diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
44 files changed, 273 insertions, 157 deletions
diff --git a/Documentation/devicetree/bindings/net/anarion-gmac.txt b/Documentation/devicetree/bindings/net/anarion-gmac.txt new file mode 100644 index 000000000000..fe678965ae69 --- /dev/null +++ b/Documentation/devicetree/bindings/net/anarion-gmac.txt @@ -0,0 +1,25 @@ +* Adaptrum Anarion ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: + - compatible: Should be "adaptrum,anarion-gmac", "snps,dwmac" + - phy-mode: Should be "rgmii". Other modes are not currently supported. + + +Examples: + + gmac1: ethernet@f2014000 { + compatible = "adaptrum,anarion-gmac", "snps,dwmac"; + reg = <0xf2014000 0x4000>, <0xf2018100 8>; + + interrupt-parent = <&core_intc>; + interrupts = <21>; + interrupt-names = "macirq"; + + clocks = <&core_clk>; + clock-names = "stmmaceth"; + + phy-mode = "rgmii"; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ad16c1f481f7..0bfad656a9ff 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -27,5 +27,4 @@ amac0: ethernet@18022000 { <0x18110000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt new file mode 100644 index 000000000000..4194ff7e6ee6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -0,0 +1,35 @@ +Broadcom Bluetooth Chips +--------------------- + +This documents the binding structure and common properties for serial +attached Broadcom devices. + +Serial attached Broadcom devices shall be a child node of the host UART +device the slave device is attached to. + +Required properties: + + - compatible: should contain one of the following: + * "brcm,bcm43438-bt" + +Optional properties: + + - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - shutdown-gpios: GPIO specifier, used to enable the BT module + - device-wakeup-gpios: GPIO specifier, used to wakeup the controller + - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor + - clocks: clock specifier if external clock provided to the controller + - clock-names: should be "extclk" + + +Example: + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <921600>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index 01fa2d4188d4..9c5e663fa1af 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -29,7 +29,6 @@ Example: Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: &usb_host1_ehci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt index 5a1d8b0c39e9..2d504256b0d8 100644 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -11,9 +11,20 @@ Required properties: - interrupts : property with a value describing the interrupt number -Optional properties: +The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only: - ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the instance number + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: +- power-domains : Should contain a phandle to a PM domain provider node + and an args specifier containing the DCAN device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +- clocks : CAN functional clock phandle. This property is as per the + binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +Optional properties: - syscon-raminit : Handle to system control region that contains the RAMINIT register, register offset to the RAMINIT register and the CAN instance number (0 offset). diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 9e331777c203..78138333ff7a 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -56,7 +56,6 @@ m_can1: can@020e8000 { <&clks IMX6SX_CLK_CANFD>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; - status = "disabled"; }; Board dts: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 0ab8b39d0b30..fd23904ac68e 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; id = <1>; - status = "okay"; ksz9477: ksz9477@0 { compatible = "microchip,ksz9477"; @@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: spi-cpha; spi-cpol; - status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 04f2965a4467..4448d063ddf6 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -27,7 +27,6 @@ Example: I2C managed mode: master: masterdevice@X { - status = "okay"; fixed-link { /* RMII fixed link to LAN9303 */ speed = <100>; @@ -38,7 +37,6 @@ I2C managed mode: switch: switch@a { compatible = "smsc,lan9303-i2c"; reg = <0xa>; - status = "okay"; reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; reset-duration = <200>; @@ -67,7 +65,6 @@ I2C managed mode: MDIO managed mode: master: masterdevice@X { - status = "okay"; phy-handle = <&switch>; mdio { diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 725f3b187886..000000000000 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: should be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: should be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: should be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: should be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- #address-cells: shall be 1 -- #size-cells: shall be 0 -- syscon: A phandle to the syscon of the SoC with one of the following - compatible string: - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - allwinner,sun8i-a83t-system-controller - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) -- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) -Both delay properties need to be a multiple of 100. They control the delay for -external PHY. