1 files changed, 0 insertions, 78 deletions
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};