diff options
Diffstat (limited to 'Documentation/devicetree')
146 files changed, 6152 insertions, 1551 deletions
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 395359dc94fd..fd0061712443 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -86,13 +86,11 @@ This binding uses the common clock binding[1]. Required properties: - compatible: Should be one of: - "fsl,imx8qm-clock" - "fsl,imx8qxp-clock" + "fsl,imx8qm-clk" + "fsl,imx8qxp-clk" followed by "fsl,scu-clk" -- #clock-cells: Should be either - 2: Contains the Resource and Clock ID value. - or - 1: Contains the Clock ID value. (DEPRECATED) +- #clock-cells: Should be 2. + Contains the Resource and Clock ID value. - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names - clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt deleted file mode 100644 index 897eedfa2bc8..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt +++ /dev/null @@ -1,57 +0,0 @@ -NVIDIA Tegra Activity Monitor - -The activity monitor block collects statistics about the behaviour of other -components in the system. This information can be used to derive the rate at -which the external memory needs to be clocked in order to serve all requests -from the monitored clients. - -Required properties: -- compatible: should be "nvidia,tegra<chip>-actmon" -- reg: offset and length of the register set for the device -- interrupts: standard interrupt property -- clocks: Must contain a phandle and clock specifier pair for each entry in -clock-names. See ../../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - actmon - - emc -- resets: Must contain an entry for each entry in reset-names. See -../../reset/reset.txt for details. -- reset-names: Must include the following entries: - - actmon -- operating-points-v2: See ../bindings/opp/opp.txt for details. -- interconnects: Should contain entries for memory clients sitting on - MC->EMC memory interconnect path. -- interconnect-names: Should include name of the interconnect path for each - interconnect entry. Consult TRM documentation for - information about available memory clients, see MEMORY - CONTROLLER section. - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: bitfield indicating SoC speedo ID mask -- opp-peak-kBps: peak bandwidth of the memory channel - -Example: - dfs_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp@12750000 { - opp-hz = /bits/ 64 <12750000>; - opp-supported-hw = <0x000F>; - opp-peak-kBps = <51000>; - }; - ... - }; - - actmon@6000c800 { - compatible = "nvidia,tegra124-actmon"; - reg = <0x0 0x6000c800 0x0 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_ACTMON>, - <&tegra_car TEGRA124_CLK_EMC>; - clock-names = "actmon", "emc"; - resets = <&tegra_car 119>; - reset-names = "actmon"; - operating-points-v2 = <&dfs_opp_table>; - interconnects = <&mc TEGRA124_MC_MPCORER &emc>; - interconnect-names = "cpu"; - }; diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt deleted file mode 100644 index 2be1e038ca62..000000000000 --- a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt +++ /dev/null @@ -1,19 +0,0 @@ -Binding for simple gpio clock multiplexer. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "gpio-mux-clock". -- clocks: list of two references to parent clocks. -- #clock-cells : from common clock binding; shall be set to 0. -- select-gpios : GPIO reference for selecting the parent clock. - -Example: - clock { - compatible = "gpio-mux-clock"; - clocks = <&parentclk1>, <&parentclk2>; - #clock-cells = <0>; - select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml new file mode 100644 index 000000000000..1e21f8b3a4ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/gpio-mux-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple GPIO clock multiplexer + +maintainers: + - Sergej Sawazki <ce3a@gmx.de> + +properties: + compatible: + const: gpio-mux-clock + + clocks: + items: + - description: First parent clock + - description: Second parent clock + + '#clock-cells': + const: 0 + + select-gpios: + description: GPIO reference for selecting the parent clock. + maxItems: 1 + +required: + - compatible + - clocks + - '#clock-cells' + - select-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + clock { + compatible = "gpio-mux-clock"; + clocks = <&parentclk1>, <&parentclk2>; + #clock-cells = <0>; + select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml new file mode 100644 index 000000000000..3ceb29cec704 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/hisilicon,hi3559av100-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon SOC Clock for HI3559AV100 + +maintainers: + - Dongjiu Geng <gengdongjiu@huawei.com> + +description: | + Hisilicon SOC clock control module which supports the clocks, resets and + power domains on HI3559AV100. + + See also: + dt-bindings/clock/hi3559av100-clock.h + +properties: + compatible: + enum: + - hisilicon,hi3559av100-clock + - hisilicon,hi3559av100-shub-clock + + reg: + minItems: 1 + maxItems: 2 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 2 + description: | + First cell is reset request register offset. + Second cell is bit offset in reset request register. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@12010000 { + compatible = "hisilicon,hi3559av100-clock"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x0 0x12010000 0x0 0x10000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index c268debe5b8d..28675b0b80f1 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -60,7 +60,6 @@ properties: maxItems: 2 idt,xtal-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 9000 maximum: 22760 description: Optional load capacitor for XTAL1 and XTAL2 @@ -84,7 +83,6 @@ patternProperties: enum: [ 1800000, 2500000, 3300000 ] idt,slew-percent: description: The Slew rate control for CMOS single-ended. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 80, 85, 90, 100 ] required: diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml index c65b9458c0b6..6e80dbc8b8b9 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -22,6 +22,8 @@ select: enum: - ingenic,jz4740-cgu - ingenic,jz4725b-cgu + - ingenic,jz4760-cgu + - ingenic,jz4760b-cgu - ingenic,jz4770-cgu - ingenic,jz4780-cgu - ingenic,x1000-cgu @@ -49,6 +51,8 @@ properties: - enum: - ingenic,jz4740-cgu - ingenic,jz4725b-cgu + - ingenic,jz4760-cgu + - ingenic,jz4760b-cgu - ingenic,jz4770-cgu - ingenic,jz4780-cgu - ingenic,x1000-cgu @@ -93,6 +97,8 @@ required: patternProperties: "^usb-phy@[a-f0-9]+$": allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ] + "^mac-phy-ctrl@[a-f0-9]+$": + allOf: [ $ref: "../net/ingenic,mac.yaml#" ] additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml new file mode 100644 index 000000000000..9f239c3960d1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SM8250 + +maintainers: + - Jonathan Marek <jonathan@marek.ca> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SM8250. + + See also dt-bindings/clock/qcom,camcc-sm8250.h + +properties: + compatible: + const: qcom,sm8250-camcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index 0cdf53f41f84..6667261dc665 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -20,6 +20,7 @@ description: | properties: compatible: enum: + - qcom,sc8180x-dispcc - qcom,sm8150-dispcc - qcom,sm8250-dispcc diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml new file mode 100644 index 000000000000..ab12b391effc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM6125 + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM6125. + + See also: + - dt-bindings/clock/qcom,gcc-sm6125.h + +properties: + compatible: + const: qcom,gcc-sm6125 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@1400000 { + compatible = "qcom,gcc-sm6125"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index 490edad25830..8453eeddf30e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -26,9 +26,10 @@ description: | - dt-bindings/reset/qcom,gcc-msm8939.h - dt-bindings/clock/qcom,gcc-msm8660.h - dt-bindings/reset/qcom,gcc-msm8660.h - - dt-bindings/clock/qcom,gcc-msm8974.h - - dt-bindings/reset/qcom,gcc-msm8974.h + - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) + - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) - dt-bindings/clock/qcom,gcc-msm8994.h + - dt-bindings/clock/qcom,gcc-mdm9607.h - dt-bindings/clock/qcom,gcc-mdm9615.h - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) @@ -40,6 +41,8 @@ properties: - qcom,gcc-ipq4019 - qcom,gcc-ipq6018 - qcom,gcc-ipq8064 + - qcom,gcc-mdm9607 + - qcom,gcc-msm8226 - qcom,gcc-msm8660 - qcom,gcc-msm8916 - qcom,gcc-msm8939 diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index b44a0622fb3a..6cf5a7ec2b4c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -12,6 +12,7 @@ Required properties : "qcom,rpmcc-msm8660", "qcom,rpmcc" "qcom,rpmcc-apq8060", "qcom,rpmcc" + "qcom,rpmcc-msm8226", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8936", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml new file mode 100644 index 000000000000..30b2e3d0d25d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The Module Standby Mode block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + const: renesas,r9a07g044-cpg # RZ/G2{L,LC} + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Clock source to CPG can be either from external clock input (EXCLK) or + crystal oscillator (XIN/XOUT). + const: extal + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/r9a07g044-cpg.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/Module Standby Mode Clock Domain and + can be power-managed through Module Standby should refer to the CPG device + node in their "power-domains" property, as documented by the generic PM + Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the <dt-bindings/clock/r9a07g044-cpg.h>. + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044-cpg"; + reg = <0x11010000 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt index 504cce3abe46..ce55aba0ce22 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5341.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt @@ -24,9 +24,8 @@ it. The device type, speed grade and revision are determined runtime by probing. -The driver currently only supports XTAL input mode, and does not support any -fancy input configurations. They can still be programmed into the chip and -the driver will leave them "as is". +The driver currently does not support any fancy input configurations. They can +still be programmed into the chip and the driver will leave them "as is". ==I2C device node== @@ -45,9 +44,9 @@ Required properties: corresponding to inputs. Use a fixed clock for the "xtal" input. At least one must be present. - clock-names: One of: "xtal", "in0", "in1", "in2" -- vdd-supply: Regulator node for VDD Optional properties: +- vdd-supply: Regulator node for VDD - vdda-supply: Regulator node for VDDA - vdds-supply: Regulator node for VDDS - silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL @@ -60,7 +59,14 @@ Optional properties: be initialized, and always performs the soft-reset routine. Since this will temporarily stop all output clocks, don't do this if the chip is generating the CPU clock for example. +- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used + in EXTCLK (external reference clock) rather than XTAL (crystal) mode. - interrupts: Interrupt for INTRb pin. +- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V + rather than 1.8V thresholds. +- vddoX-supply (where X is an output index): Regulator node for VDDO for the + specified output. The driver selects the output VDD_SEL setting based on this + voltage. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -77,8 +83,6 @@ Required child node properties: - reg: number of clock output. Optional child node properties: -- vdd-supply: Regulator node for VDD for this output. The driver selects default - values for common-mode and amplitude based on the voltage. - silabs,format: Output format, one of: 1 = differential (defaults to LVDS levels) 2 = low-power (defaults to HCSL levels) diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index 4e385508f516..8b1ecb2ecdd5 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -54,7 +54,9 @@ properties: compatible: items: - - const: st,stm32mp1-rcc + - enum: + - st,stm32mp1-rcc-secure + - st,stm32mp1-rcc - const: syscon reg: @@ -71,7 +73,7 @@ additionalProperties: false examples: - | rcc: rcc@50000000 { - compatible = "st,stm32mp1-rcc", "syscon"; + compatible = "st,stm32mp1-rcc-secure", "syscon"; reg = <0x50000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index f207053e0550..d0fa1e02d06d 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -10,7 +10,10 @@ Required properties: - compatible : shall be: "st,clkgen-pll0" + "st,clkgen-pll0-a0" + "st,clkgen-pll0-c0" "st,clkgen-pll1" + "st,clkgen-pll1-c0" "st,stih407-clkgen-plla9" "st,stih418-clkgen-plla9" diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt index 7ff77fc57dff..55a18939bddd 100644 --- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt @@ -64,6 +64,16 @@ Required properties: audio use case) "st,flexgen-video", "st,flexgen" (enable clock propagation on parent and activate synchronous mode) + "st,flexgen-stih407-a0" + "st,flexgen-stih410-a0" + "st,flexgen-stih407-c0" + "st,flexgen-stih410-c0" + "st,flexgen-stih418-c0" + "st,flexgen-stih407-d0" + "st,flexgen-stih410-d0" + "st,flexgen-stih407-d2" + "st,flexgen-stih418-d2" + "st,flexgen-stih407-d3" - #clock-cells : from common clock binding; shall be set to 1 (multiple clock outputs). diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt index d93d49342e60..c4ba2adb0b4f 100644 --- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt +++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt @@ -12,6 +12,9 @@ This binding uses the common clock binding[1]. Required properties: - compatible : shall be: "st,quadfs" + "st,quadfs-d0" + "st,quadfs-d2" + "st,quadfs-d3" "st,quadfs-pll" diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 6b419a9878f3..9b537bc876b5 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -12,7 +12,9 @@ maintainers: properties: compatible: items: - - const: ti,am654-ehrpwm-tbclk + - enum: + - ti,am654-ehrpwm-tbclk + - ti,am64-epwm-tbclk - const: syscon "#clock-cells": diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml new file mode 100644 index 000000000000..bd8173848253 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml @@ -0,0 +1,209 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for the Texas Instruments LMK04832 + +maintainers: + - Liam Beguin <liambeguin@gmail.com> + +description: | + Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B + support. The LMK04832 is pin compatible with the LMK0482x family. + + Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf + +properties: + compatible: + enum: + - ti,lmk04832 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 1 + + spi-max-frequency: + maximum: 5000000 + + clocks: + items: + - description: PLL2 reference clock. + + clock-names: + items: + - const: oscin + + reset-gpios: + maxItems: 1 + + ti,spi-4wire-rdbk: + description: | + Select SPI 4wire readback pin configuration. + Available readback pins are, + CLKin_SEL0 0 + CLKin_SEL1 1 + RESET 2 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + ti,vco-hz: + description: Optional to set VCO frequency of the PLL in Hertz. + + ti,sysref-ddly: + description: SYSREF digital delay value. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 8 + maximum: 8191 + default: 8 + + ti,sysref-mux: + description: | + SYSREF Mux configuration. + Available options are, + Normal SYNC 0 + Re-clocked 1 + SYSREF Pulser 2 + SYSREF Continuous 3 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 + + ti,sync-mode: + description: SYNC pin configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + + ti,sysref-pulse-count: + description: + Number of SYSREF pulses to send when SYSREF is not in continuous mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 4 + +patternProperties: + "@[0-9a-d]+$": + type: object + description: + Child nodes used to configure output clocks. + + properties: + reg: + description: + clock output identifier. + minimum: 0 + maximum: 13 + + ti,clkout-fmt: + description: + Clock output format. + Available options are, + Powerdown 0x00 + LVDS 0x01 + HSDS 6 mA 0x02 + HSDS 8 mA 0x03 + LVPECL 1600 mV 0x04 + LVPECL 2000 mV 0x05 + LCPECL 0x06 + CML 16 mA 0x07 + CML 24 mA 0x08 + CML 32 mA 0x09 + CMOS (Off/Inverted) 0x0a + CMOS (Normal/Off) 0x0b + CMOS (Inverted/Inverted) 0x0c + CMOS (Inverted/Normal) 0x0d + CMOS (Normal/Inverted) 0x0e + CMOS (Normal/Normal) 0x0f + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + ti,clkout-sysref: + description: + Select SYSREF clock path for output clock. