diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
8 files changed, 400 insertions, 249 deletions
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 9fa6f9795d50..26d770ef3601 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -1,173 +1 @@ -* Common leds properties. - -LED and flash LED devices provide the same basic functionality as current -regulators, but extended with LED and flash LED specific features like -blinking patterns, flash timeout, flash faults and external flash strobe mode. - -Many LED devices expose more than one current output that can be connected -to one or more discrete LED component. Since the arrangement of connections -can influence the way of the LED device initialization, the LED components -have to be tightly coupled with the LED device binding. They are represented -by child nodes of the parent LED device binding. - - -Optional properties for child nodes: -- led-sources : List of device current outputs the LED is connected to. The - outputs are identified by the numbers that must be defined - in the LED device binding documentation. - -- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions - from the header include/dt-bindings/leds/common.h. - If there is no matching LED_FUNCTION available, add a new one. - -- color : Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions - from the header include/dt-bindings/leds/common.h. - If there is no matching LED_COLOR_ID available, add a new one. - -- function-enumerator: Integer to be used when more than one instance - of the same function is needed, differing only with - an ordinal number. - -- label : The label for this LED. If omitted, the label is taken from the node - name (excluding the unit address). It has to uniquely identify - a device, i.e. no other LED class device can be assigned the same - label. This property is deprecated - use 'function' and 'color' - properties instead. function-enumerator has no effect when this - property is present. - -- default-state : The initial state of the LED. Valid values are "on", "off", - and "keep". If the LED is already on or off and the default-state property is - set the to same value, then no glitch should be produced where the LED - momentarily turns off (or on). The "keep" setting will keep the LED at - whatever its current state is, without producing a glitch. The default is - off if this property is not present. - -- linux,default-trigger : This parameter, if present, is a - string defining the trigger assigned to the LED. Current triggers are: - "backlight" - LED will act as a back-light, controlled by the framebuffer - system - "default-on" - LED will turn on (but for leds-gpio see "default-state" - property in Documentation/devicetree/bindings/leds/leds-gpio.txt) - "heartbeat" - LED "double" flashes at a load average based rate - "disk-activity" - LED indicates disk activity - "ide-disk" - LED indicates IDE disk activity (deprecated), - in new implementations use "disk-activity" - "timer" - LED flashes at a fixed, configurable rate - "pattern" - LED alters the brightness for the specified duration with one - software timer (requires "led-pattern" property) - -- led-pattern : Array of integers with default pattern for certain triggers. - Each trigger may parse this property differently: - - one-shot : two numbers specifying delay on and delay off (in ms), - - timer : two numbers specifying delay on and delay off (in ms), - - pattern : the pattern is given by a series of tuples, of - brightness and duration (in ms). The exact format is - described in: - Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - - -- led-max-microamp : Maximum LED supply current in microamperes. This property - can be made mandatory for the board configurations - introducing a risk of hardware damage in case an excessive - current is set. - For flash LED controllers with configurable current this - property is mandatory for the LEDs in the non-flash modes - (e.g. torch or indicator). - -- panic-indicator : This property specifies that the LED should be used, - if at all possible, as a panic indicator. - -- trigger-sources : List of devices which should be used as a source triggering - this LED activity. Some LEDs can be related to a specific - device and should somehow indicate its state. E.g. USB 2.0 - LED may react to device(s) in a USB 2.0 port(s). - Another common example is switch or router with multiple - Ethernet ports each of them having its own LED assigned - (assuming they are not hardwired). In such cases this - property should contain phandle(s) of related source - device(s). - In many cases LED can be related to more than one device - (e.g. one USB LED vs. multiple USB ports). Each source - should be represented by a node in the device tree and be - referenced by a phandle and a set of phandle arguments. A - length of arguments should be specified by the - #trigger-source-cells property in the source node. - -Required properties for flash LED child nodes: -- flash-max-microamp : Maximum flash LED supply current in microamperes. -- flash-max-timeout-us : Maximum timeout in microseconds after which the flash - LED is turned off. - -For controllers that have no configurable current the flash-max-microamp -property can be omitted. -For controllers that have no configurable timeout the flash-max-timeout-us -property can be omitted. - -* Trigger source providers - -Each trigger source should be represented by a device tree node. It may be e.g. -a USB port or an Ethernet device. - -Required properties for trigger source: -- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for - nodes of simple trigger sources (e.g. a specific USB - port). - -* Examples - -#include <dt-bindings/leds/common.h> - -led-controller@0 { - compatible = "gpio-leds"; - - led0 { - function = LED_FUNCTION_STATUS; - linux,default-trigger = "heartbeat"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - - led1 { - function = LED_FUNCTION_USB; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - }; -}; - -led-controller@0 { - compatible = "maxim,max77693-led"; - - led { - function = LED_FUNCTION_FLASH; - color = <LED_COLOR_ID_WHITE>; - led-sources = <0>, <1>; - led-max-microamp = <50000>; - flash-max-microamp = <320000>; - flash-max-timeout-us = <500000>; - }; -}; - -led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; -}; +This file has moved to ./common.yaml. diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml new file mode 100644 index 000000000000..d97d099b87e5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common