1 files changed, 0 insertions, 130 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
deleted file mode 100644
index e47ebf934daf..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
-  Low Power Island (LPI) TLMM block
-
-maintainers:
-  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  LPASS LPI IP on most Qualcomm SoCs
-
-properties:
-  compatible:
-    const: qcom,sm8250-lpass-lpi-pinctrl
-
-  reg:
-    minItems: 2
-    maxItems: 2
-
-  clocks:
-    items:
-      - description: LPASS Core voting clock
-      - description: LPASS Audio voting clock
-
-  clock-names:
-    items:
-      - const: core
-      - const: audio
-
-  gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-#PIN CONFIGURATION NODES
-patternProperties:
-  '-pins$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
-
-    properties:
-      pins:
-        description:
-          List of gpio pins affected by the properties specified in this
-          subnode.
-        items:
-          oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9])$"
-        minItems: 1
-        maxItems: 14
-
-      function:
-        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
-                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
-                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
-                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
-                dmic3_data, i2s2_data ]
-        description:
-          Specify the alternative function to be configured for the specified
-          pins.
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-
-      bias-pull-up: true
-
-      bias-disable: true
-
-      output-high: true
-
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/sound/qcom,q6afe.h>
-    lpi_tlmm: pinctrl@33c0000 {
-        compatible = "qcom,sm8250-lpass-lpi-pinctrl";
-        reg = <0x33c0000 0x20000>,
-              <0x3550000 0x10000>;
-        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-        clock-names = "core", "audio";
-        gpio-controller;
-        #gpio-cells = <2>;
-        gpio-ranges = <&lpi_tlmm 0 0 14>;
-    };