diff options
Diffstat (limited to '')
7 files changed, 337 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml new file mode 100644 index 000000000000..a8f3afa922c8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED + video mode panel module on MIPI-DSI 4-Lane interface, GGRB + pixel arrangement, 63 micrometers pitch, with an active + area of 68.04 x 136.08 millimeters. + Each pixel is divided into red and green dots, or blue and + green dots, and two pixels share red or blue dots which are + arranged in vertical stripe. + The DriverIC for this panel module is SW43404. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: boe,bf060y8m-aj0 + + elvdd-supply: + description: EL Driving positive (VDD) supply (4.40-4.80V) + elvss-supply: + description: EL Driving negative (VSS) supply (-5.00V to -1.40V) + vcc-supply: + description: Core (TSP) voltage supply (2.70-3.60V) + vci-supply: + description: DriverIC Operation supply (2.60-3.60V) + vddio-supply: + description: I/O voltage supply (1.62-1.98V) + + port: true + reg: true + reset-gpios: true + +required: + - compatible + - elvdd-supply + - elvss-supply + - vcc-supply + - vci-supply + - vddio-supply + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + vcc-supply = <&disp_vcc_vreg>; + vddio-supply = <&disp_vddio_vreg>; + vci-supply = <&disp_vci_vreg>; + elvdd-supply = <&disp_elvdd_vreg>; + elvss-supply = <&disp_elvss_vreg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml new file mode 100644 index 000000000000..7e7a8362b951 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9163 display panels device tree bindings + +maintainers: + - Daniel Mack <daniel@zonque.org> + +description: + This binding is for display panels using an Ilitek ILI9163 controller in SPI + mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - newhaven,1.8-128160EF + - const: ilitek,ili9163 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index b2fcec4f22fd..c5d1df680858 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -9,24 +9,28 @@ title: Ilitek ILI9881c based MIPI-DSI panels maintainers: - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: - enum: - bananapi,lhr050h41 - feixin,k101-im2byl02 + - wanchanglong,w552946aba - const: ilitek,ili9881c backlight: true power-supply: true reg: true reset-gpios: true + rotation: true required: - compatible - power-supply - reg - - reset-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml new file mode 100644 index 000000000000..377a05d48a02 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35950-based display panels + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, + with Static RAM for content retention in command mode and also supports + video mode with VESA Frame Buffer Compression or Display Stream Compression + on single, or dual dsi port(s). + This DDIC is also capable of upscaling an input image to the panel's native + resolution, for example it can upscale a 1920x1080 input to 3840x2160 with + either bilinear interpolation or pixel duplication. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls055d1sx04 + - const: novatek,nt35950 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35950 panel driver. The compatible + string determines how the NT35950 panel driver shall be configured + to work with the indicated panel. The novatek,nt35950 compatible shall + always be provided as a fallback. + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + avdd-supply: + description: positive boost supply regulator + avee-supply: + description: negative boost supply regulator + dvdd-supply: + description: regulator that supplies the digital voltage + vddio-supply: + description: regulator that supplies the I/O voltage + + backlight: true + ports: true + reg: true + +required: + - compatible + - reg + - reset-gpios + - avdd-supply + - avee-supply + - dvdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls055d1sx04", "novatek,nt35950"; + reg = <0>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&lab>; + avee-supply = <&ibb>; + dvdd-supply = <&disp_dvdd_vreg>; + vddio-supply = <&vreg_l14a_1p85>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index fbd71669248f..2c00813f5d20 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -35,6 +35,8 @@ properties: - boe,tv080wum-nl0 # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel - innolux,p079zca + # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel + - jdi,fhd-r63452 # Khadas TS050 5" 1080x1920 LCD panel - khadas,ts050 # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index f3c9395d23b6..62f5f050c1bc 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -290,6 +290,8 @@ properties: - starry,kr070pe2t # Starry 12.2" (1920x1200 pixels) TFT LCD panel - starry,kr122ea0sra + # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel + - team-source-display,tst043015cmhx # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - tianma,tm070jdhg30 # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml new file mode 100644 index 000000000000..967972939598 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which + can be found no Sony Xperia M4 phone. The panel backlight is managed + through DSI link. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,tulip-truly-nt35521 + + reg: true + + positive5-supply: + description: Positive 5V supply + + negative5-supply: + description: Negative 5V supply + + reset-gpios: true + + enable-gpios: true + + port: true + +required: + - compatible + - reg + - positive5-supply + - negative5-supply + - reset-gpios + - enable-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,tulip-truly-nt35521"; + reg = <0>; + positive5-supply = <&positive5_reg>; + negative5-supply = <&negative5_reg>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... |