aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt74
1 files changed, 0 insertions, 74 deletions
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
deleted file mode 100644
index 3d32ce137e7f..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Rockchip DWC HDMI TX Encoder
-============================
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with a companion PHY IP.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-
-Required properties:
-
-- compatible: should be one of the following:
- "rockchip,rk3228-dw-hdmi"
- "rockchip,rk3288-dw-hdmi"
- "rockchip,rk3328-dw-hdmi"
- "rockchip,rk3399-dw-hdmi"
-- reg: See dw_hdmi.txt.
-- reg-io-width: See dw_hdmi.txt. Shall be 4.
-- interrupts: HDMI interrupt number
-- clocks: See dw_hdmi.txt.
-- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
-- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
- corresponding to the video input of the controller. The port shall have two
- endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
-- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
-
-Optional properties
-
-- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
- or the functionally-reduced I2C master contained in the DWC HDMI. When
- connected to a system I2C master this property contains a phandle to that
- I2C master controller.
-- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
-- clock-names: May contain "cec" as defined in dw_hdmi.txt.
-- clock-names: May contain "grf", power for grf io.
-- clock-names: May contain "vpll", external clock for some hdmi phy.
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "hdmi" if phys references an external phy.
-
-Optional pinctrl entry:
-- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
- will switch to the unwedge pinctrl state for 10ms if it ever gets an
- i2c timeout. It's intended that this unwedge pinctrl entry will
- cause the SDA line to be driven low to work around a hardware
- errata.
-
-Example:
-
-hdmi: hdmi@ff980000 {
- compatible = "rockchip,rk3288-dw-hdmi";
- reg = <0xff980000 0x20000>;
- reg-io-width = <4>;
- ddc-i2c-bus = <&i2c5>;
- rockchip,grf = <&grf>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
- clock-names = "iahb", "isfr";
- ports {
- hdmi_in: port {
- #address-cells = <1>;
- #size-cells = <0>;
- hdmi_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_hdmi>;
- };
- hdmi_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_hdmi>;
- };
- };
- };
-};