diff options
Diffstat (limited to '')
-rw-r--r-- | Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 102 |
1 files changed, 4 insertions, 98 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index a776cd37c297..2bf5293fc995 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -7,8 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: GENI Serial Engine QUP Wrapper Controller maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> description: | Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper @@ -64,116 +63,23 @@ required: - ranges patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: Common properties for GENI Serial Engine based I2C, SPI and - UART controller. - - properties: - reg: - description: GENI Serial Engine register address and length. - maxItems: 1 - - clock-names: - const: se - - clocks: - description: Serial engine core clock needed by the device. - maxItems: 1 - - interconnects: - minItems: 2 - maxItems: 3 - - interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory - - required: - - reg - - clock-names - - clocks - "spi@[0-9a-f]+$": type: object description: GENI serial engine based SPI controller. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - $ref: /spi/spi-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-spi - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# "i2c@[0-9a-f]+$": type: object description: GENI serial engine based I2C controller. - $ref: /schemas/i2c/i2c-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-i2c - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - clock-frequency: - description: Desired I2C bus clock frequency in Hz. - default: 100000 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# "serial@[0-9a-f]+$": type: object description: GENI Serial Engine based UART Controller. - $ref: /schemas/serial.yaml# - - properties: - compatible: - enum: - - qcom,geni-uart - - qcom,geni-debug-uart - - interrupts: - minItems: 1 - items: - - description: UART core irq - - description: Wakeup irq (RX GPIO) - - required: - - compatible - - interrupts + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# additionalProperties: false |