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clocks { + lmk04832_oscin: oscin { + compatible = "fixed-clock"; + + #clock-cells = <0>; + clock-frequency = <122880000>; + clock-output-names = "lmk04832-oscin"; + }; + }; + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + lmk04832: clock-controller@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + compatible = "ti,lmk04832"; + spi-max-frequency = <781250>; + + reset-gpios = <&gpio_lmk 0 0 0>; + + #clock-cells = <1>; + clocks = <&lmk04832_oscin>; + clock-names = "oscin"; + + ti,spi-4wire-rdbk = <0>; + ti,vco-hz = <2457600000>; + + assigned-clocks = + <&lmk04832 0>, <&lmk04832 1>, + <&lmk04832 2>, <&lmk04832 3>, + <&lmk04832 4>, + <&lmk04832 6>, <&lmk04832 7>, + <&lmk04832 10>, <&lmk04832 11>; + assigned-clock-rates = + <122880000>, <384000>, + <122880000>, <384000>, + <122880000>, + <153600000>, <384000>, + <614400000>, <384000>; + + clkout0@0 { + reg = <0>; + ti,clkout-fmt = <0x01>; // LVDS + }; + + clkout1@1 { + reg = <1>; + ti,clkout-fmt = <0x01>; // LVDS + ti,clkout-sysref; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index df57009ff8e7..37a7cb6ad07d 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -42,6 +42,11 @@ Required properties: "idlest" - contains the idle status register base address "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) + "ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains + the frequency spreading register base address (optional) + "ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains + the modulation frequency register base address + (optional) ti,am3-* dpll types do not have autoidle register ti,omap2-* dpll type does not support idlest / autoidle registers @@ -51,6 +56,14 @@ Optional properties: - ti,low-power-stop : DPLL supports low power stop mode, gating output - ti,low-power-bypass : DPLL output matches rate of parent bypass clock - ti,lock : DPLL locks in programmed rate + - ti,min-div : the minimum divisor to start from to round the DPLL + target rate + - ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency + spreading in permille (10th of a percent) + - ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread + spectrum modulation frequency + - ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean + to enable the downspread feature Examples: dpll_core_ck: dpll_core_ck@44e00490 { @@ -83,3 +96,10 @@ Examples: clocks = <&sys_ck>, <&sys_ck>; reg = <0x0500>, <0x0540>; }; + + dpll_disp_ck: dpll_disp_ck { + #clock-cells = <0>; + compatible = "ti,am3-dpll-no-gate-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; + }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 32509b98142e..92b49bc37939 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -149,6 +149,17 @@ properties: maxItems: 6 $ref: /schemas/types.yaml#/definitions/uint32-array + sink-vdos-v1: + description: An array of u32 with each entry, a Vendor Defined Message Object (VDO), + providing additional information corresponding to the product, the detailed bit + definitions and the order of each VDO can be found in + "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover + Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in + dt-bindings/usb/pd.h. + minItems: 3 + maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + op-sink-microwatt: description: Sink required operating power in microwatt, if source can't offer the power, Capability Mismatch is set. Required for power sink and @@ -207,6 +218,10 @@ properties: SNK_READY for non-pd link. type: boolean +dependencies: + sink-vdos-v1: [ 'sink-vdos' ] + sink-vdos: [ 'sink-vdos-v1' ] + required: - compatible diff --git a/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml new file mode 100644 index 000000000000..b633b8d0e6f0 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/cortina,sl3516-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SL3516 cryptographic offloader driver + +maintainers: + - Corentin Labbe <clabbe@baylibre.com> + +properties: + compatible: + enum: + - cortina,sl3516-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + + crypto@62000000 { + compatible = "cortina,sl3516-crypto"; + reg = <0x62000000 0x10000>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_SECURITY>; + clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; + }; diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml new file mode 100644 index 000000000000..9c53c27bd20a --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx cryptographic engine + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE + (Network Processing Engine). Since it is not a device on its own + it is defined as a subnode of the NPE, if crypto support is + available on the platform. + +properties: + compatible: + const: intel,ixp4xx-crypto + + intel,npe-handle: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: phandle to the NPE this crypto engine is using, the cell + describing the NPE instance to be used. + + queue-rx: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: phandle to the RX queue on the NPE, the cell describing + the queue instance to be used. + + queue-txready: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: phandle to the TX READY queue on the NPE, the cell describing + the queue instance to be used. + +required: + - compatible + - intel,npe-handle + - queue-rx + - queue-txready + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml new file mode 100644 index 000000000000..e3379d106728 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 Activity Monitor + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The activity monitor block collects statistics about the behaviour of other + components in the system. This information can be used to derive the rate at + which the external memory needs to be clocked in order to serve all requests + from the monitored clients. + +properties: + compatible: + enum: + - nvidia,tegra30-actmon + - nvidia,tegra114-actmon + - nvidia,tegra124-actmon + - nvidia,tegra210-actmon + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: actmon + - const: emc + + resets: + maxItems: 1 + + reset-names: + items: + - const: actmon + + interrupts: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 12 + + interconnect-names: + minItems: 1 + maxItems: 12 + description: + Should include name of the interconnect path for each interconnect + entry. Consult TRM documentation for information about available + memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, which + is a bitfield indicating SoC speedo ID mask. + + "#cooling-cells": + const: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interconnects + - interconnect-names + - operating-points-v2 + - "#cooling-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra30-mc.h> + + mc: memory-controller@7000f000 { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x400>; + clocks = <&clk 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + + emc: external-memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 57>; + + nvidia,memory-controller = <&mc>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + + #interconnect-cells = <0>; + }; + + actmon@6000c800 { + compatible = "nvidia,tegra30-actmon"; + reg = <0x6000c800 0x400>; + interrupts = <0 45 4>; + clocks = <&clk 119>, <&clk 57>; + clock-names = "actmon", "emc"; + resets = <&rst 119>; + reset-names = "actmon"; + operating-points-v2 = <&dvfs_opp_table>; + interconnects = <&mc TEGRA30_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; + #cooling-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml index d900cc57b4ec..9b24081a0dbd 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: brcm,bcm2835-vec + enum: + - brcm,bcm2711-vec + - brcm,bcm2835-vec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml index 63427878715e..2333fdbe9296 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -18,7 +18,7 @@ properties: reg: minItems: 1 - maxItems: 2 + maxItems: 3 items: - description: Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). @@ -26,13 +26,16 @@ properties: included in the associated PHY. - description: Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + - description: + Register block of mhdptx sapb registers. reg-names: minItems: 1 - maxItems: 2 + maxItems: 3 items: - const: mhdptx - const: j721e-intg + - const: mhdptx-sapb clocks: maxItems: 1 @@ -99,14 +102,18 @@ allOf: properties: reg: minItems: 2 + maxItems: 3 reg-names: minItems: 2 + maxItems: 3 else: properties: reg: - maxItems: 1 + minItems: 1 + maxItems: 2 reg-names: - maxItems: 1 + minItems: 1 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml new file mode 100644 index 000000000000..9f7cc6b757cb --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to + DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip + which is connected to and operated by the ChromeOS Embedded Controller + (See google,cros-ec.yaml). It is accessed using I2C tunneling through + the EC and therefore its node should be a child of an EC I2C tunnel node + (See google,cros-ec-i2c-tunnel.yaml). + +properties: + compatible: + const: google,cros-ec-anx7688 + + reg: + maxItems: 1 + description: I2C address of the device. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: USB Type-c connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c_tunnel_b: i2c-tunnel1 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + anx7688: anx7688@2c { + compatible = "google,cros-ec-anx7688"; + reg = <0x2c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx7688_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + port@1 { + reg = <1>; + anx7688_out: endpoint { + remote-endpoint = <&typec_connector>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml new file mode 100644 index 000000000000..6ec1d5fbb8bc --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it66121 HDMI bridge Device Tree Bindings + +maintainers: + - Phong LE <ple@baylibre.com> + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The IT66121 is a high-performance and low-power single channel HDMI + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible + to DVI 1.0 specifications. + +properties: + compatible: + const: ite,it66121 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + vrf12-supply: + description: Regulator for 1.2V analog core power. + + vcn33-supply: + description: Regulator for 3.3V digital core power. + + vcn18-supply: + description: Regulator for 1.8V IO core power. + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI Connector port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vrf12-supply + - vcn33-supply + - vcn18-supply + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + it66121hdmitx: hdmitx@4c { + compatible = "ite,it66121"; + pinctrl-names = "default"; + pinctrl-0 = <&ite_pins_default>; + vcn33-supply = <&mt6358_vcn33_wifi_reg>; + vcn18-supply = <&mt6358_vcn18_reg>; + vrf12-supply = <&mt6358_vrf12_reg>; + reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&display_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_conn_out: endpoint { + remote-endpoint = <&hdmi_conn_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml new file mode 100644 index 000000000000..d101233ae17f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Texas Instruments SN65DSI83 1x Single-link MIPI DSI + to 1x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi83 + Texas Instruments SN65DSI84 1x Single-link MIPI DSI + to 1x Dual-link or 2x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi84 + +properties: + compatible: + enum: + - ti,sn65dsi83 + - ti,sn65dsi84 + + reg: + enum: + - 0x2c + - 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI Channel-A input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI Channel-B input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - enable-gpios + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: ti,sn65dsi83 + then: + properties: + ports: + properties: + port@1: false + port@3: false + + - if: + properties: + compatible: + contains: + const: ti,sn65dsi84 + then: + properties: + ports: + properties: + port@1: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt deleted file mode 100644 index 82e3bc0b7485..000000000000 --- a/Documentation/devicetree/bindings/display/faraday,tve200.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Faraday TV Encoder TVE200 - -Required properties: - -- compatible: must be one of: - "faraday,tve200" - "cortina,gemini-tvc", "faraday,tve200" - -- reg: base address and size of the control registers block - -- interrupts: contains an interrupt specifier for the interrupt - line from the TVE200 - -- clock-names: should contain "PCLK" for the clock line clocking the - silicon and "TVE" for the 27MHz clock to the video driver - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- resets: contains the reset line phandle for the block - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - This port should have the properties: - reg = <0>; - It should have one endpoint connected to a remote endpoint where - the display is connected. - -Example: - -display-controller@6a000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "faraday,tve200"; - reg = <0x6a000000 0x1000>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; - resets = <&syscon GEMINI_RESET_TVC>; - clocks = <&syscon GEMINI_CLK_GATE_TVC>, - <&syscon GEMINI_CLK_TVC>; - clock-names = "PCLK", "TVE"; - - port@0 { - reg = <0>; - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml new file mode 100644 index 000000000000..e2ee77767321 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/faraday,tve200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday TV Encoder TVE200 + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + oneOf: + - const: faraday,tve200 + - items: + - const: cortina,gemini-tvc + - const: faraday,tve200 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + + clock-names: + items: + - const: PCLK + - const: TVE + + clocks: + minItems: 2 + + resets: + minItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + display-controller@6a000000 { + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml new file mode 100644 index 000000000000..66288b9f0aa6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI CEC Controller Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI CEC controller handles hotplug detection and CEC communication. + +properties: + compatible: + enum: + - mediatek,mt7623-cec + - mediatek,mt8167-cec + - mediatek,mt8173-cec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0x10013000 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml new file mode 100644 index 000000000000..b6fcdfb99ab2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI DDC Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. + +properties: + compatible: + enum: + - mediatek,mt7623-hdmi-ddc + - mediatek,mt8167-hdmi-ddc + - mediatek,mt8173-hdmi-ddc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ddc-i2c + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi_ddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + reg = <0x11012000 0x1c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt deleted file mode 100644 index b284ca51b913..000000000000 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ /dev/null @@ -1,136 +0,0 @@ -Mediatek HDMI Encoder -===================== - -The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from -its parallel input. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi". -- the supported chips are mt2701, mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "pixel", "pll", "bclk", and "spdif". -- phys: phandle link to the HDMI PHY node. - See Documentation/devicetree/bindings/phy/phy-bindings.txt for details. -- phy-names: must contain "hdmi" -- mediatek,syscon-hdmi: phandle link and register offset to the system - configuration registers. For mt8173 this must be offset 0x900 into the - MMSYS_CONFIG region: <&mmsys 0x900>. -- ports: A node containing input and output port nodes with endpoint - definitions as documented in Documentation/devicetree/bindings/graph.txt. -- port@0: The input port in the ports node should be connected to a DPI output - port. -- port@1: The output port in the ports node should be connected to the input - port of a connector node that contains a ddc-i2c-bus property, or to the - input port of an attached bridge chip, such as a SlimPort transmitter. - -HDMI CEC -======== - -The HDMI CEC controller handles hotplug detection and CEC communication. - -Required properties: -- compatible: Should be "mediatek,<chip>-cec" -- the supported chips are mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clock - -HDMI DDC -======== - -The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. -The Mediatek's I2C controller is used to interface with I2C devices. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi-ddc" -- the supported chips are mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- clocks: device clock -- clock-names: Should be "ddc-i2c". - -HDMI PHY -======== -See phy/mediatek,hdmi-phy.yaml - -Example: - -cec: cec@10013000 { - compatible = "mediatek,mt8173-cec"; - reg = <0 0x10013000 0 0xbc>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_CEC>; -}; - -hdmi_phy: hdmi-phy@10209100 { - compatible = "mediatek,mt8173-hdmi-phy"; - reg = <0 0x10209100 0 0x24>; - clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; - clock-names = "pll_ref"; - clock-output-names = "hdmitx_dig_cts"; - mediatek,ibias = <0xa>; - mediatek,ibias_up = <0x1c>; - #clock-cells = <0>; - #phy-cells = <0>; -}; - -hdmi_ddc0: i2c@11012000 { - compatible = "mediatek,mt8173-hdmi-ddc"; - reg = <0 0x11012000 0 0x1c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_I2C5>; - clock-names = "ddc-i2c"; -}; - -hdmi0: hdmi@14025000 { - compatible = "mediatek,mt8173-hdmi"; - reg = <0 0x14025000 0 0x400>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys CLK_MM_HDMI_PIXEL>, - <&mmsys CLK_MM_HDMI_PLLCK>, - <&mmsys CLK_MM_HDMI_AUDIO>, - <&mmsys CLK_MM_HDMI_SPDIF>; - clock-names = "pixel", "pll", "bclk", "spdif"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pin>; - phys = <&hdmi_phy>; - phy-names = "hdmi"; - mediatek,syscon-hdmi = <&mmsys 0x900>; - assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>; - assigned-clock-parents = <&hdmi_phy>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - hdmi0_in: endpoint { - remote-endpoint = <&dpi0_out>; - }; - }; - - port@1 { - reg = <1>; - - hdmi0_out: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; -}; - -connector { - compatible = "hdmi-connector"; - type = "a"; - ddc-i2c-bus = <&hdmiddc0>; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml new file mode 100644 index 000000000000..111967efa999 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI Encoder Device Tree Bindings + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from + its parallel input. + +properties: + compatible: + enum: + - mediatek,mt2701-hdmi + - mediatek,mt7623-hdmi + - mediatek,mt8167-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: HDMI PLL + - description: Bit Clock + - description: S/PDIF Clock + + clock-names: + items: + - const: pixel + - const: pll + - const: bclk + - const: spdif + + phys: + maxItems: 1 + + phy-names: + items: + - const: hdmi + + mediatek,syscon-hdmi: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: | + phandle link and register offset to the system configuration registers. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Input port node. This port should be connected to a DPI output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output port node. This port should be connected to the input port of a connector + node that contains a ddc-i2c-bus property, or to the input port of an attached + bridge chip, such as a SlimPort transmitter. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - mediatek,syscon-hdmi + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi0: hdmi@14025000 { + compatible = "mediatek,mt8173-hdmi"; + reg = <0x14025000 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml new file mode 100644 index 000000000000..64d8d9e5e47a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MSM Display Port Controller + +maintainers: + - Kuogee Hsieh <khsieh@codeaurora.org> + +description: | + Device tree bindings for DisplayPort host controller for MSM targets + that are compatible with VESA DisplayPort interface specification. + +properties: + compatible: + enum: + - qcom,sc7180-dp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: AHB clock to enable register access + - description: Display Port AUX clock + - description: Display Port Link clock + - description: Link interface clock between DP and PHY + - description: Display Port Pixel clock + + clock-names: + items: + - const: core_iface + - const: core_aux + - const: ctrl_link + - const: ctrl_link_iface + - const: stream_pixel + + assigned-clocks: + items: + - description: link clock source + - description: pixel clock source + + assigned-clock-parents: + items: + - description: phy 0 parent + - description: phy 1 parent + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + operating-points-v2: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the controller + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - "#sound-dai-cells" + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/power/qcom-aoss-qmp.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + reg = <0xae90000 0x1400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + + phys = <&dp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + power-domains = <&rpmhpd SC7180_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&typec>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml new file mode 100644 index 000000000000..12a86b1ec1bc --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7180 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SC7180 target. + +properties: + compatible: + items: + - const: qcom,sc7180-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sc7180-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF0 (DP) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml new file mode 100644 index 000000000000..b4ea7c92fb3d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SDM845 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SDM845 target. + +properties: + compatible: + items: + - const: qcom,sdm845-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF2 (DSI2) + + required: + - port@0 + - port@1 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt deleted file mode 100644 index 586e6eac5b08..