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" should be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -Required properties of the phy node with the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY - -Example: - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 7da86f22a13b..2974e63ba311 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -1,5 +1,9 @@ The following properties are common to the Ethernet controllers: +NOTE: All 'phy*' properties documented below are Ethernet specific. For the +generic PHY 'phys' property, see +Documentation/devicetree/bindings/phy/phy-bindings.txt. + - local-mac-address: array of 6 bytes, specifies the MAC address that was assigned to the network device; - mac-address: array of 6 bytes, specifies the MAC address that was last used by diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt index c1ce1680246f..72e7aaf7242e 100644 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt @@ -30,6 +30,5 @@ Example: compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; - status = "okay"; use-ncsi; }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index ae4234ca4ee4..bedcfd5a52cd 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -41,7 +41,6 @@ ethernet@70000 { interrupts = <8>; clocks = <&gate_clk 4>; tx-csum-limit = <9800> - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; buffer-manager = <&bm>; diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 9be1059ff03f..3d27c68613a6 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in below example). &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; @@ -70,7 +69,6 @@ below example). Example for USB device: &usb_host1_ohci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt index c1b1d7c3bde1..07b31050dbe5 100644 --- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt +++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt @@ -31,7 +31,6 @@ bm: bm@c8000 { reg = <0xc8000 0xac>; clocks = <&gateclk 13>; internal-mem = <&bm_bppi>; - status = "okay"; pool2,capacity = <4096>; pool1,pkt-size = <512>; }; @@ -45,5 +44,4 @@ bm_bppi: bm-bppi { #address-cells = <1>; #size-cells = <1>; clocks = <&gateclk 13>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 6b4956beff8c..7e2dad08a12e 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -41,6 +41,11 @@ Optional properties (port): - marvell,loopback: port is loopback mode - phy: a phandle to a phy node defining the PHY address (as the reg property, a single integer). +- interrupt-names: if more than a single interrupt for rx is given, must + be the name associated to the interrupts listed. Valid + names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3", + "rx-shared", "link". +- marvell,system-controller: a phandle to the system controller. Example for marvell,armada-375-pp2: @@ -52,12 +57,10 @@ ethernet@f0000 { <0xc5000 0x100>; clocks = <&gateclk 3>, <&gateclk 19>; clock-names = "pp_clk", "gop_clk"; - status = "okay"; eth0: eth0@c4000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; - status = "okay"; phy = <&phy0>; phy-mode = "gmii"; }; @@ -65,7 +68,6 @@ ethernet@f0000 { eth1: eth1@c5000 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; - status = "okay"; phy = <&phy3>; phy-mode = "gmii"; }; @@ -80,19 +82,37 @@ cpm_ethernet: ethernet@0 { clock-names = "pp_clk", "gop_clk", "gp_clk"; eth0: eth0 { - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <0>; gop-port-id = <0>; }; eth1: eth1 { - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <1>; gop-port-id = <2>; }; eth2: eth2 { - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared"; port-id = <2>; gop-port-id = <3>; }; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index c7194e87d5f4..214eaa9a6683 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -7,24 +7,32 @@ have dual GMAC each represented by a child node.. * Ethernet controller node Required properties: -- compatible: Should be "mediatek,mt2701-eth" +- compatible: Should be + "mediatek,mt2701-eth": for MT2701 SoC + "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC + "mediatek,mt7622-eth": for MT7622 SoC - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" + "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC + "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain a phandle to the ethsys reset signal -- reset-names: Should contain the reset signal name "eth" +- resets: Should contain phandles to the ethsys reset signals +- reset-names: Should contain the names of reset signal listed in the resets + property + These are "fe", "gmac" and "ppe" - mediatek,ethsys: phandle to the syscon node that handles the port setup +- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup + which is required for those SoCs equipped with SGMII such as MT7622 SoC. - mediatek,pctl: phandle to the syscon node that handles the ports slew rate and driver current Optional properties: - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - * Ethernet MAC node Required properties: diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index 0703ad3f3c1e..354dd9896bb5 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -66,5 +66,4 @@ Example for GXBB: <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index c35b5b428a7f..42a248301615 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -69,7 +69,6 @@ Examples: }; }; ethernet@70000 { - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt index 1dc3bc75539d..44dff53d4dda 100644 --- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq): compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>; - status = "okay"; enc28j60: ethernet@0 { compatible = "microchip,enc28j60"; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 76df9173825a..c9b35251bb20 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -25,7 +25,6 @@ Optional I2C-based chip specific properties: Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { - status = "okay"; nfcmrvluart: nfcmrvluart@5 { compatible = "marvell,nfc-uart"; @@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): &i2c1 { - status = "okay"; clock-frequency = <400000>; nfcmrvli2c0: i2c@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index 5b6cd9b3f628..92486733df71 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): &i2c2 { - status = "okay"; npc100: npc100@29 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt index 1aea822d4530..122460e42e3c 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt @@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2): &i2c2 { - status = "okay"; pn532: pn532@24 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index