diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb')
16 files changed, 394 insertions, 110 deletions
diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt index b9f04e617eb7..6ffb09be7a76 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt @@ -85,8 +85,8 @@ A child node must exist to represent the core DWC2 IP block. The name of the node is not important. The content of the node is defined in dwc2.txt. PHY documentation is provided in the following places: -- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt -- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt +- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml Example device nodes: usb: usb@ffe09000 { diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 059f6ef1ad4a..1ca64c85191a 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -63,7 +63,11 @@ properties: description: Set this flag to force EHCI reset after resume. - phys: true + phys: + description: PHY specifier for the USB PHY + + phy-names: + const: usb required: - compatible @@ -89,6 +93,7 @@ examples: interrupts = <39>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; + phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index da5a14becbe5..bcffec1f1341 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -67,7 +67,11 @@ properties: description: Overrides the detected port count - phys: true + phys: + description: PHY specifier for the USB PHY + + phy-names: + const: usb required: - compatible @@ -84,6 +88,7 @@ examples: interrupts = <64>; clocks = <&usb_clk 6>, <&ahb_gates 2>; phys = <&usbphy 1>; + phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index f3e4acecabe8..42d8814f903a 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -33,7 +33,7 @@ Required properties: "dma_ck": dma_bus clock for data transfer by DMA, "xhci_ck": controller clock - - phys : see usb-hcd.txt in the current directory + - phys : see usb-hcd.yaml in the current directory Optional properties: - wakeup-source : enable USB remote wakeup; @@ -53,7 +53,7 @@ Optional properties: See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - imod-interval-ns: default interrupt moderation interval is 5000ns -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. Example: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index b9af7f5ee91d..e0ae6096f7ac 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -17,7 +17,7 @@ Required properties: - clock-names : must contain "sys_ck" for clock of controller, the following clocks are optional: "ref_ck", "mcu_ck" and "dma_ck"; - - phys : see usb-hcd.txt in the current directory + - phys : see usb-hcd.yaml in the current directory - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -60,7 +60,7 @@ Optional properties: - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, bit1 for u3port1, ... etc; -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. Sub-nodes: diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt deleted file mode 100644 index 35039e720515..000000000000 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt +++ /dev/null @@ -1,41 +0,0 @@ -Renesas Electronics USB3.0 Peripheral driver - -Required properties: - - compatible: Must contain one of the following: - - "renesas,r8a774a1-usb3-peri" - - "renesas,r8a774c0-usb3-peri" - - "renesas,r8a7795-usb3-peri" - - "renesas,r8a7796-usb3-peri" - - "renesas,r8a77965-usb3-peri" - - "renesas,r8a77990-usb3-peri" - - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 or RZ/G2 - compatible device - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - - - reg: Base address and length of the register for the USB3.0 Peripheral - - interrupts: Interrupt specifier for the USB3.0 Peripheral - - clocks: clock phandle and specifier pair - -Optional properties: - - phys: phandle + phy specifier pair - - phy-names: must be "usb" - -Example of R-Car H3 ES1.x: - usb3_peri0: usb@ee020000 { - compatible = "renesas,r8a7795-usb3-peri", - "renesas,rcar-gen3-usb3-peri"; - reg = <0 0xee020000 0 0x400>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 328>; - }; - - usb3_peri1: usb@ee060000 { - compatible = "renesas,r8a7795-usb3-peri", - "renesas,rcar-gen3-usb3-peri"; - reg = <0 0xee060000 0 0x400>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml new file mode 100644 index 000000000000..92d8631b9aa6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/renesas,usb3-peri.