aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/hisilicon-pcie.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/hisilicon-pcie.txt42
1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 0dcb87d6554f..d6796ef54ea1 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -41,45 +41,3 @@ Hip05 Example (note that Hip06 is the same except compatible):
0x0 0 0 3 &mbigen_pcie 3 12
0x0 0 0 4 &mbigen_pcie 4 13>;
};
-
-HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
-
-Some BIOSes place the host controller in a mode where it is ECAM
-compliant for all devices other than the root complex. In such cases,
-the host controller should be described as below.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible : Must be "hisilicon,hip06-pcie-ecam", or
- "hisilicon,hip07-pcie-ecam"
-
-- reg : Two entries: First the ECAM configuration space for any
- other bus underneath the root bus. Second, the base
- and size of the HiSilicon host bridge registers include
- the RC's own config space.
-
-Example:
- pcie0: pcie@a0090000 {
- compatible = "hisilicon,hip06-pcie-ecam";
- reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */
- <0 0xa0090000 0 0x10000>; /* host bridge registers */
- bus-range = <0 31>;
- msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
- msi-map-mask = <0xffff>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
- 0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
- 0x0 0 0 2 &mbigen_pcie0 650 4
- 0x0 0 0 3 &mbigen_pcie0 650 4
- 0x0 0 0 4 &mbigen_pcie0 650 4>;
- };