dab69f36167c..538a86f7b2b0 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): &i2c2 { - status = "okay"; pn544: pn544@28 { diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt index fb1e75facf1b..ed5b3eaadb39 100644 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -12,7 +12,6 @@ Required properties: Example: &hsi2c_4 { - status = "okay"; s3fwrn5@27 { compatible = "samsung,s3fwrn5-i2c"; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index 263732e8879f..b46d473be425 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): &i2c2 { - status = "okay"; st21nfcb: st21nfcb@8 { diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt index 711ca85a363d..54ce8e7ac681 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): &mcspi4 { - status = "okay"; st21nfcb: st21nfcb@0 { diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt index 7bb2e213d6f9..5ee9440fa9ad 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): &i2c2 { - status = "okay"; st21nfca: st21nfca@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt index ea3178bc9ddd..08a202e00d47 100644 --- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt +++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt @@ -35,12 +35,10 @@ spi@9840000 { #address-cells = <1>; #size-cells = <0>; cs-gpios = <&pio0 4>; - status = "okay"; st95hf@0{ reg = <0>; compatible = "st,st95hf"; - status = "okay"; spi-max-frequency = <1000000>; enable-gpio = <&pio4 0>; interrupt-parent = <&pio0>; diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 60c833d62181..5ca9362ef127 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -23,7 +23,6 @@ Optional SoC Specific Properties: Example (for ARM-based BeagleBone with TRF7970A on SPI1): &spi1 { - status = "okay"; nfc@0 { compatible = "ti,trf7970a"; @@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): irq-status-read-quirk; en2-rf-quirk; clock-frequency = <27120000>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt index df0534e2eda1..d7117a22fd87 100644 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt @@ -35,5 +35,4 @@ etha: ethernet@40400000 { /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index b55857696fc3..77d0b2a61ffa 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -2,11 +2,7 @@ PHY nodes Required properties: - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : interrupt specifier for the sole interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer @@ -52,11 +48,16 @@ Optional Properties: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. +- phy-is-integrated: If set, indicates that the PHY is integrated into the same + physical package as the Ethernet MAC. If needed, muxers should be configured + to ensure the integrated PHY is used. The absence of this property indicates + the muxers should be configured so that the external PHY is used. + Example: ethernet-phy@0 { compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <40000>; - interrupts = <35 1>; + interrupt-parent = <&PIC>; + interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 6d9efb2eb9a5..3987846b3fd3 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -41,7 +41,6 @@ ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; - status = "okay"; qca7000: ethernet@0 { compatible = "qca,qca7000"; @@ -78,7 +77,6 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; pinctrl-names = "default"; pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; qca7000: ethernet { compatible = "qca,qca7000"; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index b519503be51a..16723535e1aa 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -4,19 +4,25 @@ This file provides information on what the device node for the Ethernet AVB interface contains. Required properties: -- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC. - "renesas,etheravb-r8a7791" if the device is a part of R8A7791 SoC. - "renesas,etheravb-r8a7792" if the device is a part of R8A7792 SoC. - "renesas,etheravb-r8a7793" if the device is a part of R8A7793 SoC. - "renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC. - "renesas,etheravb-r8a7796" if the device is a part of R8A7796 SoC. - "renesas,etheravb-rcar-gen2" for generic R-Car Gen 2 compatible interface. - "renesas,etheravb-rcar-gen3" for generic R-Car Gen 3 compatible interface. +- compatible: Must contain one or more of the following: + - "renesas,etheravb-r8a7743" for the R8A7743 SoC. + - "renesas,etheravb-r8a7745" for the R8A7745 SoC. + - "renesas,etheravb-r8a7790" for the R8A7790 SoC. + - "renesas,etheravb-r8a7791" for the R8A7791 SoC. + - "renesas,etheravb-r8a7792" for the R8A7792 SoC. + - "renesas,etheravb-r8a7793" for the R8A7793 SoC. + - "renesas,etheravb-r8a7794" for the R8A7794 SoC. + - "renesas,etheravb-rcar-gen2" as a fallback for the above + R-Car Gen2 and RZ/G1 devices. - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. + - "renesas,etheravb-r8a7795" for the R8A7795 SoC. + - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-rcar-gen3" as a fallback for the above + R-Car Gen3 devices. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed by + the generic version. - reg: offset and length of (1) the register block and (2) the stream buffer. - interrupts: A list of interrupt-specifiers, one for each entry in diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 8f427550720a..6af8eed1adeb 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -10,6 +10,7 @@ Required properties: "rockchip,rk3366-gmac": found on RK3366 SoCs "rockchip,rk3368-gmac": found on RK3368 SoCs "rockchip,rk3399-gmac": found on RK3399 SoCs + "rockchip,rv1108-gmac": found on RV1108 SoCs - reg: addresses and length of the register sets for the device. - interrupts: Should contain the GMAC interrupts. - interrupt-names: Should contain the interrupt names "macirq". @@ -70,5 +71,4 @@ gmac: ethernet@ff290000 { tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt new file mode 100644 index 000000000000..60e970ce10ee --- /dev/null +++ b/Documentation/devicetree/bindings/net/sff,sfp.txt @@ -0,0 +1,76 @@ +Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP) +Transceiver + +Required properties: + +- compatible : must be "sff,sfp" + +Optional Properties: + +- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial + interface + +- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) + module presence input gpio signal, active (module absent) high + +- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal + Indication input gpio signal, active (signal lost) high + +- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter + Fault input gpio signal, active (fault condition) high + +- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable + output gpio signal, active (Tx disable) high + +- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate + Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate + +- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate + Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high: + high Tx rate + +Example #1: Direct serdes to SFP connection + +sfp_eth3: sfp-eth3 { + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>; + tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>; +}; + +&cps_emac3 { + phy-names = "comphy"; + phys = <&cps_comphy5 0>; + sfp = <&sfp_eth3>; +}; + +Example #2: Serdes to PHY to SFP connection + +sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cps_sfpp0_pins>; + tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; +}; + +p0_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + pinctrl-names = "default"; + pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>; + reg = <0>; + interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>; + sfp = <&sfp_eth0>; +}; + +&cpm_eth0 { + phy = <&p0_phy>; + phy-mode = "10gbase-kr"; +}; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 974edd5c85cc..8b7c719b0bb9 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board. pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethernetphy0: ethernet-phy@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 2e68a3cd8513..b30d04b54ee9 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 { gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; - status = "disabled"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index d05c1e1fd9b6..062c5174add3 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -34,7 +34,6 @@ Example: ethernet0: dwmac@9630000 { device_type = "network"; - status = "disabled"; compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; reg = <0x9630000 0x8000>; reg-names = "stmmaceth"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index c35afb7e956a..489dbcb66c5a 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -18,7 +18,6 @@ Example: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - status = "disabled"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; interrupts = <0 61 0>, <0 62 0>; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 590f622188de..b2bd4704f859 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -29,7 +29,6 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; - status = "okay"; brcmf: wifi@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt index 19331bb4ff6e..6830c4786f8a 100644 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt @@ -21,7 +21,6 @@ Example: mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; - status = "okay"; esp8089: sdio_wifi@1 { compatible = "esp,esp8089"; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 0854451ff91d..59de8646862d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured so that firmware can wakeup host using this device side pin. &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt index 7b2cbb14113e..f42f6b0f1bc7 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added. Example: &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt new file mode 100644 index 000000000000..38f9ec076743 --- /dev/null +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -0,0 +1,55 @@ +XILINX AXI ETHERNET Device Tree Bindings +-------------------------------------------------------- + +Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core +provides connectivity to an external ethernet PHY supporting different +interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two +segments of memory for buffering TX and RX, as well as the capability of +offloading TX/RX checksum calculation off the processor. + +Management configuration is done through the AXI interface, while payload is +sent and received through means of an AXI DMA controller. This driver +includes the DMA driver code, so this driver is incompatible with AXI DMA +driver. + +For more details about mdio please refer phy.txt file in the same directory. + +Required properties: +- compatible : Must be one of "xlnx,axi-ethernet-1.00.a", + "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" +- reg : Address and length of the IO space. +- interrupts : Should be a list of two interrupt, TX and RX. +- phy-handle : Should point to the external phy device. + See ethernet.txt file in the same directory. +- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware + +Optional properties: +- phy-mode : See ethernet.txt +- xlnx,phy-type : Deprecated, do not use, but still accepted in preference + to phy-mode. +- xlnx,txcsum : 0 or empty for disabling TX checksum offload, + 1 to enable partial TX checksum offload, + 2 to enable full TX checksum offload +- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload + +Example: + axi_ethernet_eth: ethernet@40c00000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + device_type = "network"; + interrupt-parent = <µblaze_0_axi_intc>; + interrupts = <2 0>; + phy-mode = "mii"; + reg = <0x40c00000 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy0>; + axi_ethernetlite_0_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: phy@0 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; |