diff options
Diffstat (limited to 'Documentation/devicetree')
23 files changed, 507 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/arm/armv7m_systick.txt b/Documentation/devicetree/bindings/arm/armv7m_systick.txt new file mode 100644 index 000000000000..7cf4a24601eb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armv7m_systick.txt @@ -0,0 +1,26 @@ +* ARMv7M System Timer + +ARMv7-M includes a system timer, known as SysTick. Current driver only +implements the clocksource feature. + +Required properties: +- compatible : Should be "arm,armv7m-systick" +- reg : The address range of the timer + +Required clocking property, have to be one of: +- clocks : The input clock of the timer +- clock-frequency : The rate in HZ in input of the ARM SysTick + +Examples: + +systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clocks = <&clk_systick>; +}; + +systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clock-frequency = <90000000>; +}; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 7a4d4926f44e..5ba6450693b9 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -248,7 +248,7 @@ Required properties for peripheral clocks: - #address-cells : shall be 1 (reg is used to encode clk id). - clocks : shall be the master clock phandle. e.g. clocks = <&mck>; -- name: device tree node describing a specific system clock. +- name: device tree node describing a specific peripheral clock. * #clock-cells : from common clock binding; shall be set to 0. * reg: peripheral id. See Atmel's datasheets to get a full list of peripheral ids. diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt index 38988ef1336b..f0d926bf9f36 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt @@ -1,9 +1,11 @@ -Freescale SoC SEC Security Engines versions 2.x-3.x +Freescale SoC SEC Security Engines versions 1.x-2.x-3.x Required properties: - compatible : Should contain entries for this and backward compatible - SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" + SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" (SEC2/3) + e.g., "fsl,sec1.2", "fsl,sec1.0" (SEC1) + warning: SEC1 and SEC2 are mutually exclusive - reg : Offset and length of the register set for the device - interrupts : the SEC's interrupt number - fsl,num-channels : An integer representing the number of channels diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt new file mode 100644 index 000000000000..c6c6a4a045bd --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt @@ -0,0 +1,45 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible: should be one of the following string + "marvell,orion-crypto" + "marvell,kirkwood-crypto" + "marvell,dove-crypto" + "marvell,armada-370-crypto" + "marvell,armada-xp-crypto" + "marvell,armada-375-crypto" + "marvell,armada-38x-crypto" +- reg: base physical address of the engine and length of memory mapped + region. Can also contain an entry for the SRAM attached to the CESA, + but this representation is deprecated and marvell,crypto-srams should + be used instead +- reg-names: "regs". Can contain an "sram" entry, but this representation + is deprecated and marvell,crypto-srams should be used instead +- interrupts: interrupt number +- clocks: reference to the crypto engines clocks. This property is not + required for orion and kirkwood platforms +- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine + id. + This property is not required for the orion and kirkwoord + platforms. + "cesazX" clocks are not required on armada-370 platforms +- marvell,crypto-srams: phandle to crypto SRAM definitions + +Optional properties: +- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not + specified the whole SRAM is used (2KB) + + +Examples: + + crypto@90000 { + compatible = "marvell,armada-xp-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>, <49>; + clocks = <&gateclk 23>, <&gateclk 23>; + clock-names = "cesa0", "cesa1"; + marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; + marvell,crypto-sram-size = <0x600>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt index 47229b1a594b..c0c35f00335b 100644 --- a/Documentation/devicetree/bindings/crypto/mv_cesa.txt +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -1,20 +1,33 @@ Marvell Cryptographic Engines And Security Accelerator Required properties: -- compatible : should be "marvell,orion-crypto" -- reg : base physical address of the engine and length of memory mapped - region, followed by base physical address of sram and its memory - length -- reg-names : "regs" , "sram"; -- interrupts : interrupt number +- compatible: should be one of the following string + "marvell,orion-crypto" + "marvell,kirkwood-crypto" + "marvell,dove-crypto" +- reg: base physical address of the engine and length of memory mapped + region. Can also contain an entry for the SRAM attached to the CESA, + but this representation is deprecated and marvell,crypto-srams should + be used instead +- reg-names: "regs". Can contain an "sram" entry, but this representation + is deprecated and marvell,crypto-srams should be used instead +- interrupts: interrupt number +- clocks: reference to the crypto engines clocks. This property is only + required for Dove platforms +- marvell,crypto-srams: phandle to crypto SRAM definitions + +Optional properties: +- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not + specified the whole SRAM is used (2KB) Examples: crypto@30000 { compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0x4000000 