diff options
Diffstat (limited to 'Documentation/devicetree/bindings/serial/st,stm32-usart.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/serial/st,stm32-usart.txt | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 9d3efed55deb..8620f7fcbd50 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -13,12 +13,18 @@ Required properties: - clocks: The input clock of the USART instance Optional properties: +- resets: Must contain the phandle to the reset controller. - pinctrl: The reference on the pins configuration - st,hw-flow-ctrl: bool flag to enable hardware flow control. - rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt. - dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt - dma-names: "rx" and/or "tx" +- wakeup-source: bool flag to indicate this device has wakeup capabilities +- interrupt-names, if optional wake-up interrupt is used, should be: + - "event": the name for the interrupt line of the USART instance + - "wakeup" the name for the optional wake-up interrupt + Examples: usart4: serial@40004c00 { |