * the second clock must be fixed at 125MHz - */ - clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; - clock-output-names = "gmac"; -}; - -mmc_config_clk: clk@1c13000 { - compatible = "allwinner,sun9i-a80-mmc-config-clk"; - reg = <0x01c13000 0x10>; - clocks = <&ahb0_gates 8>; - clock-names = "ahb"; - resets = <&ahb0_resets 8>; - reset-names = "ahb"; - #clock-cells = <1>; - #reset-cells = <1>; - clock-output-names = "mmc0_config", "mmc1_config", - "mmc2_config", "mmc3_config"; -}; |