diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/qca8k.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 63 |
1 files changed, 5 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index 48de0ace265d..f3c88371d76c 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -58,33 +58,14 @@ properties: B68 on the QCA832x and B49 on the QCA833x. mdio: - type: object + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false description: Qca8k switch have an internal mdio to access switch port. If this is not present, the legacy mapping is used and the internal mdio access is used. With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - - patternProperties: - "^(ethernet-)?phy@[0-4]$": - type: object - - allOf: - - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" - - properties: - reg: - maxItems: 1 - - required: - - reg - patternProperties: "^(ethernet-)?ports$": type: object @@ -99,40 +80,9 @@ patternProperties: type: object description: Ethernet switch ports - properties: - reg: - description: Port number - - label: - description: - Describes the label associated with this port, which will become - the netdev name - $ref: /schemas/types.yaml#/definitions/string - - link: - description: - Should be a list of phandles to other switch's DSA port. This - port is used as the outgoing port towards the phandle ports. The - full routing information must be given, not just the one hop - routes to neighbouring switches - $ref: /schemas/types.yaml#/definitions/phandle-array - - ethernet: - description: - Should be a phandle to a valid Ethernet device node. This host - device is what the switch port is connected to - $ref: /schemas/types.yaml#/definitions/phandle - - phy-handle: true - - phy-mode: true - - fixed-link: true - - mac-address: true - - sfp: true + $ref: dsa-port.yaml# + properties: qca,sgmii-rxclk-falling-edge: $ref: /schemas/types.yaml#/definitions/flag description: @@ -154,10 +104,7 @@ patternProperties: SGMII on the QCA8337, it is advised to set this unless a communication issue is observed. - required: - - reg - - additionalProperties: false + unevaluatedProperties: false oneOf: - required: |