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas USB 3.0 Peripheral controller + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-usb3-peri # RZ/G2M + - renesas,r8a774b1-usb3-peri # RZ/G2N + - renesas,r8a774c0-usb3-peri # RZ/G2E + - renesas,r8a7795-usb3-peri # R-Car H3 + - renesas,r8a7796-usb3-peri # R-Car M3-W + - renesas,r8a77965-usb3-peri # R-Car M3-N + - renesas,r8a77990-usb3-peri # R-Car E3 + - const: renesas,rcar-gen3-usb3-peri + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: usb + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. + + companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of a companion. + + port: + description: | + any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. + +required: + - compatible + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a774c0-sysc.h> + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + companion = <&xhci0>; + usb-role-switch; + + port { + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.txt b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt deleted file mode 100644 index e39255ea6e4f..000000000000 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.txt +++ /dev/null @@ -1,57 +0,0 @@ -Renesas Electronics USBHS driver - -Required properties: - - compatible: Must contain one or more of the following: - - - "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device - - "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device - - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device - - "renesas,usbhs-r8a77470" for r8a77470 (RZ/G1C) compatible device - - "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device - - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device - - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device - - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device - - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device - - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device - - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device - - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device - - "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device - - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices - - "renesas,rza1-usbhs" for RZ/A1 compatible device - - "renesas,rza2-usbhs" for RZ/A2 compatible device - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first followed - by the generic version. - - - reg: Base address and length of the register for the USBHS - - interrupts: Interrupt specifier for the USBHS - - clocks: A list of phandle + clock specifier pairs. - - In case of "renesas,rcar-gen3-usbhs", two clocks are required. - First clock should be peripheral and second one should be host. - - In case of except above, one clock is required. First clock - should be peripheral. - -Optional properties: - - renesas,buswait: Integer to use BUSWAIT register - - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB - function should be enabled - - phys: phandle + phy specifier pair - - phy-names: must be "usb" - - dmas: Must contain a list of references to DMA specifiers. - - dma-names : named "ch%d", where %d is the channel number ranging from zero - to the number of channels (DnFIFOs) minus one. - -Example: - usbhs: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; - }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml new file mode 100644 index 000000000000..469affa872d3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/renesas,usbhs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas USBHS (HS-USB) controller + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + oneOf: + - items: + - const: renesas,usbhs-r7s72100 # RZ/A1 + - const: renesas,rza1-usbhs + + - items: + - const: renesas,usbhs-r7s9210 # RZ/A2 + - const: renesas,rza2-usbhs + + - items: + - enum: + - renesas,usbhs-r8a7743 # RZ/G1M + - renesas,usbhs-r8a7744 # RZ/G1N + - renesas,usbhs-r8a7745 # RZ/G1E + - renesas,usbhs-r8a77470 # RZ/G1C + - renesas,usbhs-r8a7790 # R-Car H2 + - renesas,usbhs-r8a7791 # R-Car M2-W + - renesas,usbhs-r8a7792 # R-Car V2H + - renesas,usbhs-r8a7793 # R-Car M2-N + - renesas,usbhs-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-usbhs + + - items: + - enum: + - renesas,usbhs-r8a774a1 # RZ/G2M + - renesas,usbhs-r8a774b1 # RZ/G2N + - renesas,usbhs-r8a774c0 # RZ/G2E + - renesas,usbhs-r8a7795 # R-Car H3 + - renesas,usbhs-r8a7796 # R-Car M3-W + - renesas,usbhs-r8a77965 # R-Car M3-N + - renesas,usbhs-r8a77990 # R-Car E3 + - renesas,usbhs-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-usbhs + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + items: + - description: USB 2.0 host + - description: USB 2.0 peripheral + - description: USB 2.0 clock selector + + interrupts: + maxItems: 1 + + renesas,buswait: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Integer to use BUSWAIT register. + + renesas,enable-gpio: + description: | + gpio specifier to check GPIO determining if USB function should be + enabled. + + phys: + maxItems: 1 + items: + - description: phandle + phy specifier pair. + + phy-names: + maxItems: 1 + items: + - const: usb + + dmas: + minItems: 2 + maxItems: 4 + + dma-names: + minItems: 2 + maxItems: 4 + items: + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + + dr_mode: true + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + items: + - description: USB 2.0 host + - description: USB 2.0 peripheral + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + usbhs: usb@e6590000 { + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + }; diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt index d4cf53c071d9..e3fc57e605ed 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt @@ -6,10 +6,39 @@ Required properties: - interrupts : <a b> where a is the interrupt number and b represents an encoding of the sense and level information for the interrupt. +Required sub-node: +- connector: The "usb-c-connector" attached to the tcpci chip, the bindings + of connector node are specified in + Documentation/devicetree/bindings/connector/usb-connector.txt + Example : rt1711h@4e { compatible = "richtek,rt1711h"; reg = <0x4e>; interrupt-parent = <&gpio26>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 12000, 2000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt new file mode 100644 index 000000000000..25780e945b15 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt @@ -0,0 +1,38 @@ +TI HD3SS3220 TypeC DRP Port Controller. + +Required properties: + - compatible: Must be "ti,hd3ss3220". + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. + - interrupts: An interrupt specifier. + +Required sub-node: + - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The + bindings of the connector node are specified in: + + Documentation/devicetree/bindings/connector/usb-connector.txt + +Example: +hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hd3ss3220_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml new file mode 100644 index 000000000000..5f5264b2e9ad --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/ti,j721e-usb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller + +maintainers: + - Roger Quadros <rogerq@ti.com> + +properties: + compatible: + items: + - const: ti,j721e-usb + + reg: + description: module registers + + power-domains: + description: + PM domain provider node and an args specifier containing + the USB device id value. See, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + + clocks: + description: Clock phandles to usb2_refclk and lpm_clk + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ref + - const: lpm + + ti,usb2-only: + description: + If present, it restricts the controller to USB2.0 mode of + operation. Must be present if USB3 PHY is not available + for USB. + type: boolean + + ti,vbus-divider: + description: + Should be present if USB VBUS line is connected to the + VBUS pin of the SoC via a 1/3 voltage divider. + type: boolean + +required: + - compatible + - reg + - power-domains + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + cdns_usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 15>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + + usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 9c8c56d3a792..7263b7f2b510 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -18,8 +18,13 @@ properties: description: List of all the USB PHYs on this HCD + phy-names: + description: + Name specifier for the USB PHY + examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb"; }; diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt index cc2e6f7d602e..d1702eb2c8bd 100644 --- a/Documentation/devicetree/bindings/usb/usb-uhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt @@ -6,7 +6,7 @@ Required properties: - reg : Should contain 1 register ranges(address and length) - interrupts : UHCI controller interrupt -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. Example: diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 97400e8f8605..3f378951d624 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -10,6 +10,7 @@ Required properties: - "renesas,xhci-r8a7743" for r8a7743 SoC - "renesas,xhci-r8a7744" for r8a7744 SoC - "renesas,xhci-r8a774a1" for r8a774a1 SoC + - "renesas,xhci-r8a774b1" for r8a774b1 SoC - "renesas,xhci-r8a774c0" for r8a774c0 SoC - "renesas,xhci-r8a7790" for r8a7790 SoC - "renesas,xhci-r8a7791" for r8a7791 SoC @@ -41,9 +42,9 @@ Optional properties: - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism - imod-interval-ns: default interrupt moderation interval is 5000ns - - phys : see usb-hcd.txt in the current directory + - phys : see usb-hcd.yaml in the current directory -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 17915f64b8ee..1a934eab175e 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -7,11 +7,12 @@ Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", - "microchip,usb2517", "microchip,usb2517i" + "microchip,usb2517", "microchip,usb2517i", "microchip,usb2422" - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : - reset-gpios : Should specify the gpio for hub reset + - vdd-supply : Should specify the phandle to the regulator supplying vdd - skip-config : Skip Hub configuration, but only send the USB-Attach command - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - product-id : Set USB Product ID of the hub (16 bit, default depends on type) |