1 files changed, 59 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
new file mode 100644
index 000000000000..45d66c775115
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled power off
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  System power off support via a GPIO line. When a shutdown is
+  executed the operating system is expected to switch the GPIO
+  from inactive to active. After a delay (active-delay-ms) it
+  is expected to be switched back to inactive. After another
+  delay (inactive-delay-ms) it is configured as active again.
+  Finally the operating system assumes the power off failed if
+  the system is still running after waiting some time (timeout-ms).
+
+properties:
+  compatible:
+    const: gpio-poweroff
+
+  gpios:
+    maxItems: 1
+
+  input:
+    type: boolean
+    description: >
+      Initially configure the GPIO line as an input. Only reconfigure
+      it to an output when the power-off sequence is initiated. If this optional
+      property is not specified, the GPIO is initialized as an output in its inactive state.
+
+  active-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio active
+
+  inactive-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio inactive
+
+  timeout-ms:
+    default: 3000
+    description: Time to wait before assuming the power off sequence failed.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-poweroff {
+        compatible = "gpio-poweroff";
+        gpios = <&gpio 4 0>;
+        timeout-ms = <3000>;
+    };