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ /dev/null @@ -1,141 +0,0 @@ -Qualcomm Technologies, Inc. DPU KMS - -Description: - -Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates -sub-blocks like DPU display controller, DSI and DP interfaces etc. -The DPU display controller is found in SDM845 SoC. - -MDSS: -Required properties: -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" -- reg: physical base address and length of controller's registers. -- reg-names: register region names. The following region is required: - * "mdss" -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required: - * "iface" - * "bus" - * "core" -- interrupts: interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- iommus: phandle of iommu device node. -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. -- interconnects : interconnect path specifier for MDSS according to - Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be - 2 paths corresponding to 2 AXI ports. -- interconnect-names : MDSS will have 2 port names to differentiate between the - 2 interconnect paths defined with interconnect specifier. - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -MDP: -Required properties: -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" -- reg: physical base address and length of controller's registers. -- reg-names : register region names. The following region is required: - * "mdp" - * "vbif" -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required. - * "bus" - * "iface" - * "core" - * "vsync" -- interrupts: interrupt line from DPU to MDSS. -- ports: contains the list of output ports from DPU device. These ports connect - to interfaces that are external to the DPU hardware, such as DSI, DP etc. - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - Port 0 -> DPU_INTF1 (DSI1) - Port 1 -> DPU_INTF2 (DSI2) - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -Example: - - mdss: mdss@ae00000 { - compatible = "qcom,sdm845-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - - power-domains = <&clock_dispcc 0>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>, - <&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>; - - interconnect-names = "mdp0-mem", "mdp1-mem"; - - iommus = <&apps_iommu 0>; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xae00000 0xb2008>; - - mdss_mdp: mdp@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, - <&clock_dispcc DISP_CC_MDSS_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <0 0 300000000 19200000>; - - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml new file mode 100644 index 000000000000..76348b71f736 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI controller + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: "../dsi-controller.yaml#" + +properties: + compatible: + items: + - const: qcom,mdss-dsi-ctrl + + reg: + maxItems: 1 + + reg-names: + const: dsi_ctrl + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Display byte clock + - description: Display byte interface clock + - description: Display pixel clock + - description: Display escape clock + - description: Display AHB clock + - description: Display AXI clock + + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + + phys: + maxItems: 1 + + phy-names: + const: dsi + + "#address-cells": true + + "#size-cells": true + + syscon-sfpb: + description: A phandle to mmss_sfpb syscon node (only for DSIv2). + $ref: "/schemas/types.yaml#/definitions/phandle" + + qcom,dual-dsi-mode: + type: boolean + description: | + Indicates if the DSI controller is driving a panel which needs + 2 DSI links. + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: "/schemas/graph.yaml#/properties/ports" + description: | + Contains DSI controller input and output ports as children, each + containing one endpoint subnode. + + properties: + port@0: + $ref: "/schemas/graph.yaml#/properties/port" + description: | + Input endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [ 0, 1, 2, 3 ] + + port@1: + $ref: "/schemas/graph.yaml#/properties/port" + description: | + Output endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [ 0, 1, 2, 3 ] + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - phys + - phy-names + - power-domains + - operating-points-v2 + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&dsi_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml new file mode 100644 index 000000000000..4a26bef19360 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 10nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-10nm + - const: qcom,dsi-phy-10nm-8998 + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vdds-supply: + description: | + Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and + connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target + +required: + - compatible + - reg + - reg-names + - vdds-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vdda_mipi_dsi0_pll>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml new file mode 100644 index 000000000000..72a00cce0147 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 14nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-14nm + - const: qcom,dsi-phy-14nm-660 + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vcca-supply: + description: Phandle to vcca regulator device node. + +required: + - compatible + - reg + - reg-names + - vcca-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vcca-supply = <&vcca_reg>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml new file mode 100644 index 000000000000..743806d61afe --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 20nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-20nm + + reg: + items: + - description: dsi pll register set + - description: dsi phy register set + - description: dsi phy regulator register set + + reg-names: + items: + - const: dsi_pll + - const: dsi_phy + - const: dsi_phy_regulator + + vcca-supply: + description: Phandle to vcca regulator device node. + + vddio-supply: + description: Phandle to vdd-io regulator device node. + +required: + - compatible + - reg + - reg-names + - vddio-supply + - vcca-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-20nm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vcca-supply = <&vcca_reg>; + vddio-supply = <&vddio_reg>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml new file mode 100644 index 000000000000..b106007116b4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 28nm PHY + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,dsi-phy-28nm-hpm + - const: qcom,dsi-phy-28nm-lp + - const: qcom,dsi-phy-28nm-8960 + + reg: + items: + - description: dsi pll register set + - description: dsi phy register set + - description: dsi phy regulator register set + + reg-names: + items: + - const: dsi_pll + - const: dsi_phy + - const: dsi_phy_regulator + + vddio-supply: + description: Phandle to vdd-io regulator device node. + +required: + - compatible + - reg + - reg-names + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vddio-supply = <&vddio_reg>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml new file mode 100644 index 000000000000..502bdda90235 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Description of Qualcomm Display DSI PHY common dt properties + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + This defines the DSI PHY dt properties which are common for all + dsi phy versions. + +properties: + "#clock-cells": + const: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: Display AHB clock + - description: Board XO source + + clock-names: + items: + - const: iface + - const: ref + +required: + - clocks + - clock-names + - "#clock-cells" + - "#phy-cells" + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt deleted file mode 100644 index b9a64d3ff184..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ /dev/null @@ -1,249 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon DSI output - -DSI Controller: -Required properties: -- compatible: - * "qcom,mdss-dsi-ctrl" -- reg: Physical base address and length of the registers of controller -- reg-names: The names of register regions. The following regions are required: - * "dsi_ctrl" -- interrupts: The interrupt signal from the DSI block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: Phandles to device clocks. -- clock-names: the following clocks are required: - * "mdp_core" - * "iface" - * "bus" - * "core_mmss" - * "byte" - * "pixel" - * "core" - For DSIv2, we need an additional clock: - * "src" - For DSI6G v2.0 onwards, we need also need the clock: - * "byte_intf" -- assigned-clocks: Parents of "byte" and "pixel" for the given platform. -- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided - by a DSI PHY block. See [1] for details on clock bindings. -- vdd-supply: phandle to vdd regulator device node -- vddio-supply: phandle to vdd-io regulator device node -- vdda-supply: phandle to vdda regulator device node -- phys: phandle to DSI PHY device node -- phy-names: the name of the corresponding PHY device -- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) -- ports: Contains 2 DSI controller ports as child nodes. Each port contains - an endpoint subnode as defined in [2] and [3]. - -Optional properties: -- panel@0: Node of panel connected to this DSI controller. - See files in [4] for each supported panel. -- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is - driving a panel which needs 2 DSI links. -- qcom,master-dsi: Boolean value indicating if the DSI controller is driving - the master link of the 2-DSI panel. -- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is - driving a 2-DSI panel whose 2 links need receive command simultaneously. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-n: the "sleep" pinctrl state -- ports: contains DSI controller input and output ports as children, each - containing one endpoint subnode. - - DSI Endpoint properties: - - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's - input endpoint. For port@1, set to the MDP interface output. See [2] for - device graph info. - - - data-lanes: this describes how the physical DSI data lanes are mapped - to the logical lanes on the given platform. The value contained in - index n describes what physical lane is mapped to the logical lane n - (DATAn, where n lies between 0 and 3). The clock lane position is fixed - and can't be changed. Hence, they aren't a part of the DT bindings. See - [3] for more info on the data-lanes property. - - For example: - - data-lanes = <3 0 1 2>; - - The above mapping describes that the logical data lane DATA0 is mapped to - the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2 - to phys DATA1 and logic DATA3 to phys DATA2. - - There are only a limited number of physical to logical mappings possible: - <0 1 2 3> - <1 2 3 0> - <2 3 0 1> - <3 0 1 2> - <0 3 2 1> - <1 0 3 2> - <2 1 0 3> - <3 2 1 0> - -DSI PHY: -Required properties: -- compatible: Could be the following - * "qcom,dsi-phy-28nm-hpm" - * "qcom,dsi-phy-28nm-lp" - * "qcom,dsi-phy-20nm" - * "qcom,dsi-phy-28nm-8960" - * "qcom,dsi-phy-14nm" - * "qcom,dsi-phy-14nm-660" - * "qcom,dsi-phy-10nm" - * "qcom,dsi-phy-10nm-8998" - * "qcom,dsi-phy-7nm" - * "qcom,dsi-phy-7nm-8150" -- reg: Physical base address and length of the registers of PLL, PHY. Some - revisions require the PHY regulator base address, whereas others require the - PHY lane base address. See below for each PHY revision. -- reg-names: The names of register regions. The following regions are required: - For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY: - * "dsi_pll" - * "dsi_phy" - * "dsi_phy_regulator" - For DSI 14nm, 10nm and 7nm PHYs: - * "dsi_pll" - * "dsi_phy" - * "dsi_phy_lane" -- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating - 2 clocks: A byte clock (index 0), and a pixel clock (index 1). -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: Phandles to device clocks. See [1] for details on clock bindings. -- clock-names: the following clocks are required: - * "iface" - * "ref" (only required for new DTS files/entries) - For 28nm HPM/LP, 28nm 8960 PHYs: -- vddio-supply: phandle to vdd-io regulator device node - For 20nm PHY: -- vddio-supply: phandle to vdd-io regulator device node -- vcca-supply: phandle to vcca regulator device node - For 14nm PHY: -- vcca-supply: phandle to vcca regulator device node - For 10nm and 7nm PHY: -- vdds-supply: phandle to vdds regulator device node - -Optional properties: -- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY - regulator is wanted. -- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode - panels in microseconds. Driver uses this number to adjust - the clock rate according to the expected transfer time. - Increasing this value would slow down the mdp processing - and can result in slower performance. - Decreasing this value can speed up the mdp processing, - but this can also impact power consumption. - As a rule this time should not be higher than the time - that would be expected with the processing at the - dsi link rate since anyways this would be the maximum - transfer time that could be achieved. - If ping pong split is enabled, this time should not be higher - than two times the dsi link rate time. - If the property is not specified, then the default value is 14000 us. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/graph.txt -[3] Documentation/devicetree/bindings/media/video-interfaces.txt -[4] Documentation/devicetree/bindings/display/panel/ - -Example: - dsi0: dsi@fd922800 { - compatible = "qcom,mdss-dsi-ctrl"; - qcom,dsi-host-index = <0>; - interrupt-parent = <&mdp>; - interrupts = <4 0>; - reg-names = "dsi_ctrl"; - reg = <0xfd922800 0x200>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "bus", - "byte", - "core", - "core_mmss", - "iface", - "mdp_core", - "pixel"; - clocks = - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_PCLK0_CLK>; - - assigned-clocks = - <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = - <&dsi_phy0 0>, - <&dsi_phy0 1>; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - phys = <&dsi_phy0>; - phy-names ="dsi-phy"; - - qcom,dual-dsi-mode; - qcom,master-dsi; - qcom,sync-dual-dsi; - - qcom,mdss-mdp-transfer-time-us = <12000>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dsi_active>; - pinctrl-1 = <&dsi_suspend>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi_phy0: dsi-phy@fd922a00 { - compatible = "qcom,dsi-phy-28nm-hpm"; - qcom,dsi-phy-index = <0>; - reg-names = - "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; - reg = <0xfd922a00 0xd4>, - <0xfd922b00 0x2b0>, - <0xfd922d80 0x7b>; - clock-names = "iface"; - clocks = <&mmcc MDSS_AHB_CLK>; - #clock-cells = <1>; - vddio-supply = <&pma8084_l12>; - - qcom,dsi-phy-regulator-ldo-mode; - }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml new file mode 100644 index 000000000000..4cb75a5f2e3a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LMS397KF04 display panel + +description: The datasheet claims this is based around a display controller + named DB7430 with a separate backlight controller. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,lms397kf04 + + reg: true + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: inherited as a SPI client node, the datasheet specifies + maximum 300 ns minimum cycle which gives around 3 MHz max frequency + maximum: 3000000 + + port: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,lms397kf04"; + spi-max-frequency = <3000000>; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + backlight = <&ktd259>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 1bd2870c3a9c..c435c9f369a4 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -26,9 +26,16 @@ properties: reg: items: - - description: NPE0 register range - - description: NPE1 register range - - description: NPE2 register range + - description: NPE0 (NPE-A) register range + - description: NPE1 (NPE-B) register range + - description: NPE2 (NPE-C) register range + + crypto: + $ref: /schemas/crypto/intel,ixp4xx-crypto.yaml# + type: object + description: Optional node for the embedded crypto engine, the node + should be named with the instance number of the NPE engine used for + the crypto engine. required: - compatible @@ -38,8 +45,15 @@ additionalProperties: false examples: - | - npe@c8006000 { + npe: npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + + crypto { + compatible = "intel,ixp4xx-crypto"; + intel,npe-handle = <&npe 2>; + queue-rx = <&qmgr 30>; + queue-txready = <&qmgr 29>; + }; }; ... diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 894ba217ab32..0f73f436bea7 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -17,6 +17,7 @@ properties: items: - enum: - amlogic,meson-g12a-mali + - mediatek,mt8183-mali - realtek,rtd1619-mali - rockchip,px30-mali - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable @@ -41,10 +42,13 @@ properties: mali-supply: true + sram-supply: true + operating-points-v2: true power-domains: - maxItems: 1 + minItems: 1 + maxItems: 3 resets: maxItems: 2 @@ -89,6 +93,30 @@ allOf: then: required: - resets + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mali + then: + properties: + power-domains: + minItems: 3 + power-domain-names: + items: + - const: core0 + - const: core1 + - const: core2 + + required: + - sram-supply + - power-domains + - power-domain-names + else: + properties: + power-domains: + maxItems: 1 + sram-supply: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index 96eed5cc7841..72980d083c21 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -30,6 +30,7 @@ properties: - st,stds75 - st,stlm75 - microchip,tcn75 + - ti,tmp1075 - ti,tmp100 - ti,tmp101 - ti,tmp105 diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml index 33ee575bb09d..926be9a29044 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml @@ -49,7 +49,7 @@ examples: #size-cells = <0>; adc@48 { - comatible = "ti,ads7828"; + compatible = "ti,ads7828"; reg = <0x48>; vref-supply = <&vref>; ti,differential-input; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml index 7b553d559c83..98c6fcf7bf26 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -46,6 +46,13 @@ properties: description: | I2C bus timeout in microseconds + fsl,i2c-erratum-a004447: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicates the presence of QorIQ erratum A-004447, which + says that the standard i2c recovery scheme mechanism does + not work and an alternate implementation is needed. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 6f2398cdc82d..1e7894e524f9 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,7 +102,6 @@ patternProperties: st,adc-channel-names: description: List of single-ended channel names. - $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 74244d21d2b3..d41d8743aad4 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -38,6 +38,5 @@ properties: Duration in seconds which the key should be kept pressed for device to reset automatically. Device with key pressed reset feature can specify this property. - $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index cb6498108b78..36c955965d90 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -92,7 +92,6 @@ properties: this interconnect to send RPMh commands. qcom,bcm-voter-names: - $ref: /schemas/types.yaml#/definitions/string-array description: | Names for each of the qcom,bcm-voters specified. