4 files changed, 72 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt b/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt
new file mode 100644
index 000000000000..16ea1d3b2e9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cortina,gemini-timer.txt
@@ -0,0 +1,22 @@
+Cortina Systems Gemini timer
+
+This timer is embedded in the Cortina Systems Gemini SoCs.
+
+Required properties:
+
+- compatible : Must be "cortina,gemini-timer"
+- reg : Should contain registers location and length
+- interrupts : Should contain the three timer interrupts with
+  flags for rising edge
+- syscon : a phandle to the global Gemini system controller
+
+Example:
+
+timer@43000000 {
+	compatible = "cortina,gemini-timer";
+	reg = <0x43000000 0x1000>;
+	interrupts = <14 IRQ_TYPE_EDGE_RISING>, /* Timer 1 */
+		   <15 IRQ_TYPE_EDGE_RISING>, /* Timer 2 */
+		   <16 IRQ_TYPE_EDGE_RISING>; /* Timer 3 */
+	syscon = <&syscon>;
+};
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
new file mode 100644
index 000000000000..e3cfce8fecc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
@@ -0,0 +1,17 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible :	should be "ezchip,nps400-timer0"
+
+Clocks required for compatible = "ezchip,nps400-timer0":
+- interrupts : The interrupt of the first timer
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+	compatible = "ezchip,nps400-timer0";
+	interrupts = <3>;
+	clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
index c8c03d700382..c0ab4190b8fb 100644
--- a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
@@ -2,14 +2,14 @@ NPS Network Processor
 
 Required properties:
 
-- compatible :	should be "ezchip,nps400-timer"
+- compatible :	should be "ezchip,nps400-timer1"
 
-Clocks required for compatible = "ezchip,nps400-timer":
+Clocks required for compatible = "ezchip,nps400-timer1":
 - clocks : Must contain a single entry describing the clock input
 
 Example:
 
 timer {
-	compatible = "ezchip,nps400-timer";
+	compatible = "ezchip,nps400-timer1";
 	clocks = <&sysclk>;
 };
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
new file mode 100644
index 000000000000..be3ae0fdf775
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
@@ -0,0 +1,30 @@
+* Renesas OS Timer (OSTM)
+
+The OSTM is a multi-channel 32-bit timer/counter with fixed clock
+source that can operate in either interval count down timer or free-running
+compare match mode.
+
+Channels are independent from each other.
+
+Required Properties:
+
+  - compatible: must be one or more of the following:
+    - "renesas,r7s72100-ostm" for the r7s72100 OSTM
+    - "renesas,ostm" for any OSTM
+		This is a fallback for the above renesas,*-ostm entries
+
+  - reg: base address and length of the register block for a timer channel.
+
+  - interrupts: interrupt specifier for the timer channel.
+
+  - clocks: clock specifier for the timer channel.
+
+Example: R7S72100 (RZ/A1H) OSTM node
+
+	ostm0: timer@fcfec000 {
+		compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+		reg = <0xfcfec000 0x30>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+		power-domains = <&cpg_clocks>;
+	};