diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 123 |
1 files changed, 0 insertions, 123 deletions
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt deleted file mode 100644 index ae63f09fda7d..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ /dev/null @@ -1,123 +0,0 @@ -ARM Mali Utgard GPU -=================== - -Required properties: - - compatible - * Must be one of the following: - + "arm,mali-300" - + "arm,mali-400" - + "arm,mali-450" - * And, optionally, one of the vendor specific compatible: - + allwinner,sun4i-a10-mali - + allwinner,sun7i-a20-mali - + allwinner,sun8i-h3-mali - + allwinner,sun50i-a64-mali - + allwinner,sun50i-h5-mali - + amlogic,meson8-mali - + amlogic,meson8b-mali - + amlogic,meson-gxbb-mali - + amlogic,meson-gxl-mali - + rockchip,rk3036-mali - + rockchip,rk3066-mali - + rockchip,rk3188-mali - + rockchip,rk3228-mali - + rockchip,rk3328-mali - + stericsson,db8500-mali - - - reg: Physical base address and length of the GPU registers - - - interrupts: an entry for each entry in interrupt-names. - See ../interrupt-controller/interrupts.txt for details. - - - interrupt-names: - * ppX: Pixel Processor X interrupt (X from 0 to 7) - * ppmmuX: Pixel Processor X MMU interrupt (X from 0 to 7) - * pp: Pixel Processor broadcast interrupt (mali-450 only) - * gp: Geometry Processor interrupt - * gpmmu: Geometry Processor MMU interrupt - - - clocks: an entry for each entry in clock-names - - clock-names: - * bus: bus clock for the GPU - * core: clock driving the GPU itself - -Optional properties: - - interrupt-names and interrupts: - * pmu: Power Management Unit interrupt, if implemented in hardware - - - memory-region: - Memory region to allocate from, as defined in - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt - - - mali-supply: - Phandle to regulator for the Mali device, as defined in - Documentation/devicetree/bindings/regulator/regulator.txt for details. - - - operating-points-v2: - Operating Points for the GPU, as defined in - Documentation/devicetree/bindings/opp/opp.txt - - - power-domains: - A power domain consumer specifier as defined in - Documentation/devicetree/bindings/power/power_domain.txt - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accomodate those differences, you have the option -to specify one more vendor-specific compatible, among: - - - allwinner,sun4i-a10-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun7i-a20-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun50i-a64-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun50i-h5-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - amlogic,meson8-mali and amlogic,meson8b-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - Rockchip variants: - Required properties: - * resets: phandle to the reset line for the GPU - - - stericsson,db8500-mali - Required properties: - * interrupt-names and interrupts: - + combined: combined interrupt of all of the above lines - -Example: - -mali: gpu@1c40000 { - compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; - reg = <0x01c40000 0x10000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", - "gpmmu", - "pp0", - "ppmmu0", - "pp1", - "ppmmu1", - "pmu"; - clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; - clock-names = "bus", "core"; - resets = <&ccu RST_BUS_GPU>; -}; - |