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 1ecd1831cf02..c84f9fe7f254 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -145,6 +145,19 @@ properties: required: - affinity + clocks: + maxItems: 1 + + clock-names: + items: + - const: aclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index b67b8cbd33fc..abb22db3bb28 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -29,6 +29,7 @@ properties: - renesas,intc-ex-r8a774c0 # RZ/G2E - renesas,intc-ex-r8a7795 # R-Car H3 - renesas,intc-ex-r8a7796 # R-Car M3-W + - renesas,intc-ex-r8a77961 # R-Car M3-W+ - renesas,intc-ex-r8a77965 # R-Car M3-N - renesas,intc-ex-r8a77970 # R-Car V3M - renesas,intc-ex-r8a77980 # R-Car V3H diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml new file mode 100644 index 000000000000..4ff6fabfcb30 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED BMC KCS Devices + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + +description: | + The Aspeed BMC SoCs typically use the Keyboard-Controller-Style (KCS) + interfaces on the LPC bus for in-band IPMI communication with their host. + +properties: + compatible: + oneOf: + - description: Channel ID derived from reg + items: + enum: + - aspeed,ast2400-kcs-bmc-v2 + - aspeed,ast2500-kcs-bmc-v2 + - aspeed,ast2600-kcs-bmc + + - description: Old-style with explicit channel ID, no reg + deprecated: true + items: + enum: + - aspeed,ast2400-kcs-bmc + - aspeed,ast2500-kcs-bmc + + interrupts: + maxItems: 1 + + reg: + # maxItems: 3 + items: + - description: IDR register + - description: ODR register + - description: STR register + + aspeed,lpc-io-reg: + $ref: '/schemas/types.yaml#/definitions/uint32-array' + minItems: 1 + maxItems: 2 + description: | + The host CPU LPC IO data and status addresses for the device. For most + channels the status address is derived from the data address, but the + status address may be optionally provided. + + aspeed,lpc-interrupts: + $ref: "/schemas/types.yaml#/definitions/uint32-array" + minItems: 2 + maxItems: 2 + description: | + A 2-cell property expressing the LPC SerIRQ number and the interrupt + level/sense encoding (specified in the standard fashion). + + Note that the generated interrupt is issued from the BMC to the host, and + thus the target interrupt controller is not captured by the BMC's + devicetree. + + kcs_chan: + deprecated: true + $ref: '/schemas/types.yaml#/definitions/uint32' + description: The LPC channel number in the controller + + kcs_addr: + deprecated: true + $ref: '/schemas/types.yaml#/definitions/uint32' + description: The host CPU IO map address + +required: + - compatible + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - aspeed,ast2400-kcs-bmc + - aspeed,ast2500-kcs-bmc + then: + required: + - kcs_chan + - kcs_addr + else: + required: + - reg + - aspeed,lpc-io-reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + kcs3: kcs@24 { + compatible = "aspeed,ast2600-kcs-bmc"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupts = <8>; + }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt deleted file mode 100644 index 193e71ca96b0..000000000000 --- a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt +++ /dev/null @@ -1,33 +0,0 @@ -# Aspeed KCS (Keyboard Controller Style) IPMI interface - -The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs -(Baseboard Management Controllers) and the KCS interface can be -used to perform in-band IPMI communication with their host. - -## v1 -Required properties: -- compatible : should be one of - "aspeed,ast2400-kcs-bmc" - "aspeed,ast2500-kcs-bmc" -- interrupts : interrupt generated by the controller -- kcs_chan : The LPC channel number in the controller -- kcs_addr : The host CPU IO map address - -## v2 -Required properties: -- compatible : should be one of - "aspeed,ast2400-kcs-bmc-v2" - "aspeed,ast2500-kcs-bmc-v2" -- reg : The address and size of the IDR, ODR and STR registers -- interrupts : interrupt generated by the controller -- aspeed,lpc-io-reg : The host CPU LPC IO address for the device - -Example: - - kcs3: kcs@24 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; - aspeed,lpc-reg = <0xca2>; - interrupts = <8>; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt index ccebce597f37..a555d94084b7 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt @@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. In these SoCs it's possible to control LEDs both as GPIOs or by hardware. However, on some devices there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or -by hardware using this driver. +as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), +or by hardware using this driver. Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and exporting the 74x164 as spi-gpio prevents those LEDs to be hardware controlled, so the only chance to keep them working is by using this driver. diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt index da5708e7b43b..6e51c6b91ee5 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller This controller is present on BCM6358 and BCM6368. In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 as spi-gpio. -See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware using this driver. Required properties: diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 1a3dff277e2b..675ad9de15bb 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -26,6 +26,7 @@ properties: oneOf: - const: fsl,imx6sx-mu - const: fsl,imx7ulp-mu + - const: fsl,imx8ulp-mu - const: fsl,imx8-mu-scu - items: - enum: diff --git a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml new file mode 100644 index 000000000000..bbb173ea483c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +properties: + compatible: + const: microchip,polarfire-soc-mailbox + + reg: + items: + - description: mailbox data registers + - description: mailbox interrupt registers + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + mbox: mailbox@37020000 { + compatible = "microchip,polarfire-soc-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>; + interrupt-parent = <&L1>; + interrupts = <96>; + #mbox-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 5dc1173d03fd..8878ec00820e 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -19,6 +19,7 @@ properties: - qcom,ipq6018-apcs-apps-global - qcom,ipq8074-apcs-apps-global - qcom,msm8916-apcs-kpss-global + - qcom,msm8939-apcs-kpss-global - qcom,msm8994-apcs-kpss-global - qcom,msm8996-apcs-hmss-global - qcom,msm8998-apcs-hmss-global @@ -27,6 +28,7 @@ properties: - qcom,sc8180x-apss-shared - qcom,sdm660-apcs-hmss-global - qcom,sdm845-apss-shared + - qcom,sm6125-apcs-hmss-global - qcom,sm8150-apss-shared reg: @@ -75,6 +77,7 @@ allOf: - qcom,sc7180-apss-shared - qcom,sdm660-apcs-hmss-global - qcom,sdm845-apss-shared + - qcom,sm6125-apcs-hmss-global - qcom,sm8150-apss-shared then: properties: diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml new file mode 100644 index 000000000000..3e4bb8892d94 --- /dev/null +++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2016-2021 Microchip Technology, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/atmel,isc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Image Sensor Controller (ISC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: | + The Image Sensor Controller (ISC) device provides the video input capabilities for the + Atmel/Microchip AT91 SAMA family of devices. + + The ISC has a single parallel input that supports RAW Bayer, RGB or YUV video, + with both external synchronization and BT.656 synchronization for the latter. + +properties: + compatible: + const: atmel,sama5d2-isc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: hclock + - const: iscck + - const: gck + + '#clock-cells': + const: 0 + + clock-output-names: + const: isc-mck + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, single endpoint describing the input pad. + + properties: + endpoint: + $ref: video-interfaces.yaml# + + properties: + remote-endpoint: true + + bus-width: + enum: [8, 9, 10, 11, 12] + default: 12 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - clock-output-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + isc: isc@f0008000 { + compatible = "atmel,sama5d2-isc"; + reg = <0xf0008000 0x4000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clock-names = "hclock", "iscck", "gck"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + + port { + isc_0: endpoint { + remote-endpoint = <&ov7740_0>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + bus-width = <8>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt deleted file mode 100644 index bbe0e87c6188..000000000000 --- a/Documentation/devicetree/bindings/media/atmel-isc.txt +++ /dev/null @@ -1,65 +0,0 @@ -Atmel Image Sensor Controller (ISC) ----------------------------------------------- - -Required properties for ISC: -- compatible - Must be "atmel,sama5d2-isc". -- reg - Physical base address and length of the registers set for the device. -- interrupts - Should contain IRQ line for the ISC. -- clocks - List of clock specifiers, corresponding to entries in - the clock-names property; - Please refer to clock-bindings.txt. -- clock-names - Required elements: "hclock", "iscck", "gck". -- #clock-cells - Should be 0. -- clock-output-names - Should be "isc-mck". -- pinctrl-names, pinctrl-0 - Please refer to pinctrl-bindings.txt. - -ISC supports a single port node with parallel bus. It should contain one -'port' child node with child 'endpoint' node. Please refer to the bindings -defined in Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -isc: isc@f0008000 { - compatible = "atmel,sama5d2-isc"; - reg = <0xf0008000 0x4000>; - interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; - clock-names = "hclock", "iscck", "gck"; - #clock-cells = <0>; - clock-output-names = "isc-mck"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; - - port { - isc_0: endpoint { - remote-endpoint = <&ov7740_0>; - hsync-active = <1>; - vsync-active = <0>; - pclk-sample = <1>; - }; - }; -}; - -i2c1: i2c@fc028000 { - ov7740: camera@21 { - compatible = "ovti,ov7740"; - reg = <0x21>; - clocks = <&isc>; - clock-names = "xvclk"; - assigned-clocks = <&isc>; - assigned-clock-rates = <24000000>; - - port { - ov7740_0: endpoint { - remote-endpoint = <&isc_0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml new file mode 100644 index 000000000000..f50e54a722eb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/rda,rda5807.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Communications RDA5807 FM radio receiver + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + enum: + - rda,rda5807 + + reg: + description: I2C address. + maxItems: 1 + + power-supply: true + + rda,lnan: + description: Use LNAN input port. + type: boolean + + rda,lnap: + description: Use LNAP input port. + type: boolean + + rda,analog-out: + description: Enable analog audio output. + type: boolean + + rda,i2s-out: + description: Enable I2S digital audio output. + type: boolean + + rda,lna-microamp: + description: LNA working current, in micro-amperes. + default: 2500 + enum: [1800, 2100, 2500, 3000] + +required: + - compatible + - reg + - power-supply + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + radio@11 { + compatible = "rda,rda5807"; + reg = <0x11>; + + power-supply = <&ldo6>; + + rda,lnan; + rda,lnap; + rda,analog-out; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 06db6837cefd..ad1321e5a22d 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -9,6 +9,7 @@ Required properties: "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder. "mediatek,mt8183-vcodec-enc" for MT8183 encoder. "mediatek,mt8173-vcodec-dec" for MT8173 decoder. + "mediatek,mt8192-vcodec-enc" for MT8192 encoder. - reg : Physical base address of the video codec registers and length of memory mapped region. - interrupts : interrupt number to the cpu. @@ -22,6 +23,7 @@ Required properties: - iommus : should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. +- dma-ranges : describes the dma address range space that the codec hw access. One of the two following nodes: - mediatek,vpu : the node of the video processor unit, if using VPU. - mediatek,scp : the node of the SCP unit, if using SCP. diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml new file mode 100644 index 000000000000..4b77103ca913 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs + +maintainers: + - Emil Velikov <emil.velikov@collabora.com> + +description: + Hantro G1 video decode accelerator present on Microchip SAMA5D4 SoCs. + +properties: + compatible: + const: microchip,sama5d4-vdec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + vdec0: vdec@300000 { + compatible = "microchip,sama5d4-vdec"; + reg = <0x00300000 0x100000>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + }; diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml new file mode 100644 index 000000000000..41afe2e5f133 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Microchip Technology, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,xisc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip eXtended Image Sensor Controller (XISC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: | + The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the + Microchip AT91 SAM family of devices. + + The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video. + The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a + parallel sensor. + + The XISC provides one clock output that is used to clock the demuxer/bridge. + +properties: + compatible: + const: microchip,sama7g5-isc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: hclock + + '#clock-cells': + const: 0 + + clock-output-names: + const: isc-mck + + microchip,mipi-mode: + type: boolean + description: + As the XISC is usually connected to a demux/bridge, the XISC receives + the same type of input, however, it should be aware of the type of + signals received. The mipi-mode enables different internal handling + of the data and clock lines. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, single endpoint describing the input pad. + + properties: + endpoint: + $ref: video-interfaces.yaml# + + properties: + bus-type: + enum: [5, 6] + + remote-endpoint: true + + bus-width: + enum: [8, 9, 10, 11, 12] + default: 12 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + required: + - remote-endpoint + - bus-type + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - clock-output-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + xisc: xisc@e1408000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xe1408000 0x2000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + + port { + xisc_in: endpoint { + bus-type = <5>; /* Parallel */ + remote-endpoint = <&csi2dc_out>; + hsync-active = <1>; + vsync-active = <1>; + bus-width = <12>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml index d8ed480482b9..7c09eec78ce5 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -4,15 +4,17 @@ $id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP i.MX7 MIPI CSI-2 receiver +title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver maintainers: - Rui Miguel Silva <rmfrfs@gmail.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> description: |- - The NXP i.MX7 SoC family includes a MIPI CSI-2 receiver IP core, documented - as "CSIS V3.3". The IP core seems to originate from Samsung, and may be - compatible with some of the Exynos4 ad S5P SoCs. + The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2 + receiver IP core named CSIS. The IP core originates from Samsung, and may be + compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version + 3.3, and i.MX8 SoCs use CSIS version 3.6.3. While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is completely wrapped by the CSIS and doesn't expose a control interface of its @@ -20,7 +22,9 @@ description: |- properties: compatible: - const: fsl,imx7-mipi-csi2 + enum: + - fsl,imx7-mipi-csi2 + - fsl,imx8mm-mipi-csi2 reg: maxItems: 1 @@ -29,16 +33,20 @@ properties: maxItems: 1 clocks: + minItems: 3 items: - description: The peripheral clock (a.k.a. APB clock) - description: The external clock (optionally used as the pixel clock) - description: The MIPI D-PHY clock + - description: The AXI clock clock-names: + minItems: 3 items: - const: pclk - const: wrap - const: phy + - const: axi power-domains: maxItems: 1 @@ -71,16 +79,30 @@ properties: properties: data-lanes: - oneOf: - - items: - - const: 1 - - items: - - const: 1 - - const: 2 + items: + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 required: - data-lanes + allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx7-mipi-csi2 + then: + properties: + data-lanes: + items: + maxItems: 2 + port@1: $ref: /schemas/graph.yaml#/properties/port description: @@ -93,12 +115,29 @@ required: - clocks - clock-names - power-domains - - phy-supply - - resets - ports additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx7-mipi-csi2 + then: + required: + - phy-supply + - resets + else: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + phy-supply: false + resets: false + examples: - | #include <dt-bindings/clock/imx7d-clock.h> @@ -106,7 +145,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/reset/imx7-reset.h> - mipi_csi: mipi-csi@30750000 { + mipi-csi@30750000 { compatible = "fsl,imx7-mipi-csi2"; reg = <0x30750000 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; @@ -144,4 +183,46 @@ examples: }; }; + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&mipi_pd>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx477_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index af9e7e59e5a1..d4c541c4b164 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -45,6 +45,7 @@ properties: - rc-cec - rc-cinergy - rc-cinergy-1400 + - rc-ct-90405 - rc-d680-dmb - rc-delock-61959 - rc-dib0700-nec @@ -125,7 +126,6 @@ properties: - rc-snapstream-firefly - rc-streamzap - rc-su3000 - - rc-tango - rc-tanix-tx3mini - rc-tanix-tx5max - rc-tbs-nec diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index 20396f1be999..23703b767f5b 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -25,6 +25,7 @@ properties: - renesas,r8a774e1-csi2 # RZ/G2H - renesas,r8a7795-csi2 # R-Car H3 - renesas,r8a7796-csi2 # R-Car M3-W + - renesas,r8a77961-csi2 # R-Car M3-W+ - renesas,r8a77965-csi2 # R-Car M3-N - renesas,r8a77970-csi2 # R-Car V3M - renesas,r8a77980-csi2 # R-Car V3H diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index f1bdaeab4053..9cd56ff2c316 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -67,9 +67,7 @@ properties: maxItems: 1 clock-names: - maxItems: 1 - items: - - const: fck + const: fck resets: maxItems: 1 @@ -99,32 +97,26 @@ properties: Indicates that the channel acts as primary among the bonded channels. port: - type: object + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false description: - Child port node corresponding to the data input, in accordance with the - video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - The port node must contain at least one endpoint. + Child port node corresponding to the data input. The port node must + contain at least one endpoint. properties: endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: - remote-endpoint: - description: - A phandle to the remote tuner endpoint subnode in remote node - port. - sync-active: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] description: Indicates sync signal polarity, 0/1 for low/high respectively. This property maps to SYNCAC bit in the hardware manual. The default is 1 (active high). - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml new file mode 100644 index 000000000000..514857d36f6b --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2021 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,isp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car ISP Channel Selector + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The R-Car ISP Channel Selector provides MIPI CSI-2 VC and DT filtering + capabilities for the Renesas R-Car family of devices. It is used in + conjunction with the R-Car VIN and CSI-2 modules, which provides the video + capture capabilities. + +properties: + compatible: + items: + - enum: + - renesas,r8a779a0-isp # V3U + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, multiple endpoints describing the connected R-Car + CSI-2 receivers. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 0. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 1. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 2. + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 3. + + port@5: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 4. + + port@6: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 5. + + port@7: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 6. + + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 7. + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + - port@6 + - port@7 + - port@8 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + isp1: isp@fed20000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0xfed20000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 613>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index dd1a5ce5896c..39bb6db2fb32 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -46,11 +46,13 @@ properties: - renesas,vin-r8a7779 # R-Car H1 - renesas,vin-r8a7795 # R-Car H3 - renesas,vin-r8a7796 # R-Car M3-W + - renesas,vin-r8a77961 # R-Car M3-W+ - renesas,vin-r8a77965 # R-Car M3-N - renesas,vin-r8a77970 # R-Car V3M - renesas,vin-r8a77980 # R-Car V3H - renesas,vin-r8a77990 # R-Car E3 - renesas,vin-r8a77995 # R-Car D3 + - renesas,vin-r8a779a0 # R-Car V3U reg: maxItems: 1 @@ -111,7 +113,7 @@ properties: description: VIN channel number $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 - maximum: 15 + maximum: 31 ports: $ref: /schemas/graph.yaml#/properties/ports @@ -187,6 +189,29 @@ properties: - required: - endpoint@3 + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, multiple endpoints describing all the R-Car ISP + modules connected the VIN. + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP0. + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP1. + + endpoint@2: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP2. + + endpoint@3: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP3. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml index 8d35c327018b..089f11d21b25 100644 --- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -15,7 +15,11 @@ description: |- properties: compatible: - const: rockchip,rk3399-vdec + oneOf: + - const: rockchip,rk3399-vdec + - items: + - const: rockchip,rk3228-vdec + - const: rockchip,rk3399-vdec reg: maxItems: 1 @@ -37,6 +41,10 @@ properties: - const: cabac - const: core + assigned-clocks: true + + assigned-clock-rates: true + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index c81dbc3e8960..b88172a59de7 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -15,10 +15,19 @@ description: properties: compatible: - enum: - - rockchip,rk3288-vpu - - rockchip,rk3328-vpu - - rockchip,rk3399-vpu + oneOf: + - enum: + - rockchip,rk3036-vpu + - rockchip,rk3066-vpu + - rockchip,rk3288-vpu + - rockchip,rk3328-vpu + - rockchip,rk3399-vpu + - items: + - const: rockchip,rk3188-vpu + - const: rockchip,rk3066-vpu + - items: + - const: rockchip,rk3228-vpu + - const: rockchip,rk3399-vpu reg: maxItems: 1 @@ -35,12 +44,20 @@ properties: - const: vdpu clocks: - maxItems: 2 + oneOf: + - maxItems: 2 + - maxItems: 4 clock-names: - items: - - const: aclk - - const: hclk + oneOf: + - items: + - const: aclk + - const: hclk + - items: + - const: aclk_vdpu + - const: hclk_vdpu + - const: aclk_vepu + - const: hclk_vepu power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt deleted file mode 100644 index a9f00c2bf897..000000000000 --- a/Documentation/devicetree/bindings/media/tango-ir.txt +++ /dev/null @@ -1,21 +0,0 @@ -Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) - -Required properties: - -- compatible: "sigma,smp8642-ir" -- reg: address/size of NEC+RC5 area, address/size of RC6 area -- interrupts: spec for IR IRQ -- clocks: spec for IR clock (typically the crystal oscillator) - -Optional properties: - -- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt - -Example: - - ir@10518 { - compatible = "sigma,smp8642-ir"; - reg = <0x10518 0x18>, <0x105e0 0x1c>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - }; diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 2661775a3825..99a84b69a29f 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -21,6 +21,7 @@ Required properties: compatible: "mediatek,mt6323" for PMIC MT6323 "mediatek,mt6358" for PMIC MT6358 + "mediatek,mt6359" for PMIC MT6359 "mediatek,mt6397" for PMIC MT6397 Optional subnodes: diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml index 6f569fbfa134..2f63f2cdeb71 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml @@ -21,6 +21,7 @@ properties: - brcm,bcm2711-emmc2 - brcm,sdhci-iproc-cygnus - brcm,sdhci-iproc + - brcm,bcm7211a0-sdhci reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml index 04ba8b7fc054..546480f41141 100644 --- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml @@ -19,6 +19,7 @@ properties: - ingenic,jz4740-mmc - ingenic,jz4725b-mmc - ingenic,jz4760-mmc + - ingenic,jz4775-mmc - ingenic,jz4780-mmc - ingenic,x1000-mmc - items: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index e141330c1114..25ac8e200970 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -220,6 +220,11 @@ properties: description: eMMC HS400 enhanced strobe mode is supported + no-mmc-hs400: + $ref: /schemas/types.yaml#/definitions/flag + description: + All eMMC HS400 modes are not supported. + dsr: description: Value the card Driver Stage Register (DSR) should be programmed @@ -358,22 +363,6 @@ additionalProperties: true examples: - | - mmc@ab000000 { - compatible = "sdhci"; - reg = <0xab000000 0x200>; - interrupts = <23>; - bus-width = <4>; - cd-gpios = <&gpio 69 0>; - cd-inverted; - wp-gpios = <&gpio 70 0>; - max-frequency = <50000000>; - keep-power-in-suspend; - wakeup-source; - mmc-pwrseq = <&sdhci0_pwrseq>; - clk-phase-sd-hs = <63>, <72>; - }; - - - | mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; @@ -385,9 +374,9 @@ examples: non-removable; mmc-pwrseq = <&sdhci0_pwrseq>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; - compatible = "brcm,bcm43xx-fmac"; + compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; interrupts = <10 8>; interrupt-names = "host-wake"; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt deleted file mode 100644 index 291532ac0446..000000000000 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Renesas Multi Media Card Interface (MMCIF) Controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the MMCIF device. - - -Required properties: - -- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a - fallback. Examples with <soctype> are: - - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs - - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs - - "renesas,mmcif-r8a7742" for the MMCIF found in r8a7742 SoCs - - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs - - "renesas,mmcif-r8a7744" for the MMCIF found in r8a7744 SoCs - - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs - - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs - - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs - - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs - - "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs - - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs - - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs - -- interrupts: Some SoCs have only 1 shared interrupt, while others have either - 2 or 3 individual interrupts (error, int, card detect). Below is the number - of interrupts for each SoC: - 1: r8a73a4, r8a7742, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791, - r8a7793, r8a7794 - 2: r8a7740, sh73a0 - 3: r7s72100 - -- clocks: reference to the functional clock - -- dmas: reference to the DMA channels, one per channel name listed in the - dma-names property. -- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the - receive DMA channel. -- max-frequency: Maximum operating clock frequency, driver uses default clock - frequency if it is not set. - - -Example: R8A7790 (R-Car H2) MMCIF0 - - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; - max-frequency = <97500000>; - }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml new file mode 100644 index 000000000000..c36ba561c387 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/renesas,mmcif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Multi Media Card Interface (MMCIF) Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: "mmc-controller.yaml" + +properties: + compatible: + items: + - enum: + - renesas,mmcif-r7s72100 # RZ/A1H + - renesas,mmcif-r8a73a4 # R-Mobile APE6 + - renesas,mmcif-r8a7740 # R-Mobile A1 + - renesas,mmcif-r8a7742 # RZ/G1H + - renesas,mmcif-r8a7743 # RZ/G1M + - renesas,mmcif-r8a7744 # RZ/G1N + - renesas,mmcif-r8a7745 # RZ/G1E + - renesas,mmcif-r8a7778 # R-Car M1A + - renesas,mmcif-r8a7790 # R-Car H2 + - renesas,mmcif-r8a7791 # R-Car M2-W + - renesas,mmcif-r8a7793 # R-Car M2-N + - renesas,mmcif-r8a7794 # R-Car E2 + - renesas,mmcif-sh73a0 # SH-Mobile AG5 + - const: renesas,sh-mmcif + + reg: + maxItems: 1 + + interrupts: true + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 4 + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + + max-frequency: true + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + +if: + properties: + compatible: + contains: + const: renesas,mmcif-r7s72100 +then: + properties: + interrupts: + items: + - description: Error interrupt + - description: Normal operation interrupt + - description: Card detection interrupt +else: + if: + properties: + compatible: + contains: + enum: + - renesas,mmcif-r8a7740 + - renesas,mmcif-sh73a0 + then: + properties: + interrupts: + items: + - description: Error interrupt + - description: Normal operation interrupt + else: + if: + properties: + compatible: + contains: + enum: + - renesas,mmcif-r8a73a4 + - renesas,mmcif-r8a7778 + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: + maxItems: 1 + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; + reg = <0xee200000 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + }; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 3762f1c8de96..54fb59820d2b 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -29,21 +29,15 @@ properties: - const: rockchip,rk3288-dw-mshc - items: - enum: - # for Rockchip PX30 - rockchip,px30-dw-mshc - # for Rockchip RK3036 + - rockchip,rk1808-dw-mshc - rockchip,rk3036-dw-mshc - # for Rockchip RK322x - rockchip,rk3228-dw-mshc - # for Rockchip RK3308 - rockchip,rk3308-dw-mshc - # for Rockchip RK3328 - rockchip,rk3328-dw-mshc - # for Rockchip RK3368 - rockchip,rk3368-dw-mshc - # for Rockchip RK3399 - rockchip,rk3399-dw-mshc - # for Rockchip RV1108 + - rockchip,rk3568-dw-mshc - rockchip,rv1108-dw-mshc - const: rockchip,rk3288-dw-mshc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 3a79e39253d2..29399e88ac53 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -19,7 +19,6 @@ properties: - const: ti,am654-sdhci-5.1 - const: ti,j721e-sdhci-8bit - const: ti,j721e-sdhci-4bit - - const: ti,j721e-sdhci-4bit - const: ti,am64-sdhci-8bit - const: ti,am64-sdhci-4bit - items: diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt deleted file mode 100644 index 8ba9ed11d716..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Broadcom iProc MDIO bus controller - -Required properties: -- compatible: should be "brcm,iproc-mdio" -- reg: address and length of the register set for the MDIO interface -- #size-cells: must be 1 -- #address-cells: must be 0 - -Child nodes of this MDIO bus controller node are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - -mdio@18002000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; - - enet-gphy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml new file mode 100644 index 000000000000..3031395f7e6e --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc MDIO bus controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: brcm,iproc-mdio + + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt deleted file mode 100644 index 90ac4fef23f5..000000000000 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ /dev/null @@ -1,80 +0,0 @@ -Renesas R-Car CAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible: "renesas,can-r8a7742" if CAN controller is a part of R8A7742 SoC. - "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. - "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. - "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. - "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC. - "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. - "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC. - "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. - "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC. - "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. - "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. - "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. - "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC. - "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC. - "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC. - "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. - "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. - "renesas,can-r8a7796" if CAN controller is a part of R8A77960 SoC. - "renesas,can-r8a77961" if CAN controller is a part of R8A77961 SoC. - "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. - "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC. - "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC. - "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. - "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 - compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 - compatible device. - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: physical base address and size of the R-Car CAN register map. -- interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must be "default". - -Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, -R8A77960, R8A77961, R8A77965, R8A77990, and R8A77995: -For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can -be used by both CAN and CAN FD controller at the same time. It needs to be -scaled to maximum frequency if any of these controllers use it. This is done -using the below properties: - -- assigned-clocks: phandle of clkp2(CANFD) clock. -- assigned-clock-rates: maximum frequency of this clock. - -Optional properties: -- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: - <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : External input clock - -Example -------- - -SoC common .dtsi file: - - can0: can@e6e80000 { - compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - status = "disabled"; - }; - -Board specific .dts file: - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt deleted file mode 100644 index 248c4ed97a0a..000000000000 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ /dev/null @@ -1,107 +0,0 @@ -Renesas R-Car CAN FD controller Device Tree Bindings ----------------------------------------------------- - -Required properties: -- compatible: Must contain one or more of the following: - - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers. - - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller. - - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller. - - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. - - "renesas,r8a774e1-canfd" for R8A774E1 (RZ/G2H) compatible controller. - - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. - - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller. - - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller. - - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller. - - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller. - - "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - -- reg: physical base address and size of the R-Car CAN FD register map. -- interrupts: interrupt specifiers for the Channel & Global interrupts -- clocks: phandles and clock specifiers for 3 clock inputs. -- clock-names: 3 clock input name strings: "fck", "canfd", "can_clk". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must be "default". - -Required child nodes: -The controller supports two channels and each is represented as a child node. -The name of the child nodes are "channel0" and "channel1" respectively. Each -child node supports the "status" property only, which is used to -enable/disable the respective channel. - -Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, -R8A7796, R8A77965, R8A77990, and R8A77995: -In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN -and CAN FD controller at the same time. It needs to be scaled to maximum -frequency if any of these controllers use it. This is done using the below -properties: - -- assigned-clocks: phandle of canfd clock. -- assigned-clock-rates: maximum frequency of this clock. - -Optional property: -The controller can operate in either CAN FD only mode (default) or -Classical CAN only mode. The mode is global to both the channels. In order to -enable the later, define the following optional property. - - renesas,no-can-fd: puts the controller in Classical CAN only mode. - -Example -------- - -SoC common .dtsi file: - - canfd: can@e66c0000 { - compatible = "renesas,r8a7795-canfd", - "renesas,rcar-gen3-canfd"; - reg = <0 0xe66c0000 0 0x8000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 914>, - <&cpg CPG_CORE R8A7795_CLK_CANFD>, - <&can_clk>; - clock-names = "fck", "canfd", "can_clk"; - assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; - assigned-clock-rates = <40000000>; - power-domains = <&cpg>; - status = "disabled"; - - channel0 { - status = "disabled"; - }; - - channel1 { - status = "disabled"; - }; - }; - -Board specific .dts file: - -E.g. below enables Channel 1 alone in the board in Classical CAN only mode. - -&canfd { - pinctrl-0 = <&canfd1_pins>; - pinctrl-names = "default"; - renesas,no-can-fd; - status = "okay"; - - channel1 { - status = "okay"; - }; -}; - -E.g. below enables Channel 0 alone in the board using External clock -as fCAN clock. - -&canfd { - pinctrl-0 = <&canfd0_pins>, <&can_clk_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml new file mode 100644 index 000000000000..fadc871fd6b0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car CAN Controller + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,can-r8a7778 # R-Car M1-A + - renesas,can-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-can # R-Car Gen1 + + - items: + - enum: + - renesas,can-r8a7742 # RZ/G1H + - renesas,can-r8a7743 # RZ/G1M + - renesas,can-r8a7744 # RZ/G1N + - renesas,can-r8a7745 # RZ/G1E + - renesas,can-r8a77470 # RZ/G1C + - renesas,can-r8a7790 # R-Car H2 + - renesas,can-r8a7791 # R-Car M2-W + - renesas,can-r8a7792 # R-Car V2H + - renesas,can-r8a7793 # R-Car M2-N + - renesas,can-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,can-r8a774a1 # RZ/G2M + - renesas,can-r8a774b1 # RZ/G2N + - renesas,can-r8a774c0 # RZ/G2E + - renesas,can-r8a774e1 # RZ/G2H + - renesas,can-r8a7795 # R-Car H3 + - renesas,can-r8a7796 # R-Car M3-W + - renesas,can-r8a77961 # R-Car M3-W+ + - renesas,can-r8a77965 # R-Car M3-N + - renesas,can-r8a77990 # R-Car E3 + - renesas,can-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: clkp1 + - const: clkp2 + - const: can_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,can-clock-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 3 ] + default: 0 + description: | + R-Car CAN Clock Source Select. Valid values are: + <0x0> (default) : Peripheral clock (clkp1) + <0x1> : Peripheral clock (clkp2) + <0x3> : External input clock + + assigned-clocks: + description: + Reference to the clkp2 (CANFD) clock. + On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock. This is a div6 + clock and can be used by both CAN and CAN FD controllers at the same + time. It needs to be scaled to maximum frequency if any of these + controllers use it. + + assigned-clock-rates: + description: Maximum frequency of the CANFD clock. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +allOf: + - $ref: can-controller.yaml# + + - if: + not: + properties: + compatible: + contains: + const: renesas,rcar-gen1-can + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: renesas,rcar-gen3-can + then: + required: + - assigned-clocks + - assigned-clock-rates + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; + reg = <0xe6e80000 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 916>; + }; diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml new file mode 100644 index 000000000000..0b33ba9ccb47 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car CAN FD Controller + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a774a1-canfd # RZ/G2M + - renesas,r8a774b1-canfd # RZ/G2N + - renesas,r8a774c0-canfd # RZ/G2E + - renesas,r8a774e1-canfd # RZ/G2H + - renesas,r8a7795-canfd # R-Car H3 + - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77965-canfd # R-Car M3-N + - renesas,r8a77970-canfd # R-Car V3M + - renesas,r8a77980-canfd # R-Car V3H + - renesas,r8a77990-canfd # R-Car E3 + - renesas,r8a77995-canfd # R-Car D3 + - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + items: + - description: Channel interrupt + - description: Global interrupt + + clocks: + maxItems: 3 + + clock-names: + items: + - const: fck + - const: canfd + - const: can_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,no-can-fd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The controller can operate in either CAN FD only mode (default) or + Classical CAN only mode. The mode is global to both the channels. + Specify this property to put the controller in Classical CAN only mode. + + assigned-clocks: + description: + Reference to the CANFD clock. The CANFD clock is a div6 clock and can be + used by both CAN (if present) and CAN FD controllers at the same time. + It needs to be scaled to maximum frequency if any of these controllers + use it. + + assigned-clock-rates: + description: Maximum frequency of the CANFD clock. + +patternProperties: + "^channel[01]$": + type: object + description: + The controller supports two channels and each is represented as a child + node. Each child node supports the "status" property only, which + is used to enable/disable the respective channel. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - assigned-clocks + - assigned-clock-rates + - channel0 + - channel1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + canfd: can@e66c0000 { + compatible = "renesas,r8a7795-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0xe66c0000 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 914>; + + channel0 { + }; + + channel1 { + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index de04626a8e9d..18247ebfc487 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -81,6 +81,12 @@ Optional properties: - gpio-controller: Boolean; if defined, MT7530's LED controller will run on GPIO mode. - #gpio-cells: Must be 2 if gpio-controller is defined. +- interrupt-controller: Boolean; Enables the internal interrupt controller. + +If interrupt-controller is defined, the following properties are required. + +- #interrupt-cells: Must be 1. +- interrupts: Parent interrupt for the interrupt controller. See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml new file mode 100644 index 000000000000..0b8a05dd52e6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP SJA1105 Automotive Ethernet Switch Family Device Tree Bindings + +description: + The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at + least one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum + cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed + depends on the SPI bus master driver. + +allOf: + - $ref: "dsa.yaml#" + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + +properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105t + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1110a + - nxp,sja1110b + - nxp,sja1110c + - nxp,sja1110d + + reg: + maxItems: 1 + + # Optional container node for the 2 internal MDIO buses of the SJA1110 + # (one for the internal 100base-T1 PHYs and the other for the single + # 100base-TX PHY). The "reg" property does not have physical significance. + # The PHY addresses to port correspondence is as follows: for 100base-T1, + # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has + # PHY 1. + mdios: + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^mdio@[0-1]$": + type: object + + allOf: + - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" + + properties: + compatible: + oneOf: + - enum: + - nxp,sja1110-base-t1-mdio + - nxp,sja1110-base-tx-mdio + + reg: + oneOf: + - enum: + - 0 + - 1 + + required: + - compatible + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1 { + reg = <0x1>; + compatible = "nxp,sja1105t"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index ccbc6d89325d..8c73f67c43ca 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -3,6 +3,7 @@ Required properties: - compatible: should be one of: + "qca,qca8327" "qca,qca8334" "qca,qca8337" @@ -20,6 +21,10 @@ described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external mdio-bus each subnode describing a port needs to have a valid phandle referencing the internal PHY it is connected to. This is because there's no N:N mapping of port and PHY id. +To declare the internal mdio-bus configuration, declare a mdio node in the +switch node and declare the phandle for the port referencing the internal +PHY is connected to. In this config a internal mdio-bus is registered and +the mdio MASTER is used as communication. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. @@ -149,26 +154,61 @@ for the internal master mdio-bus configuration: port@1 { reg = <1>; label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; }; port@2 { reg = <2>; label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; }; port@3 { reg = <3>; label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; }; port@4 { reg = <4>; label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; }; port@5 { reg = <5>; label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; }; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/sja1105.txt b/Documentation/devicetree/bindings/net/dsa/sja1105.txt deleted file mode 100644 index 13fd21074d48..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/sja1105.txt +++ /dev/null @@ -1,156 +0,0 @@ -NXP SJA1105 switch driver -========================= - -Required properties: - -- compatible: - Must be one of: - - "nxp,sja1105e" - - "nxp,sja1105t" - - "nxp,sja1105p" - - "nxp,sja1105q" - - "nxp,sja1105r" - - "nxp,sja1105s" - - Although the device ID could be detected at runtime, explicit bindings - are required in order to be able to statically check their validity. - For example, SGMII can only be specified on port 4 of R and S devices, - and the non-SGMII devices, while pin-compatible, are not equal in terms - of support for RGMII internal delays (supported on P/Q/R/S, but not on - E/T). - -Optional properties: - -- sja1105,role-mac: -- sja1105,role-phy: - Boolean properties that can be assigned under each port node. By - default (unless otherwise specified) a port is configured as MAC if it - is driving a PHY (phy-handle is present) or as PHY if it is PHY-less - (fixed-link specified, presumably because it is connected to a MAC). - The effect of this property (in either its implicit or explicit form) - is: - - In the case of MII or RMII it specifies whether the SJA1105 port is a - clock source or sink for this interface (not applicable for RGMII - where there is a Tx and an Rx clock). - - In the case of RGMII it affects the behavior regarding internal - delays: - 1. If sja1105,role-mac is specified, and the phy-mode property is one - of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity - designated to apply the delay/clock skew necessary for RGMII - is the PHY. The SJA1105 MAC does not apply any internal delays. - 2. If sja1105,role-phy is specified, and the phy-mode property is one - of the above, the designated entity to apply the internal delays - is the SJA1105 MAC (if hardware-supported). This is only supported - by the second-generation (P/Q/R/S) hardware. On a first-generation - E or T device, it is an error to specify an RGMII phy-mode other - than "rgmii" for a port that is in fixed-link mode. In that case, - the clock skew must either be added by the MAC at the other end of - the fixed-link, or by PCB serpentine traces on the board. - These properties are required, for example, in the case where SJA1105 - ports are at both ends of a MII/RMII PHY-less setup. One end would need - to have sja1105,role-mac, while the other sja1105,role-phy. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard -DSA required and optional properties. - -Other observations ------------------- - -The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least -one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum -cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed -depends on the SPI bus master driver. - -Example -------- - -Ethernet switch connected via SPI to the host, CPU port wired to enet2: - -arch/arm/boot/dts/ls1021a-tsn.dts: - -/* SPI controller of the LS1021 */ -&dspi0 { - sja1105@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,sja1105t"; - spi-max-frequency = <4000000>; - fsl,spi-cs-sck-delay = <1000>; - fsl,spi-sck-cs-delay = <1000>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - /* ETH5 written on chassis */ - label = "swp5"; - phy-handle = <&rgmii_phy6>; - phy-mode = "rgmii-id"; - reg = <0>; - /* Implicit "sja1105,role-mac;" */ - }; - port@1 { - /* ETH2 written on chassis */ - label = "swp2"; - phy-handle = <&rgmii_phy3>; - phy-mode = "rgmii-id"; - reg = <1>; - /* Implicit "sja1105,role-mac;" */ - }; - port@2 { - /* ETH3 written on chassis */ - label = "swp3"; - phy-handle = <&rgmii_phy4>; - phy-mode = "rgmii-id"; - reg = <2>; - /* Implicit "sja1105,role-mac;" */ - }; - port@3 { - /* ETH4 written on chassis */ - phy-handle = <&rgmii_phy5>; - label = "swp4"; - phy-mode = "rgmii-id"; - reg = <3>; - /* Implicit "sja1105,role-mac;" */ - }; - port@4 { - /* Internal port connected to eth2 */ - ethernet = <&enet2>; - phy-mode = "rgmii"; - reg = <4>; - /* Implicit "sja1105,role-phy;" */ - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -/* MDIO controller of the LS1021 */ -&mdio0 { - /* BCM5464 */ - rgmii_phy3: ethernet-phy@3 { - reg = <0x3>; - }; - rgmii_phy4: ethernet-phy@4 { - reg = <0x4>; - }; - rgmii_phy5: ethernet-phy@5 { - reg = <0x5>; - }; - rgmii_phy6: ethernet-phy@6 { - reg = <0x6>; - }; -}; - -/* Ethernet master port of the LS1021 */ -&enet2 { - phy-connection-type = "rgmii"; - status = "ok"; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index e8f04687a3e0..b0933a8c295a 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -68,6 +68,7 @@ properties: - tbi - rev-mii - rmii + - rev-rmii # RX and TX delays are added by the MAC when required - rgmii @@ -97,6 +98,7 @@ properties: - 10gbase-kr - usxgmii - 10gbase-r + - 25gbase-r phy-mode: $ref: "#/properties/phy-connection-type" diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml new file mode 100644 index 000000000000..d08a88125a5c --- /dev/null +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ingenic,mac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for MAC in Ingenic SoCs + +maintainers: + - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> + +description: + The Ethernet Media Access Controller in Ingenic SoCs. + +properties: + compatible: + enum: + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + mode-reg: + description: An extra syscon register that control ethernet interface and timing delay + + rx-clk-delay-ps: + description: RGMII receive clock delay defined in pico seconds + + tx-clk-delay-ps: + description: RGMII transmit clock delay defined in pico seconds + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - mode-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/x1000-cgu.h> + + mac: ethernet@134b0000 { + compatible = "ingenic,x1000-mac"; + reg = <0x134b0000 0x2000>; + + interrupt-parent = <&intc>; + interrupts = <55>; + interrupt-names = "macirq"; + + clocks = <&cgu X1000_CLK_MAC>; + clock-names = "stmmaceth"; + + mode-reg = <&mac_phy_ctrl>; + }; +... diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml new file mode 100644 index 000000000000..347b912a46bb --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Ethernet switch controller + +maintainers: + - Steen Hegelund <steen.hegelund@microchip.com> + - Lars Povlsen <lars.povlsen@microchip.com> + +description: | + The SparX-5 Enterprise Ethernet switch family provides a rich set of + Enterprise switching features such as advanced TCAM-based VLAN and + QoS processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile content + aware processor (VCAP). + + IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported + with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K + IPv6 (S,G) multicast groups. + + L3 security features include source guard and reverse path + forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and + IP tunnels (IP over GRE/IP). + + The SparX-5 switch family targets managed Layer 2 and Layer 3 + equipment in SMB, SME, and Enterprise where high port count + 1G/2.5G/5G/10G switching with 10G/25G aggregation links is required. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: microchip,sparx5-switch + + reg: + items: + - description: cpu target + - description: devices target + - description: general control block target + + reg-names: + items: + - const: cpu + - const: devices + - const: gcb + + interrupts: + minItems: 1 + items: + - description: register based extraction + - description: frame dma based extraction + + interrupt-names: + minItems: 1 + items: + - const: xtr + - const: fdma + + resets: + items: + - description: Reset controller used for switch core reset (soft reset) + + reset-names: + items: + - const: switch + + mac-address: true + + ethernet-ports: + type: object + patternProperties: + "^port@[0-9a-f]+$": + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + reg: + description: Switch port number + + phys: + maxItems: 1 + description: + phandle of a Ethernet SerDes PHY. This defines which SerDes + instance will handle the Ethernet traffic. + + phy-mode: + description: + This specifies the interface used by the Ethernet SerDes towards + the PHY or SFP. + + microchip,bandwidth: + description: Specifies bandwidth in Mbit/s allocated to the port. + $ref: "/schemas/types.yaml#/definitions/uint32" + maximum: 25000 + + phy-handle: + description: + phandle of a Ethernet PHY. This is optional and if provided it + points to the cuPHY used by the Ethernet SerDes. + + sfp: + description: + phandle of an SFP. This is optional and used when not specifying + a cuPHY. It points to the SFP node that describes the SFP used by + the Ethernet SerDes. + + managed: true + + microchip,sd-sgpio: + description: + Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs + This is optional, and only needed if the default used index is + is not correct. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 383 + + required: + - reg + - phys + - phy-mode + - microchip,bandwidth + + oneOf: + - required: + - phy-handle + - required: + - sfp + - managed + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - resets + - reset-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + switch: switch@600000000 { + compatible = "microchip,sparx5-switch"; + reg = <0 0x401000>, + <0x10004000 0x7fc000>, + <0x11010000 0xaf0000>; + reg-names = "cpu", "devices", "gcb"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr"; + resets = <&reset 0>; + reset-names = "switch"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + microchip,bandwidth = <1000>; + phys = <&serdes 13>; + phy-handle = <&phy0>; + phy-mode = "qsgmii"; + }; + /* ... */ + /* Then the 25G interfaces */ + port60: port@60 { + reg = <60>; + microchip,bandwidth = <25000>; + phys = <&serdes 29>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth60>; + managed = "in-band-status"; + microchip,sd-sgpio = <365>; + }; + port61: port@61 { + reg = <61>; + microchip,bandwidth = <25000>; + phys = <&serdes 30>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth61>; + managed = "in-band-status"; + microchip,sd-sgpio = <369>; + }; + port62: port@62 { + reg = <62>; + microchip,bandwidth = <25000>; + phys = <&serdes 31>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth62>; + managed = "in-band-status"; + microchip,sd-sgpio = <373>; + }; + port63: port@63 { + reg = <63>; + microchip,bandwidth = <25000>; + phys = <&serdes 32>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth63>; + managed = "in-band-status"; + microchip,sd-sgpio = <377>; + }; + /* Finally the Management interface */ + port64: port@64 { + reg = <64>; + microchip,bandwidth = <1000>; + phys = <&serdes 0>; + phy-handle = <&phy64>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 01 02 03 ]; + }; + }; + }; + +... +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml : diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 477066e2b821..081742c2b726 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + wake-gpios: maxItems: 1 description: @@ -80,6 +83,8 @@ examples: en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + + clocks = <&rpmcc 20>; }; }; # UART example on Raspberry Pi diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 7443490d4cc6..ed88ba4b94df 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -44,6 +44,7 @@ description: properties: compatible: enum: + - qcom,msm8998-ipa - qcom,sc7180-ipa - qcom,sc7280-ipa - qcom,sdm845-ipa @@ -105,7 +106,6 @@ properties: - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt deleted file mode 100644 index 709ca6d51650..000000000000 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ /dev/null @@ -1,69 +0,0 @@ -Qualcomm Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Qualcomm devices. - -Serial attached Qualcomm devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - compatible: should contain one of the following: - * "qcom,qca6174-bt" - * "qcom,qca9377-bt" - * "qcom,wcn3990-bt" - * "qcom,wcn3991-bt" - * "qcom,wcn3998-bt" - * "qcom,qca6390-bt" - -Optional