diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
4 files changed, 30 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml index 7a6ec1f8c0f3..73fa59e62181 100644 --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml @@ -4,13 +4,13 @@ $id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Kinetic Technologies KTD253 one-wire backlight +title: Kinetic Technologies KTD253 and KTD259 one-wire backlight maintainers: - Linus Walleij <linus.walleij@linaro.org> description: | - The Kinetic Technologies KTD253 is a white LED backlight that is + The Kinetic Technologies KTD253 and KTD259 are white LED backlights controlled by a single GPIO line. If you just turn on the backlight it goes to maximum backlight then you can set the level of backlight using pulses on the enable wire. This is sometimes referred to as @@ -21,7 +21,10 @@ allOf: properties: compatible: - const: kinetic,ktd253 + items: + - enum: + - kinetic,ktd253 + - kinetic,ktd259 enable-gpios: description: GPIO to use to enable/disable and dim the backlight. diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 47938e372987..d839e75d9788 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - qcom,pm8941-wled + - qcom,pmi8994-wled - qcom,pmi8998-wled - qcom,pm660l-wled - qcom,pm8150l-wled diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index fe7fa25877fd..c7ed2871da06 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: CZ.NIC's Turris Omnia LEDs driver maintainers: - - Marek Behún <marek.behun@nic.cz> + - Marek Behún <kabel@kernel.org> description: This module adds support for the RGB LEDs found on the front panel of the diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml index 32bbf146c01d..f8d7963c3a13 100644 --- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml @@ -14,6 +14,17 @@ properties: compatible: const: intel,lgm-ssoled + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sso + - const: fpid + gpio-controller: true '#gpio-cells': @@ -36,8 +47,15 @@ properties: additionalProperties: false + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: - "^led@[0-23]$": + "^led@[0-2]$": type: object properties: @@ -81,7 +99,7 @@ examples: #include <dt-bindings/leds/common.h> ssogpio: ssogpio@e0d40000 { - compatible = "intel,sso-led"; + compatible = "intel,lgm-ssoled"; reg = <0xE0D40000 0x2E4>; gpio-controller; #gpio-cells = <2>; @@ -103,8 +121,8 @@ examples: led-gpio = <&ssogpio 0 0>; }; - led@23 { - reg = <23>; + led@2 { + reg = <2>; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; led-gpio = <&ssogpio 23 0>; |