diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/altera_tse.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/altera_tse.txt | 113 |
1 files changed, 0 insertions, 113 deletions
diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt deleted file mode 100644 index 0b7d4d3758ea..000000000000 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ /dev/null @@ -1,113 +0,0 @@ -* Altera Triple-Speed Ethernet MAC driver (TSE) - -Required properties: -- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should - be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. - ALTR is supported for legacy device trees, but is deprecated. - altr should be used for all new designs. -- reg: Address and length of the register set for the device. It contains - the information of registers in the same order as described by reg-names -- reg-names: Should contain the reg names - "control_port": MAC configuration space region - "tx_csr": xDMA Tx dispatcher control and status space region - "tx_desc": MSGDMA Tx dispatcher descriptor space region - "rx_csr" : xDMA Rx dispatcher control and status space region - "rx_desc": MSGDMA Rx dispatcher descriptor space region - "rx_resp": MSGDMA Rx dispatcher response space region - "s1": SGDMA descriptor memory -- interrupts: Should contain the TSE interrupts and it's mode. -- interrupt-names: Should contain the interrupt names - "rx_irq": xDMA Rx dispatcher interrupt - "tx_irq": xDMA Tx dispatcher interrupt -- rx-fifo-depth: MAC receive FIFO buffer depth in bytes -- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes -- phy-mode: See ethernet.txt in the same directory. -- phy-handle: See ethernet.txt in the same directory. -- phy-addr: See ethernet.txt in the same directory. A configuration should - include phy-handle or phy-addr. -- altr,has-supplementary-unicast: - If present, TSE supports additional unicast addresses. - Otherwise additional unicast addresses are not supported. -- altr,has-hash-multicast-filter: - If present, TSE supports a hash based multicast filter. - Otherwise, hash-based multicast filtering is not supported. - -- mdio device tree subnode: When the TSE has a phy connected to its local - mdio, there must be device tree subnode with the following - required properties: - - - compatible: Must be "altr,tse-mdio". - - #address-cells: Must be <1>. - - #size-cells: Must be <0>. - - For each phy on the mdio bus, there must be a node with the following - fields: - - - reg: phy id used to communicate to phy. - - device_type: Must be "ethernet-phy". - -The MAC address will be determined using the optional properties defined in -ethernet.txt. - -Example: - - tse_sub_0_eth_tse_0: ethernet@1,00000000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00000000 0x00000400>, - <0x00000001 0x00000460 0x00000020>, - <0x00000001 0x00000480 0x00000020>, - <0x00000001 0x000004A0 0x00000008>, - <0x00000001 0x00000400 0x00000020>, - <0x00000001 0x00000420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 41 4>, <0 40 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy0>; - mdio { - compatible = "altr,tse-mdio"; - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0x0>; - device_type = "ethernet-phy"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - }; - }; - - tse_sub_1_eth_tse_0: ethernet@1,00001000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00001000 0x00000400>, - <0x00000001 0x00001460 0x00000020>, - <0x00000001 0x00001480 0x00000020>, - <0x00000001 0x000014A0 0x00000008>, - <0x00000001 0x00001400 0x00000020>, - <0x00000001 0x00001420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 43 4>, <0 42 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy1>; - }; |