diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt')
-rw-r--r-- | Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt deleted file mode 100644 index 023c9526e5f8..000000000000 --- a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt +++ /dev/null @@ -1,40 +0,0 @@ -NVIDIA Tegra GPIO controller - -Required properties: -- compatible : "nvidia,tegra<chip>-gpio" -- reg : Physical base address and length of the controller's registers. -- interrupts : The interrupt outputs from the controller. For Tegra20, - there should be 7 interrupts specified, and for Tegra30, there should - be 8 interrupts specified. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) -- gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. - The first cell is the GPIO number. - The second cell is used to specify flags: - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - Valid combinations are 1, 2, 3, 4, 8. -- interrupt-controller : Marks the device node as an interrupt controller. - -Example: - -gpio: gpio@6000d000 { - compatible = "nvidia,tegra20-gpio"; - reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 >; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; -}; |