leds properties + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + LED and flash LED devices provide the same basic functionality as current + regulators, but extended with LED and flash LED specific features like + blinking patterns, flash timeout, flash faults and external flash strobe mode. + + Many LED devices expose more than one current output that can be connected + to one or more discrete LED component. Since the arrangement of connections + can influence the way of the LED device initialization, the LED components + have to be tightly coupled with the LED device binding. They are represented + by child nodes of the parent LED device binding. + +properties: + led-sources: + description: + List of device current outputs the LED is connected to. The outputs are + identified by the numbers that must be defined in the LED device binding + documentation. + $ref: /schemas/types.yaml#definitions/uint32-array + + function: + description: + LED function. Use one of the LED_FUNCTION_* prefixed definitions + from the header include/dt-bindings/leds/common.h. If there is no + matching LED_FUNCTION available, add a new one. + $ref: /schemas/types.yaml#definitions/string + + color: + description: + Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from + the header include/dt-bindings/leds/common.h. If there is no matching + LED_COLOR_ID available, add a new one. + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + minimum: 0 + maximum: 8 + + function-enumerator: + description: + Integer to be used when more than one instance of the same function is + needed, differing only with an ordinal number. + $ref: /schemas/types.yaml#definitions/uint32 + + label: + description: + The label for this LED. If omitted, the label is taken from the node name + (excluding the unit address). It has to uniquely identify a device, i.e. + no other LED class device can be assigned the same label. This property is + deprecated - use 'function' and 'color' properties instead. + function-enumerator has no effect when this property is present. + + default-state: + description: + The initial state of the LED. If the LED is already on or off and the + default-state property is set the to same value, then no glitch should be + produced where the LED momentarily turns off (or on). The "keep" setting + will keep the LED at whatever its current state is, without producing a + glitch. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - on + - off + - keep + default: off + + linux,default-trigger: + description: + This parameter, if present, is a string defining the trigger assigned to + the LED. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + # LED will act as a back-light, controlled by the framebuffer system + - backlight + # LED will turn on (but for leds-gpio see "default-state" property in + # Documentation/devicetree/bindings/leds/leds-gpio.txt) + - default-on + # LED "double" flashes at a load average based rate + - heartbeat + # LED indicates disk activity + - disk-activity + # LED indicates IDE disk activity (deprecated), in new implementations + # use "disk-activity" + - ide-disk + # LED flashes at a fixed, configurable rate + - timer + # LED alters the brightness for the specified duration with one software + # timer (requires "led-pattern" property) + - pattern + + led-pattern: + description: | + Array of integers with default pattern for certain triggers. + + Each trigger may parse this property differently: + - one-shot : two numbers specifying delay on and delay off (in ms), + - timer : two numbers specifying delay on and delay off (in ms), + - pattern : the pattern is given by a series of tuples, of + brightness and duration (in ms). The exact format is + described in: + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + led-max-microamp: + description: + Maximum LED supply current in microamperes. This property can be made + mandatory for the board configurations introducing a risk of hardware + damage in case an excessive current is set. + For flash LED controllers with configurable current this property is + mandatory for the LEDs in the non-flash modes (e.g. torch or indicator). + + panic-indicator: + description: + This property specifies that the LED should be used, if at all possible, + as a panic indicator. + type: boolean + + trigger-sources: + description: | + List of devices which should be used as a source triggering this LED + activity. Some LEDs can be related to a specific device and should somehow + indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0 + port(s). + Another common example is switch or router with multiple Ethernet ports + each of them having its own LED assigned (assuming they are not + hardwired). In such cases this property should contain phandle(s) of + related source device(s). + In many cases LED can be related to more than one device (e.g. one USB LED + vs. multiple USB ports). Each source should be represented by a node in + the device tree and be referenced by a phandle and a set of phandle + arguments. A length of arguments should be specified by the + #trigger-source-cells property in the source node. + $ref: /schemas/types.yaml#definitions/phandle-array + + # Required properties for flash LED child nodes: + flash-max-microamp: + description: + Maximum flash LED supply current in microamperes. Required for flash LED + nodes with configurable current. + + flash-max-timeout-us: + description: + Maximum timeout in microseconds after which the flash LED is turned off. + Required for flash LED nodes with configurable timeout. + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "gpio-leds"; + + led0 { + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + led1 { + function = LED_FUNCTION_USB; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + }; + }; + + led-controller@0 { + compatible = "maxim,max77693-led"; + reg = <0 0x100>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + led-max-microamp = <50000>; + flash-max-microamp = <320000>; + flash-max-timeout-us = <500000>; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt index 21882c8d4b0c..83ff1b4d70a6 100644 --- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt +++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt @@ -8,7 +8,7 @@ Required properties: - compatible: should be "ir-spi-led". Optional properties: - - duty-cycle: 8 bit balue that represents the percentage of one period + - duty-cycle: 8 bit value that represents the percentage of one period in which the signal is active. It can be 50, 60, 70, 75, 80 or 90. - led-active-low: boolean value that specifies whether the output is negated with a NOT gate. diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt deleted file mode 100644 index d21281b63d38..