0x800>; - reg-names = "regs" , "sram"; + reg = <0x30000 0x10000>; + reg-names = "regs"; interrupts = <22>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x600>; status = "okay"; }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt new file mode 100644 index 000000000000..435f1bcca341 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt @@ -0,0 +1,65 @@ +Broadcom STB "UPG GIO" GPIO controller + +The controller's registers are organized as sets of eight 32-bit +registers with each set controlling a bank of up to 32 pins. A single +interrupt is shared for all of the banks handled by the controller. + +Required properties: + +- compatible: + Must be "brcm,brcmstb-gpio" + +- reg: + Define the base and range of the I/O address space containing + the brcmstb GPIO controller registers + +- #gpio-cells: + Should be <2>. The first cell is the pin number (within the controller's + pin space), and the second is used for the following: + bit[0]: polarity (0 for active-high, 1 for active-low) + +- gpio-controller: + Specifies that the node is a GPIO controller. + +- brcm,gpio-bank-widths: + Number of GPIO lines for each bank. Number of elements must + correspond to number of banks suggested by the 'reg' property. + +Optional properties: + +- interrupts: + The interrupt shared by all GPIO lines for this controller. + +- interrupt-parent: + phandle of the parent interrupt controller + +- #interrupt-cells: + Should be <2>. The first cell is the GPIO number, the second should specify + flags. The following subset of flags is supported: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. + See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +- interrupt-controller: + Marks the device node as an interrupt controller + +- interrupt-names: + The name of the IRQ resource used by this controller + +Example: + upg_gio: gpio@f040a700 { + #gpio-cells = <0x2>; + #interrupt-cells = <0x2>; + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + gpio-controller; + interrupt-controller; + reg = <0xf040a700 0x80>; + interrupt-parent = <0xf>; + interrupts = <0x6>; + interrupt-names = "upg_gio"; + brcm,gpio-bank-widths = <0x20 0x20 0x20 0x18>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt new file mode 100644 index 000000000000..abf4db736c6e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt @@ -0,0 +1,21 @@ +Axis ETRAX FS General I/O controller bindings + +Required properties: + +- compatible: + - "axis,etraxfs-gio" +- reg: Physical base address and length of the controller's registers. +- #gpio-cells: Should be 3 + - The first cell is the gpio offset number. + - The second cell is reserved and is currently unused. + - The third cell is the port number (hex). +- gpio-controller: Marks the device node as a GPIO controller. + +Example: + + gio: gpio@b001a000 { + compatible = "axis,etraxfs-gio"; + reg = <0xb001a000 0x1000>; + gpio-controller; + #gpio-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt new file mode 100644 index 000000000000..262ee4ddf2cb --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt @@ -0,0 +1,47 @@ +Netlogic XLP Family GPIO +======================== + +This GPIO driver is used for following Netlogic XLP SoCs: + XLP832, XLP316, XLP208, XLP980, XLP532 + +Required properties: +------------------- + +- compatible: Should be one of the following: + - "netlogic,xlp832-gpio": For Netlogic XLP832 + - "netlogic,xlp316-gpio": For Netlogic XLP316 + - "netlogic,xlp208-gpio": For Netlogic XLP208 + - "netlogic,xlp980-gpio": For Netlogic XLP980 + - "netlogic,xlp532-gpio": For Netlogic XLP532 +- reg: Physical base address and length of the controller's registers. +- #gpio-cells: Should be two. The first cell is the pin number and the second + cell is used to specify optional parameters (currently unused). +- gpio-controller: Marks the device node as a GPIO controller. +- nr-gpios: Number of GPIO pins supported by the controller. +- interrupt-cells: Should be two. The first cell is the GPIO Number. The + second cell is used to specify flags. The following subset of flags is + supported: + - trigger type: + 1 = low to high edge triggered. + 2 = high to low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. +- interrupts: Interrupt number for this device. +- interrupt-parent: phandle of the parent interrupt controller. +- interrupt-controller: Identifies the node as an interrupt controller. + +Example: + + gpio: xlp_gpio@34000 { + compatible = "netlogic,xlp316-gpio"; + reg = <0 0x34100 0x1000 + 0 0x35100 0x1000>; + #gpio-cells = <2>; + gpio-controller; + nr-gpios = <57>; + + #interrupt-cells = <2>; + interrupt-parent = <&pic>; + interrupts = <39>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt index 986371a4be2c..db4c6a663c03 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt @@ -6,7 +6,7 @@ Required properties: - First cell is the GPIO line number - Second cell is used to specify optional parameters (unused) -- compatible : Should be "xlnx,zynq-gpio-1.0" +- compatible : Should be "xlnx,zynq-gpio-1.0" or "xlnx,zynqmp-gpio-1.0" - clocks : Clock specifier (see clock bindings for details) - gpio-controller : Marks the device node as a GPIO controller. - interrupts : Interrupt specifier (see interrupt bindings for diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt new file mode 100644 index 000000000000..eb7cdd69e10b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt @@ -0,0 +1,39 @@ +NXP LPC18xx/43xx GPIO