1 files changed, 0 insertions, 51 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
deleted file mode 100644
index 5ea216ae7084..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
-      "mediatek,mt2712-i2c": for MediaTek MT2712
-      "mediatek,mt6577-i2c": for MediaTek MT6577
-      "mediatek,mt6589-i2c": for MediaTek MT6589
-      "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
-      "mediatek,mt7622-i2c": for MediaTek MT7622
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
-      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
-      "mediatek,mt8173-i2c": for MediaTek MT8173
-      "mediatek,mt8183-i2c": for MediaTek MT8183
-      "mediatek,mt8192-i2c": for MediaTek MT8192
-      "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
-      "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
-  - reg: physical base address of the controller and dma base, length of memory
-    mapped region.
-  - interrupts: interrupt number to the cpu.
-  - clock-div: the fixed value for frequency divider of clock source in i2c
-    module. Each IC may be different.
-  - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
-    one bus has more than two i2c controllers, if enable have-pmic need include
-    "pmic" extra.
-
-Optional properties:
-  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-    is 100000.
-  - mediatek,have-pmic: platform can control i2c form special pmic side.
-    Only mt6589 and mt8135 support this feature.
-  - mediatek,use-push-pull: IO config use push-pull mode.
-  - vbus-supply: phandle to the regulator that provides power to SCL/SDA.
-
-Example:
-
-	i2c0: i2c@1100d000 {
-			compatible = "mediatek,mt6577-i2c";
-			reg = <0x1100d000 0x70>,
-			      <0x11000300 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-			clock-frequency = <400000>;
-			mediatek,have-pmic;
-			clock-div = <16>;
-			clocks = <&i2c0_ck>, <&ap_dma_ck>;
-			clock-names = "main", "dma";
-	};
-