diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power/fsl,imx-gpc.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/power/fsl,imx-gpc.txt | 85 |
1 files changed, 57 insertions, 28 deletions
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index 65cc0345747d..6c1498958d48 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -1,22 +1,42 @@ Freescale i.MX General Power Controller ======================================= -The i.MX6Q General Power Control (GPC) block contains DVFS load tracking -counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power -domains. +The i.MX6 General Power Control (GPC) block contains DVFS load tracking +counters and Power Gating Control (PGC). Required properties: -- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc" +- compatible: Should be one of the following: + - fsl,imx6q-gpc + - fsl,imx6qp-gpc + - fsl,imx6sl-gpc - reg: should be register base and length as documented in the datasheet -- interrupts: Should contain GPC interrupt request 1 -- pu-supply: Link to the LDO regulator powering the PU power domain -- clocks: Clock phandles to devices in the PU power domain that need - to be enabled during domain power-up for reset propagation. -- #power-domain-cells: Should be 1, see below: +- interrupts: Should contain one interrupt specifier for the GPC interrupt +- clocks: Must contain an entry for each entry in clock-names. + See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - ipg -The gpc node is a power-controller as documented by the generic power domain -bindings in Documentation/devicetree/bindings/power/power_domain.txt. +The power domains are generic power domain providers as documented in +Documentation/devicetree/bindings/power/power_domain.txt. They are described as +subnodes of the power gating controller 'pgc' node of the GPC and should +contain the following: + +Required properties: +- reg: Must contain the DOMAIN_INDEX of this power domain + The following DOMAIN_INDEX values are valid for i.MX6Q: + ARM_DOMAIN 0 + PU_DOMAIN 1 + The following additional DOMAIN_INDEX value is valid for i.MX6SL: + DISPLAY_DOMAIN 2 + +- #power-domain-cells: Should be 0 + +Optional properties: +- clocks: a number of phandles to clocks that need to be enabled during domain + power-up sequencing to ensure reset propagation into devices located inside + this power domain +- power-supply: a phandle to the regulator powering this domain Example: @@ -25,14 +45,30 @@ Example: reg = <0x020dc000 0x4000>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; - pu-supply = <®_pu>; - clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>, - <&clks IMX6QDL_CLK_GPU2D_CORE>, - <&clks IMX6QDL_CLK_GPU2D_AXI>, - <&clks IMX6QDL_CLK_OPENVG_AXI>, - <&clks IMX6QDL_CLK_VPU_AXI>; - #power-domain-cells = <1>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; }; @@ -40,20 +76,13 @@ Specifying power domain for IP modules ====================================== IP cores belonging to a power domain should contain a 'power-domains' property -that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying -the power domain the device belongs to. +that is a phandle pointing to the power domain the device belongs to. Example of a device that is part of the PU power domain: vpu: vpu@02040000 { reg = <0x02040000 0x3c000>; /* ... */ - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; /* ... */ }; - -The following DOMAIN_INDEX values are valid for i.MX6Q: -ARM_DOMAIN 0 -PU_DOMAIN 1 -The following additional DOMAIN_INDEX value is valid for i.MX6SL: -DISPLAY_DOMAIN 2 |