controller Device Tree Bindings +----------------------------------------------------- + +Required properties: +- compatible : Should be "nxp,lpc1850-gpio" +- reg : Address and length of the register set for the device +- clocks : Clock specifier (see clock bindings for details) +- gpio-controller : Marks the device node as a GPIO controller. +- #gpio-cells : Should be two + - First cell is the GPIO line number + - Second cell is used to specify polarity + +Optional properties: +- gpio-ranges : Mapping between GPIO and pinctrl + +Example: +#define LPC_GPIO(port, pin) (port * 32 + pin) +#define LPC_PIN(port, pin) (0x##port * 32 + pin) + +gpio: gpio@400f4000 { + compatible = "nxp,lpc1850-gpio"; + reg = <0x400f4000 0x4000>; + clocks = <&ccu1 CLK_CPU_GPIO>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, + ... + <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; +}; + +gpio_joystick { + compatible = "gpio-keys-polled"; + ... + + button@0 { + ... + gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index fcca8e744f41..a04a80f9cc70 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -9,6 +9,7 @@ Requires node properties: "murata,ncp21wb473" "murata,ncp03wb473" "murata,ncp15wl333" + "murata,ncp03wf104" /* Usage of vendor name "ntc" is deprecated */ <DEPRECATED> "ntc,ncp15wb473" diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt index f292917fa00d..0e9f09a6a2fe 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" - <chip> can be "at91rm9200", "sama5d3" or "sama5d4" + <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt index 4f7946ae8adc..772c550d3b4b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt @@ -13,9 +13,12 @@ Required properties: - reg: Base address and length of each register bank used by the external IRQ pins driven by the interrupt controller hardware module. The base addresses, length and number of required register banks varies with soctype. - +- interrupt-controller: Identifies the node as an interrupt controller. - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory + interrupts.txt in this directory. +- interrupts: Must contain a list of interrupt specifiers. For each interrupt + provided by this irqpin controller instance, there must be one entry, + referring to the corresponding parent interrupt. Optional properties: @@ -25,3 +28,35 @@ Optional properties: if different from the default 4 bits - control-parent: disable and enable interrupts on the parent interrupt controller, needed for some broken implementations +- clocks: Must contain a reference to the functional clock. This property is + mandatory if the hardware implements a controllable functional clock for + the irqpin controller instance. +- power-domains: Must contain a reference to the power domain. This property is + mandatory if the irqpin controller instance is part of a controllable power + domain. + + +Example +------- + + irqpin1: interrupt-controller@e6900004 { + compatible = "renesas,intc-irqpin-r8a7740", + "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 98ee2abbe138..7e9490313d5a 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -8,7 +8,8 @@ Device Tree Bindings for the Arasan SDHCI Controller [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Required Properties: - - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' + - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or + 'arasan,sdhci-4.9a' - reg: From mmc bindings: Register location and length. - clocks: From clock bindings: Handles to clock inputs. - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 415c5575cbf7..5d0376b8f202 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -7,7 +7,14 @@ This file documents differences between the core properties described by mmc.txt and the properties used by the sdhci-esdhc-imx driver. Required properties: -- compatible : Should be "fsl,<chip>-esdhc" +- compatible : Should be "fsl,<chip>-esdhc", the supported chips include + "fsl,imx25-esdhc" + "fsl,imx35-esdhc" + "fsl,imx51-esdhc" + "fsl,imx53-esdhc" + "fsl,imx6q-usdhc" + "fsl,imx6sl-usdhc" + "fsl,imx6sx-usdhc" Optional properties: - fsl,cd-controller : Indicate to use controller internal card detection diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index 3b3544931437..df370585cbcc 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -13,6 +13,10 @@ Required Properties: * compatible: should be one of the following. - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. + - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions. + +Optional Properties: +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. Example: @@ -42,3 +46,27 @@ Example: cap-mmc-highspeed; cap-sd-highspeed; }; + + /* for Hi6220 */ + + dwmmc_1: dwmmc1@f723e000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + bus-width = <0x4>; + disable-wp; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + card-detect-delay = <200>; + hisilicon,peripheral-syscon = <&ao_ctrl>; + reg = <0x0 0xf723e000 0x0 0x1000>; + interrupts = <0x0 0x49 0x4>; + clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>; + clock-names = "ciu", "biu"; + cd-gpios = <&gpio1 0 1>; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; + pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index a462c50f19a8..ce0e76749671 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -21,5 +21,7 @@ Example: sdhci0_pwrseq { compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio1 12 0>; + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + