aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt53
1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
deleted file mode 100644
index ae2074184528..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* BROADCOM BRCMSTB/BMIPS SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-brcmstb driver.
-
-NOTE: The driver disables all UHS speed modes by default and depends
-on Device Tree properties to enable them for SoC/Board combinations
-that support them.
-
-Required properties:
-- compatible: should be one of the following
- - "brcm,bcm7425-sdhci"
- - "brcm,bcm7445-sdhci"
- - "brcm,bcm7216-sdhci"
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
- sdhci@84b0000 {
- sd-uhs-sdr50;
- sd-uhs-ddr50;
- sd-uhs-sdr104;
- sdhci,auto-cmd12;
- compatible = "brcm,bcm7216-sdhci",
- "brcm,bcm7445-sdhci",
- "brcm,sdhci-brcmstb";
- reg = <0x84b0000 0x260 0x84b0300 0x200>;
- reg-names = "host", "cfg";
- interrupts = <0x0 0x26 0x4>;
- interrupt-names = "sdio0_0";
- clocks = <&scmi_clk 245>;
- clock-names = "sw_sdio";
- };
-
- sdhci@84b1000 {
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- supports-cqe;
- non-removable;
- bus-width = <0x8>;
- compatible = "brcm,bcm7216-sdhci",
- "brcm,bcm7445-sdhci",
- "brcm,sdhci-brcmstb";
- reg = <0x84b1000 0x260 0x84b1300 0x200>;
- reg-names = "host", "cfg";
- interrupts = <0x0 0x27 0x4>;
- interrupt-names = "sdio1_0";
- clocks = <&scmi_clk 245>;
- clock-names = "sw_sdio";
- };