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ /dev/null @@ -1,75 +0,0 @@ -LEDs connected to GPIO lines - -Required properties: -- compatible : should be "gpio-leds". - -Each LED is represented as a sub-node of the gpio-leds device. Each -node's name represents the name of the corresponding LED. - -LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "gpios property" in - Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be - indicated using flags in the GPIO specifier. -- function : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- color : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- label : (optional) - see Documentation/devicetree/bindings/leds/common.txt (deprecated) -- linux,default-trigger : (optional) - see Documentation/devicetree/bindings/leds/common.txt -- default-state: (optional) The initial state of the LED. - see Documentation/devicetree/bindings/leds/common.txt -- retain-state-suspended: (optional) The suspend state can be retained.Such - as charge-led gpio. -- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. - Useful in BMC systems, for example when the BMC is rebooted while the host - remains up. -- panic-indicator : (optional) - see Documentation/devicetree/bindings/leds/common.txt - -Examples: - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -leds { - compatible = "gpio-leds"; - led0 { - gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - function = LED_FUNCTION_DISK; - }; - - led1 { - gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; - /* Keep LED on if BIOS detected hardware fault */ - default-state = "keep"; - function = LED_FUNCTION_FAULT; - }; -}; - -run-control { - compatible = "gpio-leds"; - led0 { - gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - default-state = "off"; - }; - led1 { - gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - default-state = "on"; - }; -}; - -leds { - compatible = "gpio-leds"; - - led0 { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "max8903-charger-charging"; - retain-state-suspended; - function = LED_FUNCTION_CHARGE; - }; -}; diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml new file mode 100644 index 000000000000..0e75b185dd19 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to GPIO lines + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + Each LED is represented as a sub-node of the gpio-leds device. Each + node's name represents the name of the corresponding LED. + +properties: + compatible: + const: gpio-leds + +patternProperties: + # The first form is preferred, but fall back to just 'led' anywhere in the + # node name to at least catch some child nodes. + "(^led-[0-9a-f]$|led)": + type: object + + allOf: + - $ref: common.yaml# + + properties: + gpios: + maxItems: 1 + + retain-state-suspended: + description: + The suspend state can be retained.Such as charge-led gpio. + type: boolean + + retain-state-shutdown: + description: + Retain the state of the LED on shutdown. Useful in BMC systems, for + example when the BMC is rebooted while the host remains up. + type: boolean + + required: + - gpios + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + leds { + compatible = "gpio-leds"; + led-0 { + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + function = LED_FUNCTION_DISK; + }; + + led-1 { + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + function = LED_FUNCTION_FAULT; + }; + }; + + run-control { + compatible = "gpio-leds"; + led-0 { + gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + }; + led-1 { + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt index 4c2d923f8758..501468aa4d38 100644 --- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -18,6 +18,10 @@ Required properties: Optional properties: - enable-gpios : gpio pin to enable/disable the device. - vled-supply : LED supply + - ti,ovp-microvolt: Overvoltage protection in + micro-volt, can be 17000000, 21000000, 25000000 or + 29000000. If ti,ovp-microvolt is not specified it + defaults to 29000000. Required child properties: - reg : 0 - Will enable all LED sync paths @@ -31,6 +35,8 @@ Optional child properties: - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) - linux,default-trigger : see Documentation/devicetree/bindings/leds/common.txt + - led-max-microamp : + see Documentation/devicetree/bindings/leds/common.txt Example: @@ -44,12 +50,14 @@ led-controller@36 { enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + ti,ovp-microvolt = <29000000>; led@0 { reg = <0>; function = LED_FUNCTION_BACKLIGHT; color = <LED_COLOR_ID_WHITE>; linux,default-trigger = "backlight"; + led-max-microamp = <20000>; }; } diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml new file mode 100644 index 000000000000..b50f4bcc98f1 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit LED driver + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD71828 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml. + + The LED controller is represented as a sub-node of the PMIC node on the device + tree. + + The device has two LED outputs referred as GRNLED and AMBLED in data-sheet. + +select: false + +properties: + compatible: + const: rohm,bd71828-leds + +patternProperties: + "^led-[1-2]$": + type: object + description: + Properties for a single LED. + properties: + #allOf: + #- $ref: "common.yaml#" + rohm,led-compatible: + description: LED identification string + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - bd71828-ambled + - bd71828-grnled + function: + description: + Purpose of LED as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/string" + color: + description: + LED colour as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/uint32" + +required: + - compatible diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml new file mode 100644 index 000000000000..0618003e40bd --- /dev/null +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/trigger-source.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trigger source providers + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: + Each trigger source provider should be represented by a device tree node. It + may be e.g. a USB port or an Ethernet device. + +properties: + '#trigger-source-cells': + description: + Number of cells in a source trigger. Typically 0 for nodes of simple + trigger sources (e.g. a specific USB port). + enum: [ 0, 1 ] + +... |