diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/fsl-enetc.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-enetc.txt | 49 |
1 files changed, 42 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt index c812e25ae90f..b7034ccbc1bd 100644 --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt @@ -11,13 +11,15 @@ Required properties: to parent node bindings. - compatible : Should be "fsl,enetc". -1) The ENETC external port is connected to a MDIO configurable phy: +1. The ENETC external port is connected to a MDIO configurable phy + +1.1. Using the local ENETC Port MDIO interface In this case, the ENETC node should include a "mdio" sub-node that in turn should contain the "ethernet-phy" node describing the external phy. Below properties are required, their bindings -already defined in ethernet.txt or phy.txt, under -Documentation/devicetree/bindings/net/*. +already defined in Documentation/devicetree/bindings/net/ethernet.txt or +Documentation/devicetree/bindings/net/phy.txt. Required: @@ -47,12 +49,45 @@ Example: }; }; -2) The ENETC port is an internal port or has a fixed-link external -connection: +1.2. Using the central MDIO PCIe endpoint device + +In this case, the mdio node should be defined as another PCIe +endpoint node, at the same level with the ENETC port nodes. + +Required properties: + +- reg : Specifies PCIe Device Number and Function + Number of the ENETC endpoint device, according + to parent node bindings. +- compatible : Should be "fsl,enetc-mdio". + +The remaining required mdio bus properties are standard, their bindings +already defined in Documentation/devicetree/bindings/net/mdio.txt. + +Example: + + ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + }; + + mdio@0,3 { + compatible = "fsl,enetc-mdio"; + reg = <0x000300 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; + +2. The ENETC port is an internal port or has a fixed-link external +connection In this case, the ENETC port node defines a fixed link connection, -as specified by "fixed-link.txt", under -Documentation/devicetree/bindings/net/*. +as specified by Documentation/devicetree/bindings/net/fixed-link.txt. Required: |