1 files changed, 0 insertions, 72 deletions
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
deleted file mode 100644
index 30ea27c3936d..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
-
-Required properties:
-
- - compatible		: "samsung,exynos5433-lpass"
- - reg			: should contain the LPASS top SFR region location
-			  and size
- - clock-names		: should contain following required clocks: "sfr0_ctrl"
- - clocks		: should contain clock specifiers of all clocks, which
-			  input names have been specified in clock-names
-			  property, in same order.
- - #address-cells	: should be 1
- - #size-cells		: should be 1
- - ranges		: must be present
-
-Each IP block of the Low Power Audio Subsystem should be specified as
-an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
-UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
-
-Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.yaml
-  ../sound/samsung-i2s.txt
-  ../dma/arm-pl330.txt
-
-
-Example:
-
-audio-subsystem {
-	compatible = "samsung,exynos5433-lpass";
-	reg = <0x11400000 0x100>, <0x11500000 0x08>;
-	clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
-	clock-names = "sfr0_ctrl";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	adma: adma@11420000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x11420000 0x1000>;
-		interrupts = <0 73 0>;
-		clocks = <&cmu_aud CLK_ACLK_DMAC>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	i2s0: i2s0@11440000 {
-		compatible = "samsung,exynos7-i2s";
-		reg = <0x11440000 0x100>;
-		dmas = <&adma 0 &adma 2>;
-		dma-names = "tx", "rx";
-		interrupts = <0 70 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_I2S_BCLK>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	serial_3: serial@11460000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x11460000 0x100>;
-		interrupts = <0 67 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
-			 <&cmu_aud CLK_SCLK_AUD_UART>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart_aud_bus>;
-	};
- };