diff options
Diffstat (limited to '')
-rw-r--r-- | Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt deleted file mode 100644 index 0f57c3143506..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt +++ /dev/null @@ -1,36 +0,0 @@ -Sharp 15" LQ150X1LG11 XGA TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq150x1lg11" -- power-supply: regulator to provide the VCC supply voltage (3.3 volts) - -Optional properties: -- backlight: phandle of the backlight device -- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. -- sellvds-gpios: a single GPIO for the SELLVDS pin. - -If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS -pins are assumed to be handled appropriately by the hardware. - -Example: - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 100000>; /* VBR */ - - brightness-levels = <0 20 40 60 80 100>; - default-brightness-level = <2>; - - power-supply = <&vdd_12v_reg>; /* VDD */ - enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ - }; - - panel { - compatible = "sharp,lq150x1lg11"; - - power-supply = <&vcc_3v3_reg>; /* VCC */ - - backlight = <&backlight>; - rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ - sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ - }; |