1 files changed, 0 insertions, 102 deletions
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
deleted file mode 100644
index 386eec06cf08..000000000000
--- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* ROHM BD70528 Power Management Integrated Circuit bindings
-
-BD70528MWV is an ultra-low quiescent current general purpose, single-chip,
-power management IC for battery-powered portable devices. The IC
-integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2
-LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
-clock gate, high-accuracy VREF for use with an external ADC, flexible
-dual-input power path, 10 bit SAR ADC for battery temperature monitor and
-1S battery charger with scalable charge currents.
-
-Required properties:
- - compatible		: Should be "rohm,bd70528"
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: To indicate BD70528 acts as an interrupt controller.
- - #interrupt-cells	: Should be 2. Usage is compliant to the 2 cells
-			  variant of ../interrupt-controller/interrupts.txt
- - gpio-controller	: To indicate BD70528 acts as a GPIO controller.
- - #gpio-cells		: Should be 2. The first cell is the pin number and
-			  the second cell is used to specify flags. See
-			  ../gpio/gpio.txt for more information.
- - #clock-cells		: Should be 0.
- - regulators:		: List of child nodes that specify the regulators.
-			  Please see ../regulator/rohm,bd70528-regulator.txt
-
-Optional properties:
- - clock-output-names	: Should contain name for output clock.
-
-Example:
-/* External oscillator */
-osc: oscillator {
-	compatible = "fixed-clock";
-	#clock-cells = <1>;
-	clock-frequency  = <32768>;
-	clock-output-names = "osc";
-};
-
-pmic: pmic@4b {
-	compatible = "rohm,bd70528";
-	reg = <0x4b>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&osc 0>;
-	#clock-cells = <0>;
-	clock-output-names = "bd70528-32k-out";
-	#gpio-cells = <2>;
-	gpio-controller;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	regulators {
-		buck1: BUCK1 {
-			regulator-name = "buck1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3400000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck2: BUCK2 {
-			regulator-name = "buck2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck3: BUCK3 {
-			regulator-name = "buck3";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <250>;
-		};
-		ldo1: LDO1 {
-			regulator-name = "ldo1";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-		ldo2: LDO2 {
-			regulator-name = "ldo2";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-
-		ldo3: LDO3 {
-			regulator-name = "ldo3";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		led_ldo1: LED_LDO1 {
-			regulator-name = "led_ldo1";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-		led_ldo2: LED_LDO2 {
-			regulator-name = "led_ldo2";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-	};
-};