1 files changed, 0 insertions, 76 deletions
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
deleted file mode 100644
index 12bbe9f22560..000000000000
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Synopsys DesignWare ABP UART
-
-Required properties:
-- compatible : "snps,dw-apb-uart"
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-
-Clock handling:
-The clock rate of the input clock needs to be supplied by one of
-- clock-frequency : the input clock frequency for the UART.
-- clocks : phandle to the input clock
-
-The supplying peripheral clock can also be handled, needing a second property
-- clock-names: tuple listing input clock names.
-	Required elements: "baudclk", "apb_pclk"
-
-Optional properties:
-- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE
-  configuration parameter. Define this if your UART does not implement the busy
-  functionality.
-- resets : phandle to the parent reset controller.
-- reg-shift : quantity to shift the register offsets by.  If this property is
-  not present then the register offsets are not shifted.
-- reg-io-width : the size (in bytes) of the IO accesses that should be
-  performed on the device.  If this property is not present then single byte
-  accesses are used.
-- dcd-override : Override the DCD modem status signal. This signal will always
-  be reported as active instead of being obtained from the modem status
-  register. Define this if your serial port does not use this pin.
-- dsr-override : Override the DTS modem status signal. This signal will always
-  be reported as active instead of being obtained from the modem status
-  register. Define this if your serial port does not use this pin.
-- cts-override : Override the CTS modem status signal. This signal will always
-  be reported as active instead of being obtained from the modem status
-  register. Define this if your serial port does not use this pin.
-- ri-override : Override the RI modem status signal. This signal will always be
-  reported as inactive instead of being obtained from the modem status register.
-  Define this if your serial port does not use this pin.
-
-Example:
-
-	uart@80230000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x80230000 0x100>;
-		clock-frequency = <3686400>;
-		interrupts = <10>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		dcd-override;
-		dsr-override;
-		cts-override;
-		ri-override;
-	};
-
-Example with one clock:
-
-	uart@80230000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x80230000 0x100>;
-		clocks = <&baudclk>;
-		interrupts = <10>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-Example with two clocks:
-
-	uart@80230000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x80230000 0x100>;
-		clocks = <&baudclk>, <&apb_pclk>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <10>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};