diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/display/arm,pl11x.yaml | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml new file mode 100644 index 000000000000..6cc9045e5c68 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,pl11x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm PrimeCell Color LCD Controller PL110/PL111 + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out + a framebuffer region in system memory, and creates timed signals for + a variety of LCD panels. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl110 + - arm,pl111 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,pl110 + - arm,pl111 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupt-names: + oneOf: + - const: combined + description: + The IP provides four individual interrupt lines, but also one + combined line. If the integration only connects this line to the + interrupt controller, this single interrupt is noted here. + - items: + - const: mbe # CLCDMBEINTR + - const: vcomp # CLCDVCOMPINTR + - const: lnbu # CLCDLNBUINTR + - const: fuf # CLCDFUFINTR + + interrupts: + minItems: 1 + maxItems: 4 + + clock-names: + items: + - const: clcdclk + - const: apb_pclk + + clocks: + items: + - description: The CLCDCLK reference clock for the controller. + - description: The HCLK AHB slave clock for the register access. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum bandwidth in bytes per second that the cell's memory interface + can handle. + If not present, the memory interface is fast enough to handle all + possible video modes. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + arm,pl11x,tft-r0g0b0-pads: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: index of CLD pad used for first red bit (R0) + - description: index of CLD pad used for first green bit (G0) + - description: index of CLD pad used for first blue bit (G0) + deprecated: true + description: | + DEPRECATED. An array of three 32-bit values, defining the way + CLD[23:0] pads are wired up. + The first value contains the index of the "CLD" external pin (pad) + used as R0 (first bit of the red component), the second value for + green, the third value for blue. + See also "LCD panel signal multiplexing details" paragraphs in the + PL110/PL111 Technical Reference Manuals. + This implicitly defines available color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + +additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - port + +allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + required: + - interrupt-names + +examples: + - | + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <44>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + }; + }; + }; + + panel { + compatible = "arm,rtsm-display"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; +... |