diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt | 21 |
1 files changed, 20 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt index 349f79fd7076..626e1afa64a6 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt @@ -13,8 +13,17 @@ Required properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - gpio-controller : Marks the port as GPIO controller. +Optional properties: +- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C + on CPM1), this item tells which ports have an associated interrupt (ports are + listed in the same order as in PCINT register) +- interrupts : This property provides the list of interrupt for each GPIO having + one as described by the fsl,cpm1-gpio-irq-mask property. There should be as + many interrupts as number of ones in the mask property. The first interrupt in + the list corresponds to the most significant bit of the mask. +- interrupt-parent : Parent for the above interrupt property. -Example of three SOC GPIO banks defined as gpio-controller nodes: +Example of four SOC GPIO banks defined as gpio-controller nodes: CPM1_PIO_A: gpio-controller@950 { #gpio-cells = <2>; @@ -30,6 +39,16 @@ Example of three SOC GPIO banks defined as gpio-controller nodes: gpio-controller; }; + CPM1_PIO_C: gpio-controller@960 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-c"; + reg = <0x960 0x10>; + fsl,cpm1-gpio-irq-mask = <0x0fff>; + interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; + interrupt-parent = <&CPM_PIC>; + gpio-controller; + }; + CPM1_PIO_E: gpio-controller@ac8 { #gpio-cells = <2>; compatible = "fsl,cpm1-pario-bank-e"; |