clocks = <&clk_32768_ck>; + clock-names = "ext_clock"; } diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 438899e8829b..0384fc3f64e8 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -21,6 +21,11 @@ Optional properties: below for the case, when a GPIO is used for the CD line - wp-inverted: when present, polarity on the WP line is inverted. See the note below for the case, when a GPIO is used for the WP line +- disable-wp: When set no physical WP line is present. This property should + only be specified when the controller has a dedicated write-protect + detection logic. If a GPIO is always used for the write-protect detection + logic it is sufficient to not specify wp-gpios property in the absence of a WP + line. - max-frequency: maximum operating clock frequency - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on this system, even if the controller claims it is. diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt new file mode 100644 index 000000000000..a1adfa495ad3 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -0,0 +1,32 @@ +* MTK MMC controller + +The MTK MSDC can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties in mmc.txt +and the properties used by the msdc driver. + +Required properties: +- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- interrupts: Should contain MSDC interrupt number +- clocks: MSDC source clock, HCLK +- clock-names: "source", "hclk" +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl +- vmmc-supply: power to the Core +- vqmmc-supply: power to the IO + +Examples: +mmc0: mmc@11230000 { + compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x108>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, <&topckgen CLK_TOP_MSDC50_0_H_SEL>; + clock-names = "source", "hclk"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; +}; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt index 299081f94abd..d38942f6c5ae 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -18,6 +18,8 @@ Required properties: dma-names property. - dma-names: must contain "tx" for the transmit DMA channel and "rx" for the receive DMA channel. +- max-frequency: Maximum operating clock frequency, driver uses default clock + frequency if it is not set. Example: R8A7790 (R-Car H2) MMCIF0 @@ -29,4 +31,5 @@ Example: R8A7790 (R-Car H2) MMCIF0 clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; + max-frequency = <97500000>; }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt new file mode 100644 index 000000000000..36d881c8e6d4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -0,0 +1,68 @@ +* AppliedMicro X-Gene v1 PCIe MSI controller + +Required properties: + +- compatible: should be "apm,xgene1-msi" to identify + X-Gene v1 PCIe MSI controller block. +- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- reg: physical base address (0x79000000) and length (0x900000) for controller + registers. These registers include the MSI termination address and data + registers as well as the MSI interrupt status registers. +- reg-names: not required +- interrupts: A list of 16 interrupt outputs of the controller, starting from + interrupt number 0x10 to 0x1f. +- interrupt-names: not required + +Each PCIe node needs to have property msi-parent that points to msi controller node + +Examples: + +SoC DTSI: + + + MSI node: + msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = <0x0 0x10 0x4> + <0x0 0x11 0x4> + <0x0 0x12 0x4> + <0x0 0x13 0x4> + <0x0 0x14 0x4> + <0x0 0x15 0x4> + <0x0 0x16 0x4> + <0x0 0x17 0x4> + <0x0 0x18 0x4> + <0x0 0x19 0x4> + <0x0 0x1a 0x4> + <0x0 0x1b 0x4> + <0x0 0x1c 0x4> + <0x0 0x1d 0x4> + <0x0 0x1e 0x4> + <0x0 0x1f 0x4>; + }; + + + PCIe controller node with msi-parent property pointing to MSI node: + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + msi-parent= <&msi>; + }; diff --git a/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt new file mode 100644 index 000000000000..51b05a0e70d1 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt @@ -0,0 +1,26 @@ +* NXP LPC3220 timer + +The NXP LPC3220 timer is used on a wide range of NXP SoCs. This +includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts. + +Required properties: +- compatible: + Should be "nxp,lpc3220-timer". +- reg: + Address and length of the register set. +- interrupts: + Reference to the timer interrupt +- clocks: + Should contain a reference to timer clock. +- clock-names: + Should contain "timerclk". + +Example: + +timer1: timer@40085000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40085000 0x1000>; + interrupts = <13>; + clocks = <&ccu1 CLK_CPU_TIMER1>; + clock-names = "timerclk"; +}; diff --git a/Documentation/devicetree/bindings/timer/st,stm32-timer.txt b/Documentation/devicetree/bindings/timer/st,stm32-timer.txt new file mode 100644 index 000000000000..8ef28e70d6e8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/st,stm32-timer.txt @@ -0,0 +1,22 @@ +. STMicroelectronics STM32 timer + +The STM32 MCUs family has several general-purpose 16 and 32 bits timers. + +Required properties: +- compatible : Should be "st,stm32-timer" +- reg : Address and length of the register set +- clocks : Reference on the timer input clock +- interrupts : Reference to the timer interrupt + +Optional properties: +- resets: Reference to a reset controller asserting the timer + +Example: + +timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + resets = <&rrc 259>; + clocks = <&clk_pmtr1>; +}; |