aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/mount-matrix.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/mount-matrix.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/mount-matrix.txt203
1 files changed, 203 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/mount-matrix.txt b/Documentation/devicetree/bindings/iio/mount-matrix.txt
new file mode 100644
index 000000000000..c3344ab509a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/mount-matrix.txt
@@ -0,0 +1,203 @@
+For discussion. Unclear are:
+* is the definition of +/- values practical or counterintuitive?
+* are the definitions unambiguous and easy to follow?
+* are the examples correct?
+* should we have HOWTO engineer a correct matrix for a new device (without comparing to a different one)?
+
+====
+
+
+Mounting matrix
+
+The mounting matrix is a device tree property used to orient any device
+that produce three-dimensional data in relation to the world where it is
+deployed.
+
+The purpose of the mounting matrix is to translate the sensor frame of
+reference into the device frame of reference using a translation matrix as
+defined in linear algebra.
+
+The typical usecase is that where a component has an internal representation
+of the (x,y,z) triplets, such as different registers to read these coordinates,
+and thus implying that the component should be mounted in a certain orientation
+relative to some specific device frame of reference.
+
+For example a device with some kind of screen, where the user is supposed to
+interact with the environment using an accelerometer, gyroscope or magnetometer
+mounted on the same chassis as this screen, will likely take the screen as
+reference to (x,y,z) orientation, with (x,y) corresponding to these axes on the
+screen and (z) being depth, the axis perpendicular to the screen.
+
+For a screen you probably want (x) coordinates to go from negative on the left
+to positive on the right, (y) from negative on the bottom to positive on top
+and (z) depth to be negative under the screen and positive in front of it,
+toward the face of the user.
+
+A sensor can be mounted in any angle along the axes relative to the frame of
+reference. This means that the sensor may be flipped upside-down, left-right,
+or tilted at any angle relative to the frame of reference.
+
+Another frame of reference is how the device with its sensor relates to the
+external world, the environment where the device is deployed. Usually the data
+from the sensor is used to figure out how the device is oriented with respect
+to this world. When using the mounting matrix, the sensor and device orientation
+becomes identical and we can focus on the data as it relates to the surrounding
+world.
+
+Device-to-world examples for some three-dimensional sensor types:
+
+- Accelerometers have their world frame of reference toward the center of
+ gravity, usually to the core of the planet. A reading of the (x,y,z) values
+ from the sensor will give a projection of the gravity vector through the
+ device relative to the center of the planet, i.e. relative to its surface at
+ this point. Up and down in the world relative to the device frame of
+ reference can thus be determined. and users would likely expect a value of
+ 9.81 m/s^2 upwards along the (z) axis, i.e. out of the screen when the device
+ is held with its screen flat on the planets surface and 0 on the other axes,
+ as the gravity vector is projected 1:1 onto the sensors (z)-axis.
+
+ If you tilt the device, the g vector virtually coming out of the display
+ is projected onto the (x,y) plane of the display panel.
+
+ Example:
+
+ ^ z: +g ^ z: > 0
+ ! /!
+ ! x=y=0 / ! x: > 0
+ +--------+ +--------+
+ ! ! ! !
+ +--------+ +--------+
+ ! /
+ ! /
+ v v
+ center of center of
+ gravity gravity
+
+
+ If the device is tilted to the left, you get a positive x value. If you point
+ its top towards surface, you get a negative y axis.
+
+ (---------)
+ ! ! y: -g
+ ! ! ^
+ ! ! !
+ ! !
+ ! ! x: +g <- z: +g -> x: -g
+ ! 1 2 3 !
+ ! 4 5 6 ! !
+ ! 7 8 9 ! v
+ ! * 0 # ! y: +g
+ (---------)
+
+
+- Magnetometers (compasses) have their world frame of reference relative to the
+ geomagnetic field. The system orientation vis-a-vis the world is defined with
+ respect to the local earth geomagnetic reference frame where (y) is in the
+ ground plane and positive towards magnetic North, (x) is in the ground plane,
+ perpendicular to the North axis and positive towards the East and (z) is
+ perpendicular to the ground plane and positive upwards.
+
+
+ ^^^ North: y > 0
+
+ (---------)
+ ! !
+ ! !
+ ! !
+ ! ! >
+ ! ! > North: x > 0
+ ! 1 2 3 ! >
+ ! 4 5 6 !
+ ! 7 8 9 !
+ ! * 0 # !
+ (---------)
+
+ Since the geomagnetic field is not uniform this definition fails if we come
+ closer to the poles.
+
+ Sensors and driver can not and should not take care of this because there
+ are complex calculations and empirical data to be taken care of. We leave
+ this up to user space.
+
+ The definition we take:
+
+ If the device is placed at the equator and the top is pointing north, the
+ display is readable by a person standing upright on the earth surface, this
+ defines a positive y value.
+
+
+- Gyroscopes detects the movement relative the device itself. The angular
+ velocity is defined as orthogonal to the plane of rotation, so if you put the
+ device on a flat surface and spin it around the z axis (such as rotating a
+ device with a screen lying flat on a table), you should get a negative value
+ along the (z) axis if rotated clockwise, and a positive value if rotated
+ counter-clockwise according to the right-hand rule.
+
+
+ (---------) y > 0
+ ! ! v---\
+ ! !
+ ! !
+ ! ! <--\
+ ! ! ! z > 0
+ ! 1 2 3 ! --/
+ ! 4 5 6 !
+ ! 7 8 9 !
+ ! * 0 # !
+ (---------)
+
+
+So unless the sensor is ideally mounted, we need a means to indicate the
+relative orientation of any given sensor of this type with respect to the
+frame of reference.
+
+To achieve this, use the device tree property "mount-matrix" for the sensor.
+
+This supplies a 3x3 rotation matrix in the strict linear algebraic sense,
+to orient the senor axes relative to a desired point of reference. This means
+the resulting values from the sensor, after scaling to proper units, should be
+multiplied by this matrix to give the proper vectors values in three-dimensional
+space, relative to the device or world point of reference.
+
+For more information, consult:
+https://en.wikipedia.org/wiki/Rotation_matrix
+
+The mounting matrix has the layout:
+
+ (mxx, myx, mzx)
+ (mxy, myy, mzy)
+ (mxz, myz, mzz)
+
+Values are intended to be multiplied as:
+
+ x' = mxx * x + myx * y + mzx * z
+ y' = mxy * x + myy * y + mzy * z
+ z' = mxz * x + myz * y + mzz * z
+
+It is represented as an array of strings containing the real values for
+producing the transformation matrix.
+
+Examples:
+
+Identity matrix (nothing happens to the coordinates, which means the device was
+mechanically mounted in an ideal way and we need no transformation):
+
+mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+
+The sensor is mounted 30 degrees (Pi/6 radians) tilted along the X axis, so we
+compensate by performing a -30 degrees rotation around the X axis:
+
+mount-matrix = "1", "0", "0",
+ "0", "0.866", "0.5",
+ "0", "-0.5", "0.866";
+
+The sensor is flipped 180 degrees (Pi radians) around the Z axis, i.e. mounted
+upside-down:
+
+mount-matrix = "0.998", "0.054", "0",
+ "-0.054", "0.998", "0",
+ "0", "0", "1";
+
+???: this does not match "180 degrees" - factors indicate ca. 3 degrees compensation