properties for compatible string qcom,qca6174-bt: - - - enable-gpios: gpio specifier used to enable chip - - clocks: clock provided to the controller (SUSCLK_32KHZ) - - firmware-name: specify the name of nvm firmware to load - -Optional properties for compatible string qcom,qca9377-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - -Required properties for compatible string qcom,wcn399x-bt: - - - vddio-supply: VDD_IO supply regulator handle. - - vddxo-supply: VDD_XO supply regulator handle. - - vddrf-supply: VDD_RF supply regulator handle. - - vddch0-supply: VDD_CH0 supply regulator handle. - -Optional properties for compatible string qcom,wcn399x-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - firmware-name: specify the name of nvm firmware to load - - clocks: clock provided to the controller - -Examples: - -serial@7570000 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - firmware-name = "nvm_00440302.bin"; - }; -}; - -serial@898000 { - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - firmware-name = "crnv21.bin"; - clocks = <&rpmhcc RPMH_RF_CLK2>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml new file mode 100644 index 000000000000..f93c6e7a1b59 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Bluetooth Chips + +maintainers: + - Balakrishna Godavarthi <bgodavar@codeaurora.org> + - Rocky Liao <rjliao@codeaurora.org> + +description: + This binding describes Qualcomm UART-attached bluetooth chips. + +properties: + compatible: + enum: + - qcom,qca6174-bt + - qcom,qca9377-bt + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + - qcom,qca6390-bt + - qcom,wcn6750-bt + + enable-gpios: + maxItems: 1 + description: gpio specifier used to enable chip + + swctrl-gpios: + maxItems: 1 + description: gpio specifier is used to find status + of clock supply to SoC + + clocks: + maxItems: 1 + description: clock provided to the controller (SUSCLK_32KHZ) + + vddio-supply: + description: VDD_IO supply regulator handle + + vddxo-supply: + description: VDD_XO supply regulator handle + + vddrf-supply: + description: VDD_RF supply regulator handle + + vddch0-supply: + description: VDD_CH0 supply regulator handle + + vddaon-supply: + description: VDD_AON supply regulator handle + + vddbtcxmx-supply: + description: VDD_BT_CXMX supply regulator handle + + vddrfacmn-supply: + description: VDD_RFA_CMN supply regulator handle + + vddrfa0p8-supply: + description: VDD_RFA_0P8 suppply regulator handle + + vddrfa1p7-supply: + description: VDD_RFA_1P7 supply regulator handle + + vddrfa1p2-supply: + description: VDD_RFA_1P2 supply regulator handle + + vddrfa2p2-supply: + description: VDD_RFA_2P2 supply regulator handle + + vddasd-supply: + description: VDD_ASD supply regulator handle + + max-speed: + description: see Documentation/devicetree/bindings/serial/serial.yaml + + firmware-name: + description: specify the name of nvm firmware to load + + local-bd-address: + description: see Documentation/devicetree/bindings/net/bluetooth.txt + + +required: + - compatible + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,qca6174-bt + then: + required: + - enable-gpios + - clocks + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + then: + required: + - vddio-supply + - vddxo-supply + - vddrf-supply + - vddch0-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vddbtcxmx-supply + - vddrfacmn-supply + - vddrfa0p8-supply + - vddrfa1p7-supply + - vddrfa1p2-supply + - vddasd-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + + bluetooth { + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + firmware-name = "nvm_00440302.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + firmware-name = "crnv21.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddio-supply = <&vreg_l19b_1p8>; + vddaon-supply = <&vreg_s7b_0p9>; + vddbtcxmx-supply = <&vreg_s7b_0p9>; + vddrfacmn-supply = <&vreg_s7b_0p9>; + vddrfa0p8-supply = <&vreg_s7b_0p9>; + vddrfa1p7-supply = <&vreg_s1b_1p8>; + vddrfa1p2-supply = <&vreg_s8b_1p2>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + max-speed = <3200000>; + firmware-name = "msnv11.bin"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml new file mode 100644 index 000000000000..bb94a2388520 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL82xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + Bindings for Realtek RTL82xx PHYs + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + realtek,clkout-disable: + type: boolean + description: + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. + + + realtek,aldps-enable: + type: boolean + description: + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset. + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + realtek,clkout-disable; + realtek,aldps-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 8ce5ed8a58dd..c101a1ec846e 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -10,7 +10,7 @@ allOf: - $ref: ethernet-controller.yaml# maintainers: - - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> + - Sergei Shtylyov <sergei.shtylyov@gmail.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 5acddb6171bf..083623c8d718 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -19,10 +19,12 @@ select: - rockchip,rk3128-gmac - rockchip,rk3228-gmac - rockchip,rk3288-gmac + - rockchip,rk3308-gmac - rockchip,rk3328-gmac - rockchip,rk3366-gmac - rockchip,rk3368-gmac - rockchip,rk3399-gmac + - rockchip,rk3568-gmac - rockchip,rv1108-gmac required: - compatible @@ -32,17 +34,23 @@ allOf: properties: compatible: - items: - - enum: - - rockchip,px30-gmac - - rockchip,rk3128-gmac - - rockchip,rk3228-gmac - - rockchip,rk3288-gmac - - rockchip,rk3328-gmac - - rockchip,rk3366-gmac - - rockchip,rk3368-gmac - - rockchip,rk3399-gmac - - rockchip,rv1108-gmac + oneOf: + - items: + - enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3308-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + - items: + - enum: + - rockchip,rk3568-gmac + - const: snps,dwmac-4.20a clocks: minItems: 5 diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 2edd8bea993e..56f2235f5fb5 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -51,11 +51,20 @@ properties: - allwinner,sun8i-r40-emac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac - amlogic,meson6-dwmac - amlogic,meson8b-dwmac - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac - rockchip,px30-gmac - rockchip,rk3128-gmac - rockchip,rk3228-gmac @@ -310,6 +319,11 @@ allOf: - allwinner,sun8i-r40-emac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac @@ -353,6 +367,13 @@ allOf: - allwinner,sun8i-r40-emac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index d479ad977e24..b6791702bcfc 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -9,7 +9,6 @@ Required properties: "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516 - "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 01dcd14e7b2a..320a232c7208 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -118,7 +118,7 @@ patternProperties: description: Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, EXTERNAL_SSC or INTERNAL_SSC. - Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] default: 0 diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml new file mode 100644 index 000000000000..d50571affd1f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple GPIO controller + +maintainers: + - Mark Kettenis <kettenis@openbsd.org> + +description: | + The Apple GPIO controller is a simple combined pin and GPIO + controller present on Apple ARM SoC platforms, including various + iPhone and iPad devices and the "Apple Silicon" Macs. + +properties: + compatible: + items: + - const: apple,t8103-pinctrl + - const: apple,pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupts: + description: One interrupt for each of the (up to 7) interrupt + groups supported by the controller sorted by interrupt group + number in ascending order. + minItems: 1 + maxItems: 7 + + interrupt-controller: true + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + pinmux: + description: + Values are constructed from pin number and alternate function + configuration number using the APPLE_PINMUX() helper macro + defined in include/dt-bindings/pinctrl/apple.h. + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/pinctrl/apple.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pinctrl: pinctrl@23c100000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + clocks = <&gpio_clk>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 212>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>; + + pcie_pins: pcie-pins { + pinmux = <APPLE_PINMUX(150, 1)>, + <APPLE_PINMUX(151, 1)>, + <APPLE_PINMUX(32, 1)>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index ad91c0bc54da..ad2866c99738 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -46,8 +46,8 @@ patternProperties: PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, - SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, @@ -74,9 +74,9 @@ patternProperties: RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, - SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt deleted file mode 100644 index 8ab2d468dbdb..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt +++ /dev/null @@ -1,55 +0,0 @@ -Broadcom Northstar pins mux controller - -Some of Northstar SoCs's pins can be used for various purposes thanks to the mux -controller. This binding allows describing mux controller and listing available -functions. They can be referenced later by other bindings to let system -configure controller correctly. - -A list of pins varies across chipsets so few bindings are available. - -Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon" -noce. - -Required properties: -- compatible: must be one of: - "brcm,bcm4708-pinmux" - "brcm,bcm4709-pinmux" - "brcm,bcm53012-pinmux" -- offset: offset of pin registers in the CRU block - -Functions and their groups available for all chipsets: -- "spi": "spi_grp" -- "i2c": "i2c_grp" -- "pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp" -- "uart1": "uart1_grp" - -Additionally available on BCM4709 and BCM53012: -- "mdio": "mdio_grp" -- "uart2": "uart2_grp" -- "sdio": "sdio_pwr_grp", "sdio_1p8v_grp" - -For documentation of subnodes see: -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Example: - dmu@1800c000 { - compatible = "simple-bus"; - ranges = <0 0x1800c000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - cru@100 { - compatible = "syscon", "simple-mfd"; - reg = <0x100 0x1a4>; - - pinctrl { - compatible = "brcm,bcm4708-pinmux"; - offset = <0xc0>; - - spi-pins { - function = "spi"; - groups = "spi_grp"; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml new file mode 100644 index 000000000000..470aff599c27 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar pins mux controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + Some of Northstar SoCs's pins can be used for various purposes thanks to the + mux controller. This binding allows describing mux controller and listing + available functions. They can be referenced later by other bindings to let + system configure controller correctly. + + A list of pins varies across chipsets so few bindings are available. + + Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon" + node. + +properties: + compatible: + enum: + - brcm,bcm4708-pinmux + - brcm,bcm4709-pinmux + - brcm,bcm53012-pinmux + + offset: + description: offset of pin registers in the CRU block + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + +patternProperties: + '-pins$': + type: object + description: pin node + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ] + groups: + minItems: 1 + maxItems: 4 + items: + enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp, + uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ] + + required: + - function + - groups + + additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm4708-pinmux + then: + patternProperties: + '-pins$': + properties: + function: + enum: [ spi, i2c, pwm, uart1 ] + groups: + items: + enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp, + uart1_grp ] + +required: + - offset + +additionalProperties: false + +examples: + - | + cru@1800c100 { + compatible = "syscon", "simple-mfd"; + reg = <0x1800c100 0x1a4>; + + pinctrl { + compatible = "brcm,bcm4708-pinmux"; + offset = <0xc0>; + + spi-pins { + function = "spi"; + groups = "spi_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index 6ec3c8d79f49..2fa5edac7a35 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -49,6 +49,7 @@ Optional properties: - interrupt-controller: Marks the device node as a interrupt controller. - drive-open-drain: Sets the ODR flag in the IOCON register. This configures the IRQ output as open drain active low. +- reset-gpios: Corresponds to the active-low RESET# pin for the chip Optional device specific properties: - microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices @@ -135,6 +136,7 @@ gpio21: gpio@21 { microchip,irq-mirror; pinctrl-names = "default"; pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>; + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; gpio21pullups: pinmux { pins = "gpio0", "gpio1", "gpio2", "gpio3", diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 360e59c9301a..5fe2c26c28bf 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -12,6 +12,7 @@ Required properties: "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. "mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl. "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. + "mediatek,mt8365-pinctrl", compatible with mt8365 pinctrl. "mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index f6a9760558a6..161216daf463 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -31,6 +31,7 @@ PMIC's from Qualcomm. "qcom,pm8350b-gpio" "qcom,pm8350c-gpio" "qcom,pmk8350-gpio" + "qcom,pm7325-gpio" "qcom,pmr735a-gpio" "qcom,pmr735b-gpio" "qcom,pm6150-gpio" @@ -120,6 +121,7 @@ to specify in a pin configuration subnode: gpio1-gpio8 for pm8350b gpio1-gpio9 for pm8350c gpio1-gpio4 for pmk8350 + gpio1-gpio10 for pm7325 gpio1-gpio4 for pmr735a gpio1-gpio4 for pmr735b gpio1-gpio10 for pm6150 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index 0ba07bc96c55..5363d44cbb74 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -21,6 +21,7 @@ of PMIC's from Qualcomm. "qcom,pmi8950-mpp", "qcom,pm8994-mpp", "qcom,pma8084-mpp", + "qcom,pmi8994-mpp", And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp" if the device is on an spmi bus or an ssbi bus respectively. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml new file mode 100644 index 000000000000..5f7adaa81f83 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +title: Qualcomm Technologies, Inc. SM6125 TLMM block + +maintainers: + - Martin Botka <martin.botka@somainline.org> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the SM6125 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6125-tlmm + + reg: + minItems: 3 + maxItems: 3 + + reg-names: + items: + - const: "west" + - const: "south" + - const: "east" + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm6125-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm6125-tlmm-state" + +$defs: + qcom-sm6125-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb, + audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk, + dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, + ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte, + nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04, + qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx, + swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@500000 { + compatible = "qcom,sm6125-tlmm"; + reg = <0x00500000 0x400000>, + <0x00900000 0x400000>, + <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml index db1aa238cda5..b62c2431f94e 100644 --- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 phys: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to the USB phy monitored-battery: diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml new file mode 100644 index 000000000000..2b5e977bf409 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8893.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8893.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator driver for MAX8893 PMIC from Maxim Integrated. + +maintainers: + - Sergey Larin <cerg2010cerg2010@mail.ru> + +description: | + The device has 5 LDO regulators and a single BUCK regulator. + Programming is done through I2C bus. + +properties: + compatible: + const: maxim,max8893 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "^(ldo[1-5]|buck)$": + $ref: "regulator.yaml#" + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e { + compatible = "maxim,max8893"; + reg = <0x3e>; + + regulators { + /* Front camera - s5k6aafx, back - m5mo */ + /* Numbers used to indicate the sequence */ + front_1_back_1: buck { + regulator-name = "cam_isp_core_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + front_4_back_5: ldo1 { + regulator-name = "vt_io_1v8,cam_isp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + front_3_back_4: ldo2 { + regulator-name = "vt_core_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + front_5_back_6: ldo3 { + regulator-name = "vt_cam_1v8,vt_sensor_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4 { + /* not used */ + }; + + back_7: ldo5 { + regulator-name = "cam_sensor_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml new file mode 100644 index 000000000000..8cc413eb482d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml @@ -0,0 +1,385 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6359 Regulator from MediaTek Integrated + +maintainers: + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> + +description: | + List of regulators provided by this controller. It is named + according to its regulator type, buck_<name> and ldo_<name>. + MT6359 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$" + + unevaluatedProperties: false + + "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$" + + unevaluatedProperties: false + + "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$" + + unevaluatedProperties: false + + "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$" + + unevaluatedProperties: false + + "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$" + + unevaluatedProperties: false + + "^ldo_v(fe|bif|io)28$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(fe|bif|io)28$" + + unevaluatedProperties: false + + "^ldo_v(aud|io|aux|rf|m)18$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(aud|io|aux|rf|m)18$" + + unevaluatedProperties: false + + "^ldo_vsim[12]$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vsim[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6359_vs1_buck_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vgpu11_buck_reg: buck_vgpu11 { + regulator-name = "vgpu11"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vmodem_buck_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <200>; + }; + mt6359_vpu_buck_reg: buck_vpu { + regulator-name = "vpu"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_buck_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vs2_buck_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1600000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vpa_buck_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-enable-ramp-delay = <300>; + }; + mt6359_vproc2_buck_reg: buck_vproc2 { + regulator-name = "vproc2"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vproc1_buck_reg: