2 files changed, 50 insertions, 27 deletions
diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
new file mode 100644
index 000000000000..a905c1413558
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
@@ -0,0 +1,50 @@
+DesignWare HDMI bridge bindings
+
+Required properties:
+- compatible: platform specific such as:
+   * "snps,dw-hdmi-tx"
+   * "fsl,imx6q-hdmi"
+   * "fsl,imx6dl-hdmi"
+   * "rockchip,rk3288-dw-hdmi"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The HDMI interrupt number
+- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
+  as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
+  the clocks are soc specific, the clock-names should be "iahb", "isfr"
+-port@[X]: SoC specific port nodes with endpoint definitions as defined
+   in Documentation/devicetree/bindings/media/video-interfaces.txt,
+   please refer to the SoC specific binding document:
+    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
+    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+
+Optional properties
+- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+	hdmi: hdmi@0120000 {
+		compatible = "fsl,imx6q-hdmi";
+		reg = <0x00120000 0x9000>;
+		interrupts = <0 115 0x04>;
+		gpr = <&gpr>;
+		clocks = <&clks 123>, <&clks 124>;
+		clock-names = "iahb", "isfr";
+		ddc-i2c-bus = <&i2c2>;
+
+		port@0 {
+			reg = <0>;
+
+			hdmi_mux_0: endpoint {
+				remote-endpoint = <&ipu1_di0_hdmi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			hdmi_mux_1: endpoint {
+				remote-endpoint = <&ipu1_di1_hdmi>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt b/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt
deleted file mode 100644
index 52b93b2c6748..000000000000
--- a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification
-	- reset-gpio: OF device-tree gpio specification
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-	};