diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/qcom,pcie.yaml | 825 |
1 files changed, 825 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml new file mode 100644 index 000000000000..54f07852d279 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -0,0 +1,825 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI express root complex + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Stanimir Varbanov <svarbanov@mm-sol.com> + +description: | + Qualcomm PCIe root complex controller is based on the Synopsys DesignWare + PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-ipq6018 + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + minItems: 4 + maxItems: 5 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + # Common definitions for clocks, clock-names and reset. + # Platform constraints are described later. + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + resets: + minItems: 1 + maxItems: 12 + + resets-names: + minItems: 1 + maxItems: 12 + + vdda-supply: + description: A phandle to the core analog power supply + + vdda_phy-supply: + description: A phandle to the core analog power supply for PHY + + vdda_refclk-supply: + description: A phandle to the core analog power supply for IC which generates reference clock + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-sdm845 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + then: + properties: + clocks: + minItems: 3 + maxItems: 5 + clock-names: + minItems: 3 + items: + - const: core # Clocks the pcie hw block + - const: iface # Configuration AHB clock + - const: phy # Clocks the pcie PHY block + - const: aux # Clocks the pcie AUX block, not on apq8064 + - const: ref # Clocks the pcie ref block, not on apq8064 + resets: + minItems: 5 + maxItems: 6 + reset-names: + minItems: 5 + items: + - const: axi # AXI reset + - const: ahb # AHB reset + - const: por # POR reset + - const: pci # PCI reset + - const: phy # PHY reset + - const: ext # EXT reset, not on apq8064 + required: + - vdda-supply + - vdda_phy-supply + - vdda_refclk-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # Configuration AHB clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + - const: aux # Auxiliary (AUX) clock + resets: + maxItems: 1 + reset-names: + items: + - const: core # Core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq4019 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: aux # Auxiliary (AUX) clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + resets: + minItems: 12 + maxItems: 12 + reset-names: + items: + - const: axi_m # AXI master reset + - const: axi_s # AXI slave reset + - const: pipe # PIPE reset + - const: axi_m_vmid # VMID reset + - const: axi_s_xpu # XPU reset + - const: parf # PARF reset + - const: phy # PHY reset + - const: axi_m_sticky # AXI sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + - const: phy_ahb # PHY AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + oneOf: + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: aux # Auxiliary (AUX) clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: cfg # Configuration clock + - const: aux # Auxiliary (AUX) clock + properties: + clocks: + minItems: 5 + maxItems: 5 + resets: false + reset-names: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8074 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: ahb # AHB clock + - const: aux # Auxiliary clock + resets: + minItems: 7 + maxItems: 7 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: axi_bridge # AXI bridge clock + - const: rchng + resets: + minItems: 8 + maxItems: 8 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: axi_s_sticky # AXI Slave Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-qcs404 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # AHB clock + - const: aux # Auxiliary clock + - const: master_bus # AXI Master clock + - const: slave_bus # AXI Slave clock + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdm845 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8180x + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie0 + then: + properties: + clocks: + minItems: 12 + maxItems: 12 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie1 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sc8280xp + then: + properties: + clocks: + minItems: 8 + maxItems: 9 + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr_4 # NoC aggregate 4 clock + - const: noc_aggr_south_sf # NoC aggregate South SF clock + - const: cnoc_qx # Configuration NoC QX clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + required: + - power-domains + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + required: + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + then: + oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8280xp + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000>, + <0x1b502000 0x80>, + <0x1b600000 0x100>, + <0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, + <0x82000000 0 0 0x08000000 0 0x07e00000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 41>, + <&gcc 43>, + <&gcc 44>, + <&gcc 42>, + <&gcc 248>; + clock-names = "core", "iface", "phy", "aux", "ref"; + resets = <&gcc 27>, + <&gcc 26>, + <&gcc 25>, + <&gcc 24>, + <&gcc 23>, + <&gcc 22>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + pcie@fc520000 { + compatible = "qcom,pcie-apq8084"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000>, + <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 324>, + <&gcc 325>, + <&gcc 327>, + <&gcc 323>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc 81>; + reset-names = "core"; + power-domains = <&gcc 1>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; +... |