1 files changed, 70 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
new file mode 100644
index 000000000000..5a628333d52f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
@@ -0,0 +1,70 @@
+* Spreadtrum SC9860 Pin Controller
+
+Please refer to sprd,pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: Must be "sprd,sc9860-pinctrl".
+- reg: The register address of pin controller device.
+- pins : An array of strings, each string containing the name of a pin.
+
+Optional properties:
+- function: A string containing the name of the function, values must be
+  one of: "func1", "func2", "func3" and "func4".
+- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
+  12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor
+  is 20K and 4700 for pull-up resistor is 4.7K.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Choose the pin sleep mode, and supported values are:
+  AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP.
+
+Pin sleep mode definition:
+enum pin_sleep_mode {
+	AP_SLEEP = BIT(0),
+	PUBCP_SLEEP = BIT(1),
+	TGLDSP_SLEEP = BIT(2),
+	AGDSP_SLEEP = BIT(3),
+};
+
+Example:
+pin_controller: pinctrl@402a0000 {
+	compatible = "sprd,sc9860-pinctrl";
+	reg = <0x402a0000 0x10000>;
+
+	grp1: sd0 {
+		pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE";
+		sprd,control = <0x1>;
+	};
+
+	grp2: rfctl_33 {
+		pins = "SC9860_RFCTL33";
+		function = "func2";
+		sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>;
+		grp2_sleep_mode: rfctl_33_sleep {
+			pins = "SC9860_RFCTL33";
+			sleep-hardware-state;
+			output-low;
+		}
+	};
+
+	grp3: rfctl_misc_20 {
+		pins = "SC9860_RFCTL20_MISC";
+		drive-strength = <10>;
+		bias-pull-up = <4700>;
+		grp3_sleep_mode: rfctl_misc_sleep {
+			pins = "SC9860_RFCTL20_MISC";
+			sleep-hardware-state;
+			bias-pull-up;
+		}
+	};
+};