buck_vproc1 { + regulator-name = "vproc1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub { + regulator-name = "vcore_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub { + regulator-name = "vgpu11_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vaud18_ldo_reg: ldo_vaud18 { + regulator-name = "vaud18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vsim1_ldo_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vibr_ldo_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vrf12_ldo_reg: ldo_vrf12 { + regulator-name = "vrf12"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vusb_ldo_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 { + regulator-name = "vsram_proc2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vio18_ldo_reg: ldo_vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vcamio_ldo_reg: ldo_vcamio { + regulator-name = "vcamio"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vcn18_ldo_reg: ldo_vcn18 { + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vfe28_ldo_reg: ldo_vfe28 { + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <120>; + }; + mt6359_vcn13_ldo_reg: ldo_vcn13 { + regulator-name = "vcn13"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt { + regulator-name = "vcn33_1_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi { + regulator-name = "vcn33_1_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vaux18_ldo_reg: ldo_vaux18 { + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsram_others_ldo_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vefuse_ldo_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + mt6359_vxo22_ldo_reg: ldo_vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + mt6359_vrfck_ldo_reg: ldo_vrfck { + regulator-name = "vrfck"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1700000>; + }; + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 { + regulator-name = "vrfck"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1600000>; + }; + mt6359_vbif28_ldo_reg: ldo_vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vio28_ldo_reg: ldo_vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + mt6359_vemc_ldo_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vemc_1_ldo_reg: ldo_vemc_1 { + regulator-name = "vemc"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt { + regulator-name = "vcn33_2_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi { + regulator-name = "vcn33_2_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_va12_ldo_reg: ldo_va12 { + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + mt6359_va09_ldo_reg: ldo_va09 { + regulator-name = "va09"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vrf18_ldo_reg: ldo_vrf18 { + regulator-name = "vrf18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1810000>; + }; + mt6359_vsram_md_ldo_reg: ldo_vsram_md { + regulator-name = "vsram_md"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vufs_ldo_reg: ldo_vufs { + regulator-name = "vufs"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vm18_ldo_reg: ldo_vm18 { + regulator-name = "vm18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + mt6359_vbbck_ldo_reg: ldo_vbbck { + regulator-name = "vbbck"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 { + regulator-name = "vsram_proc1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsim2_ldo_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub { + regulator-name = "vsram_others_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index e561a5b941e4..34de38377aa6 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -33,6 +33,9 @@ description: | The names used for regulator nodes must match those supported by a given PMIC. Supported regulator node names are + For PM6150, smps1 - smps5, ldo1 - ldo19 + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PM7325, smps1 - smps8, ldo1 - ldo19 For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 For PM8150, smps1 - smps10, ldo1 - ldo18 @@ -41,15 +44,15 @@ description: | For PM8350C, smps1 - smps10, ldo1 - ldo13, bob For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 For PMI8998, bob - For PM6150, smps1 - smps5, ldo1 - ldo19 - For PM6150L, smps1 - smps8, ldo1 - ldo11, bob - For PMX55, smps1 - smps7, ldo1 - ldo16 - For PM7325, smps1 - smps8, ldo1 - ldo19 For PMR735A, smps1 - smps3, ldo1 - ldo7 + For PMX55, smps1 - smps7, ldo1 - ldo16 properties: compatible: enum: + - qcom,pm6150-rpmh-regulators + - qcom,pm6150l-rpmh-regulators + - qcom,pm7325-rpmh-regulators - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators - qcom,pm8009-1-rpmh-regulators @@ -59,11 +62,9 @@ properties: - qcom,pm8350c-rpmh-regulators - qcom,pm8998-rpmh-regulators - qcom,pmi8998-rpmh-regulators - - qcom,pm6150-rpmh-regulators - - qcom,pm6150l-rpmh-regulators - - qcom,pmx55-rpmh-regulators - - qcom,pm7325-rpmh-regulators + - qcom,pmm8155au-rpmh-regulators - qcom,pmr735a-rpmh-regulators + - qcom,pmx55-rpmh-regulators qcom,pmic-id: description: | diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index a35c6cb9bf97..83b53579f463 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -24,6 +24,10 @@ description: For mp5496, s2 + For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, + l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, + l26, l27, l28, lvs1 + For pm8841, s1, s2, s3, s4, s5, s6, s7, s8 For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, @@ -68,6 +72,7 @@ properties: compatible: enum: - qcom,rpm-mp5496-regulators + - qcom,rpm-pm8226-regulators - qcom,rpm-pm8841-regulators - qcom,rpm-pm8916-regulators - qcom,rpm-pm8941-regulators diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 6d0bc9cd4040..a6ae9ecae5cc 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -117,6 +117,88 @@ properties: description: Enable over current protection. type: boolean + regulator-oc-protection-microamp: + description: Set over current protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-oc-error-microamp: + description: Set over current error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested. + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-oc-warn-microamp: + description: Set over current warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + + regulator-ov-protection-microvolt: + description: Set over voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-ov-error-microvolt: + description: Set over voltage error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-ov-warn-microvolt: + description: Set over voltage warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-uv-protection-microvolt: + description: Set over under voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-uv-error-microvolt: + description: Set under voltage error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-uv-warn-microvolt: + description: Set over under voltage warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where + it gets damaged. Recovery actions should be initiated. Zero can be passed + to disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-temp-protection-kelvin: + description: Set over temperature protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-temp-error-kelvin: + description: Set over temperature error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-temp-warn-kelvin: + description: Set over temperature warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where it + gets damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + regulator-active-discharge: description: | tristate, enable/disable active discharge of regulators. The values are: diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file mode 100644 index 000000000000..0534b0d68359 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,vsel-active-low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml new file mode 100644 index 000000000000..796ceac87445 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6245 High Current Voltage Regulator + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6245 is a high-performance, synchronous step-down converter + that can deliver up to 14A output current with an input supply + voltage range of 4.5V to 17V. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6245 + + reg: + maxItems: 1 + + enable-gpios: + description: | + A connection of the chip 'enable' gpio line. If not provided, + it will be treat as a default-on power. + maxItems: 1 + + richtek,oc-level-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + description: | + Over current level selection. Each respective value means the current + limit 8A, 14A, 12A, 10A. If this property is missing then keep in + in chip default. + + richtek,ot-level-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2] + description: | + Over temperature level selection. Each respective value means the degree + 150'c, 130'c, 170'c. If this property is missing then keep in chip + default. + + richtek,pgdly-time-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + description: | + Power good signal delay time selection. Each respective value means the + delay time 0us, 10us, 20us, 40us. If this property is missing then keep + in chip default. + + + richtek,switch-freq-select: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2] + description: | + Buck switch frequency selection. Each respective value means 400KHz, + 800KHz, 1200KHz. If this property is missing then keep in chip default. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6245@34 { + compatible = "richtek,rt6245"; + status = "okay"; + reg = <0x34>; + enable-gpios = <&gpio26 2 0>; + + regulator-name = "rt6245-regulator"; + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml index b6515a0cee62..7cb74cc8c5d9 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -27,6 +27,12 @@ patternProperties: Properties for single regulator. $ref: "regulator.yaml#" + properties: + rohm,ocw-fet-ron-micro-ohms: + description: | + External FET's ON-resistance. Required if VoutS1 OCP/OCW is + to be set. + required: - regulator-name diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml new file mode 100644 index 000000000000..2cd3bc6bd8d6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + The PolarFire SoC system controller is communicated with via a mailbox. + This document describes the bindings for the client portion of that mailbox. + + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,polarfire-soc-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller: syscontroller { + compatible = "microchip,polarfire-soc-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index db61f0731a20..2e35aeaa8781 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -57,7 +57,7 @@ patternProperties: rate sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle of the CPU DAI patternProperties: @@ -71,7 +71,7 @@ patternProperties: properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array description: phandle of the codec DAI required: diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index b4c190bddd84..61802a11baf4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -49,7 +49,7 @@ properties: maxItems: 1 memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to a node describing reserved memory (System RAM memory) The M core can't access all the DDR memory space on some platform, diff --git a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt deleted file mode 100644 index fb1a6728638d..000000000000 --- a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt +++ /dev/null @@ -1,11 +0,0 @@ -Renesas RZ/N1 SPI Controller - -This controller is based on the Synopsys DW Synchronous Serial Interface and -inherits all properties defined in snps,dw-apb-ssi.txt except for the -compatible property. - -Required properties: -- compatible : The device specific string followed by the generic RZ/N1 string. - Therefore it must be one of: - "renesas,r9a06g032-spi", "renesas,rzn1-spi" - "renesas,r9a06g033-spi", "renesas,rzn1-spi" diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 4825157cd92e..ca91201a9926 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -67,6 +67,12 @@ properties: const: baikal,bt1-sys-ssi - description: Canaan Kendryte K210 SoS SPI Controller const: canaan,k210-spi + - description: Renesas RZ/N1 SPI Controller + items: + - enum: + - renesas,r9a06g032-spi # RZ/N1D + - renesas,r9a06g033-spi # RZ/N1S + - const: renesas,rzn1-spi # RZ/N1 reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt deleted file mode 100644 index 05a2ef945664..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-cadence.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence SPI controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - If a decoder is used, this will be the number of - chip selects after the decoder. -- is-decoded-cs : Flag to indicate whether decoder is used or not. - -Example: - - spi@e0007000 { - compatible = "xlnx,zynq-spi-r1p6"; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 26>, <&clkc 35>; - interrupt-parent = <&intc>; - interrupts = <0 49 4>; - num-cs = <4>; - is-decoded-cs = <0>; - reg = <0xe0007000 0x1000>; - } ; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml new file mode 100644 index 000000000000..9787be21318e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-cadence.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - cdns,spi-r1p6 + - xlnx,zynq-spi-r1p6 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + + num-cs: + description: | + Number of chip selects used. If a decoder is used, + this will be the number of chip selects after the + decoder. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 4 + + is-decoded-cs: + description: | + Flag to indicate whether decoder is used or not. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + +unevaluatedProperties: false + +examples: + - | + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 0477396e4945..faef4f6f55b8 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -114,8 +114,11 @@ patternProperties: Compatible of the SPI device. reg: - minimum: 0 - maximum: 256 + minItems: 1 + maxItems: 256 + items: + minimum: 0 + maximum: 256 description: Chip select used by the device. diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index d09c6355e22d..51c7622dc20b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -72,7 +72,7 @@ examples: mux-controls = <&mux>; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 1e6cf29e6388..7f987e79337c 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi + - rockchip,rv1126-spi - const: rockchip,rk3066-spi reg: diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt deleted file mode 100644 index 5f4ed3e5c994..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt +++ /dev/null @@ -1,23 +0,0 @@ -Xilinx SPI controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a" -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. - -Optional properties: -- xlnx,num-ss-bits : Number of chip selects used. -- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified - -Example: - axi_quad_spi@41e00000 { - compatible = "xlnx,xps-spi-2.00.a"; - interrupt-parent = <&intc>; - interrupts = <0 31 1>; - reg = <0x41e00000 0x10000>; - xlnx,num-ss-bits = <0x1>; - xlnx,num-transfer-bits = <32>; - }; - diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml new file mode 100644 index 000000000000..593f7693bace --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - xlnx,xps-spi-2.00.a + - xlnx,xps-spi-2.00.b + - xlnx,axi-quad-spi-1.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + xlnx,num-ss-bits: + description: Number of chip selects used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + + xlnx,num-transfer-bits: + description: Number of bits per transfer. This will be 8 if not specified. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + default: 8 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi0: spi@41e00000 { + compatible = "xlnx,xps-spi-2.00.a"; + interrupt-parent = <&intc>; + interrupts = <0 31 1>; + reg = <0x41e00000 0x10000>; + xlnx,num-ss-bits = <0x1>; + xlnx,num-transfer-bits = <32>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt deleted file mode 100644 index 0f6d37ff541c..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt +++ /dev/null @@ -1,25 +0,0 @@ -Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings -------------------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,zynqmp-qspi-1.0". -- reg : Physical base address and size of GQSPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - -Example: - qspi: spi@ff0f0000 { - compatible = "xlnx,zynqmp-qspi-1.0"; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - interrupts = <0 15 4>; - interrupt-parent = <&gic>; - num-cs = <1>; - reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml new file mode 100644 index 000000000000..ea72c8001256 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-zynqmp-qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + const: xlnx,zynqmp-qspi-1.0 + + reg: + maxItems: 2 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>; + clock-names = "ref_clk", "pclk"; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + reg = <0x0 0xff0f0000 0x0 0x1000>, + <0x0 0xc0000000 0x0 0x8000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst index 104fa8fb2c17..8087780f1685 100644 --- a/Documentation/devicetree/bindings/submitting-patches.rst +++ b/Documentation/devicetree/bindings/submitting-patches.rst @@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches I. For patch submitters ======================= - 0) Normal patch submission rules from Documentation/process/submitting-patches.rst - applies. + 0) Normal patch submission rules from + Documentation/process/submitting-patches.rst applies. 1) The Documentation/ and include/dt-bindings/ portion of the patch should be a separate patch. The preferred subject prefix for binding patches is:: @@ -25,8 +25,8 @@ I. For patch submitters make dt_binding_check - See Documentation/devicetree/bindings/writing-schema.rst for more details about - schema and tools setup. + See Documentation/devicetree/bindings/writing-schema.rst for more details + about schema and tools setup. 3) DT binding files should be dual licensed. The preferred license tag is (GPL-2.0-only OR BSD-2-Clause). @@ -84,7 +84,8 @@ II. For kernel maintainers III. Notes ========== - 0) Please see :doc:`ABI` for details regarding devicetree ABI. + 0) Please see Documentation/devicetree/bindings/ABI.rst for details + regarding devicetree ABI. 1) This document is intended as a general familiarization with the process as decided at the 2013 Kernel Summit. When in doubt, the current word of the diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 8341e9d23c1e..37ac0a3ae3b4 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -73,6 +73,8 @@ properties: - dallas,ds4510 # Digital Thermometer and Thermostat - dallas,ds75 + # Delta Electronics DPS920AB 920W 54V Power Supply + - delta,dps920ab # 1/4 Brick DC/DC Regulated Power Module - delta,q54sj108a2 # Devantech SRF02 ultrasonic ranger in I2C mode @@ -103,6 +105,8 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 + # Monolithic Power Systems Inc. multi-phase controller mp2888 + - mps,mp2888 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index b868cefc7c55..9cb628ec960b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -830,6 +830,8 @@ patternProperties: description: Opal Kelly Incorporated "^opencores,.*": description: OpenCores.org + "^openembed,.*": + description: OpenEmbed "^openrisc,.*": description: OpenRISC.io "^option,.*": |