diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
-rw-r--r-- | Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/qcom,gcc.txt | 21 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt | 7 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt (renamed from Documentation/devicetree/bindings/clock/emev2-clock.txt) | 0 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt | 60 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/clock/ti,cdce925.txt | 4 |
7 files changed, 95 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index fa4d143a73de..64938fdaea55 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -31,6 +31,7 @@ properties: - allwinner,sun8i-h3-ccu - allwinner,sun8i-h3-r-ccu - allwinner,sun8i-r40-ccu + - allwinner,sun8i-v3-ccu - allwinner,sun8i-v3s-ccu - allwinner,sun9i-a80-ccu - allwinner,sun50i-a64-ccu diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt index dd906db34b32..9e0b03a6519b 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -12,7 +12,9 @@ clock generators, but a few (like the ARM or HDMI) will source from the PLL dividers directly. Required properties: -- compatible: Should be "brcm,bcm2835-cprman" +- compatible: should be one of the following, + "brcm,bcm2711-cprman" + "brcm,bcm2835-cprman" - #clock-cells: Should be <1>. The permitted clock-specifier values can be found in include/dt-bindings/clock/bcm2835.h - reg: Specifies base physical address and size of the registers diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 8661c3cd3ccf..d14362ad4132 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -23,6 +23,7 @@ Required properties : "qcom,gcc-sdm630" "qcom,gcc-sdm660" "qcom,gcc-sdm845" + "qcom,gcc-sm8150" - reg : shall contain base register location and length - #clock-cells : shall contain 1 @@ -38,6 +39,13 @@ Documentation/devicetree/bindings/thermal/qcom-tsens.txt - protected-clocks : Protected clock specifier list as per common clock binding. +For SM8150 only: + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: "bi_tcxo" (required) + "sleep_clk" (optional) + "aud_ref_clock" (optional) + Example: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; @@ -71,3 +79,16 @@ Example of GCC with protected-clocks properties: <GCC_LPASS_Q6_AXI_CLK>, <GCC_LPASS_SWAY_CLK>; }; + +Example of GCC with clocks + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x00100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt index 3c007653da31..365bbde599b1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmh-clk.txt @@ -6,9 +6,14 @@ some Qualcomm Technologies Inc. SoCs. It accepts clock requests from other hardware subsystems via RSC to control clocks. Required properties : -- compatible : shall contain "qcom,sdm845-rpmh-clk" +- compatible : must be one of: + "qcom,sdm845-rpmh-clk" + "qcom,sm8150-rpmh-clk" - #clock-cells : must contain 1 +- clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. +- clock-names: Parent board clock: "xo". Example : diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt index 268ca615459e..268ca615459e 100644 --- a/Documentation/devicetree/bindings/clock/emev2-clock.txt +++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt new file mode 100644 index 000000000000..9b151c5b0c90 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt @@ -0,0 +1,60 @@ +* Rockchip RK3308 Clock and Reset Unit + +The RK3308 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: CRU should be "rockchip,rk3308-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing, pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in", + "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in", + "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional, + - "mac_clkin" - external MAC clock - optional + +Example: Clock controller node: + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt index 0d01f2d5cc36..26544c85202a 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -24,6 +24,8 @@ Required properties: Optional properties: - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a board, or to compensate for external influences. +- vdd-supply: A regulator node for Vdd +- vddout-supply: A regulator node for Vddout For all PLL1, PLL2, ... an optional child node can be used to specify spread spectrum clocking parameters for a board. @@ -41,6 +43,8 @@ Example: clocks = <&xtal_27Mhz>; #clock-cells = <1>; xtal-load-pf = <5>; + vdd-supply = <&1v8-reg>; + vddout-supply = <&3v3-reg>; /* PLL options to get SSC 1% centered */ PLL2 { spread-spectrum = <4>; |