aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/soundwire/qcom,sdw.txt')
-rw-r--r--Documentation/devicetree/bindings/soundwire/qcom,sdw.txt167
1 files changed, 167 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
new file mode 100644
index 000000000000..436547f3b155
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -0,0 +1,167 @@
+Qualcomm SoundWire Controller Bindings
+
+
+This binding describes the Qualcomm SoundWire Controller along with its
+board specific bus parameters.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
+ Example:
+ "qcom,soundwire-v1.3.0"
+ "qcom,soundwire-v1.5.0"
+ "qcom,soundwire-v1.6.0"
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of SoundWire controller
+ address space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the SoundWire Controller IRQ
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: should be "iface" for SoundWire Controller interface clock
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the SoundWire Controller interface clock
+
+- #sound-dai-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1 for digital audio interfaces on the controller.
+
+- qcom,dout-ports:
+ Usage: required
+ Value type: <u32>
+ Definition: must be count of data out ports
+
+- qcom,din-ports:
+ Usage: required
+ Value type: <u32>
+ Definition: must be count of data in ports
+
+- qcom,ports-offset1:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify payload transport window offset1 of each
+ data port. Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-offset2:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify payload transport window offset2 of each
+ data port. Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-sinterval-low:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should be sample interval low of each data port.
+ Out ports followed by In ports. Used for Sample Interval
+ calculation.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-word-length:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be size of payload channel sample.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-pack-mode:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be 0 or 1 to indicate the block packing mode.
+ 0 to indicate Blocks are per Channel
+ 1 to indicate Blocks are per Port.
+ Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-group-count:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be in range 1 to 4 to indicate how many sample
+ intervals are combined into a payload.
+ Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-lane-control:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be in range 0 to 7 to identify which data lane
+ the data port uses.
+ Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstart:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be number identifying lowerst numbered coloum in
+ SoundWire Frame, i.e. left edge of the Transport sub-frame
+ for each port. Values between 0 and 15 are valid.
+ Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstop:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be number identifying highest numbered coloum in
+ SoundWire Frame, i.e. the right edge of the Transport
+ sub-frame for each port. Values between 0 and 15 are valid.
+ Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,dports-type:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: should be one of the following types
+ 0 for reduced port
+ 1 for simple ports
+ 2 for full port
+ Out ports followed by In ports.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+Note:
+ More Information on detail of encoding of these fields can be
+found in MIPI Alliance SoundWire 1.0 Specifications.
+
+= SoundWire devices
+Each subnode of the bus represents SoundWire device attached to it.
+The properties of these nodes are defined by the individual bindings.
+
+= EXAMPLE
+The following example represents a SoundWire controller on DB845c board
+which has controller integrated inside WCD934x codec on SDM845 SoC.
+
+soundwire: soundwire@c85 {
+ compatible = "qcom,soundwire-v1.3.0";
+ reg = <0xc85 0x20>;
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&wcc>;
+ clock-names = "iface";
+ #sound-dai-cells = <1>;
+ qcom,dports-type = <0>;
+ qcom,dout-ports = <6>;
+ qcom,din-ports = <2>;
+ qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
+
+ /* Left Speaker */
+ left{
+ ....
+ };
+
+ /* Right Speaker */
+ right{
+ ....
+ };
+};