diff options
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt')
-rw-r--r-- | Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt deleted file mode 100644 index d12cc33cca6c..000000000000 --- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt +++ /dev/null @@ -1,46 +0,0 @@ -Broadcom iProc I2C controller - -Required properties: - -- compatible: - Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c" - -- reg: - Define the base and range of the I/O address space that contain the iProc - I2C controller registers - -- clock-frequency: - This is the I2C bus clock. Need to be either 100000 or 400000 - -- #address-cells: - Always 1 (for I2C addresses) - -- #size-cells: - Always 0 - -Optional properties: - -- interrupts: - Should contain the I2C interrupt. For certain revisions of the I2C - controller, I2C interrupt is unwired to the interrupt controller. In such - case, this property should be left unspecified, and driver will fall back - to polling mode - -- brcm,ape-hsls-addr-mask: - Required for "brcm,iproc-nic-i2c". Host view of address mask into the - 'APE' co-processor. Value must be unsigned, 32-bit - -Example: - i2c0: i2c@18008000 { - compatible = "brcm,iproc-i2c"; - reg = <0x18008000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; - clock-frequency = <100000>; - - codec: wm8750@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; - }; - }; |