diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/tvp5150.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/media/i2c/tvp5150.txt | 43 |
1 files changed, 0 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index daa20e43a8e3..8c0fc1a26bf0 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -12,32 +12,6 @@ Optional Properties: - pdn-gpios: phandle for the GPIO connected to the PDN pin, if any. - reset-gpios: phandle for the GPIO connected to the RESETB pin, if any. -Optional nodes: -- connectors: The input connectors of tvp5150 have to be defined under - a subnode name "connectors" using the following format: - - input-connector-name { - input connector properties - }; - -Each input connector must contain the following properties: - - - label: a name for the connector. - - input: the input connector. - -The possible values for the "input" property are: - 0: Composite0 - 1: Composite1 - 2: S-Video - -and on a tvp5150am1 and tvp5151 there is another: - 4: Signal generator - -The list of valid input connectors are defined in dt-bindings/media/tvp5150.h -header file and can be included by device tree source files. - -Each input connector can be defined only once. - The device node must contain one 'port' child node for its digital output video port, in accordance with the video interface bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt. @@ -62,23 +36,6 @@ Example: pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; - connectors { - composite0 { - label = "Composite0"; - input = <TVP5150_COMPOSITE0>; - }; - - composite1 { - label = "Composite1"; - input = <TVP5150_COMPOSITE1>; - }; - - s-video { - label = "S-Video"; - input = <TVP5150_SVIDEO>; - }; - }; - port { tvp5150_1: endpoint { remote-endpoint = <&ccdc_ep>; |