diff options
Diffstat (limited to 'Documentation/devicetree')
78 files changed, 2764 insertions, 524 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index f79683a628f0..b0a7454a70b8 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml# +$id: http://devicetree.org/schemas/arm/fsl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX Platforms Device Tree Bindings diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index e39d8f02e33c..b5bef5abc281 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/arm/qcom.yaml# +$id: http://devicetree.org/schemas/arm/qcom.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: QCOM device tree bindings diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml new file mode 100644 index 000000000000..4b8669f870ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic DDR Clock Controller Device Tree Bindings + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +properties: + compatible: + enum: + - amlogic,meson8-ddr-clkc + - amlogic,meson8b-ddr-clkc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + ddr_clkc: clock-controller@400 { + compatible = "amlogic,meson8-ddr-clkc"; + reg = <0x400 0x20>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 4d94091c1d2d..cc51e4746b3b 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -11,6 +11,11 @@ Required Properties: - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs - #clock-cells: should be 1. - #reset-cells: should be 1. +- clocks: list of clock phandles, one for each entry in clock-names +- clock-names: should contain the following: + * "xtal": the 24MHz system oscillator + * "ddr_pll": the DDR PLL clock + * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN) Parent node should have the following properties : - compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml index e63827399c1a..8559fe8f7efd 100644 --- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/clock/bitmain,bm1880-clk.yaml# +$id: http://devicetree.org/schemas/clock/bitmain,bm1880-clk.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Bitmain BM1880 Clock Controller diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml new file mode 100644 index 000000000000..c8350030b374 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,plldig.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding + +maintainers: + - Wen He <wen.he_1@nxp.com> + +description: | + NXP LS1028A has a clock domain PXLCLK0 used for the Display output + interface in the display core, as implemented in TSMC CLN28HPM PLL. + which generate and offers pixel clocks to Display. + +properties: + compatible: + const: fsl,ls1028a-plldig + + reg: + maxItems: 1 + + '#clock-cells': + const: 0 + + fsl,vco-hz: + description: Optional for VCO frequency of the PLL in Hertz. + The VCO frequency of this PLL cannot be changed during runtime + only at startup. Therefore, the output frequencies are very + limited and might not even closely match the requested frequency. + To work around this restriction the user may specify its own + desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +examples: + # Display PIXEL Clock node: + - | + dpclk: clock-display@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0xffff>; + #clock-cells = <0>; + clocks = <&osc_27m>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml new file mode 100644 index 000000000000..fc3bdfdc091a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SAI bitclock-as-a-clock binding + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + It is possible to use the BCLK pin of a SAI module as a generic clock + output. Some SoC are very constrained in their pin multiplexer + configuration. Eg. pins can only be changed groups. For example, on the + LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI, + the second pins are wasted. Using this binding it is possible to use the + clock of the second SAI as a MCLK clock for an audio codec, for example. + + This is a composite of a gated clock and a divider clock. + +properties: + compatible: + const: fsl,vf610-sai-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mclk: clock-mclk@f130080 { + compatible = "fsl,vf610-sai-clock"; + reg = <0x0 0xf130080 0x0 0x80>; + #clock-cells = <0>; + clocks = <&parentclk>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml index 622f3658bd9f..cd0b8a341321 100644 --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/clock/imx8mn-clock.yaml# +$id: http://devicetree.org/schemas/clock/imx8mn-clock.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX8M Nano Clock Control Module Binding diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml new file mode 100644 index 000000000000..89aee63c9019 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8mp-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Plus Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + NXP i.MX8M Plus clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: fsl,imx8mp-ccm + + reg: + maxItems: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h + for the full list of i.MX8M Plus clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + clk: clock-controller@30380000 { + compatible = "fsl,imx8mp-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, + <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", + "clk_ext2", "clk_ext3", "clk_ext4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml index 5cf0b811821e..f0b804a7f096 100644 --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/clock/milbeaut-clock.yaml# +$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Milbeaut SoCs Clock Controller Binding diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc.txt b/Documentation/devicetree/bindings/clock/qcom,dispcc.txt deleted file mode 100644 index d639e18d0b85..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc.txt +++ /dev/null @@ -1,19 +0,0 @@ -Qualcomm Technologies, Inc. Display Clock Controller Binding ------------------------------------------------------------- - -Required properties : - -- compatible : shall contain "qcom,sdm845-dispcc" -- reg : shall contain base register location and length. -- #clock-cells : from common clock binding, shall contain 1. -- #reset-cells : from common reset binding, shall contain 1. -- #power-domain-cells : from generic power domain binding, shall contain 1. - -Example: - dispcc: clock-controller@af00000 { - compatible = "qcom,sdm845-dispcc"; - reg = <0xaf00000 0x100000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml new file mode 100644 index 000000000000..17f87178f6b8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for APQ8064 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on APQ8064. + + See also: + - dt-bindings/clock/qcom,gcc-msm8960.h + - dt-bindings/reset/qcom,gcc-msm8960.h + +properties: + compatible: + const: qcom,gcc-apq8064 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + nvmem-cells: + minItems: 1 + maxItems: 2 + description: + Qualcomm TSENS (thermal sensor device) on some devices can + be part of GCC and hence the TSENS properties can also be part + of the GCC/clock-controller node. + For more details on the TSENS properties please refer + Documentation/devicetree/bindings/thermal/qcom-tsens.txt + + nvmem-cell-names: + minItems: 1 + maxItems: 2 + items: + - const: calib + - const: calib_backup + + '#thermal-sensor-cells': + const: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + - nvmem-cells + - nvmem-cell-names + - '#thermal-sensor-cells' + +examples: + - | + clock-controller@900000 { + compatible = "qcom,gcc-apq8064"; + reg = <0x00900000 0x4000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + #thermal-sensor-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml new file mode 100644 index 000000000000..89c6e070e7ac --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on IPQ8074. + + See also: + - dt-bindings/clock/qcom,gcc-ipq8074.h + +properties: + compatible: + const: qcom,gcc-ipq8074 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml new file mode 100644 index 000000000000..18e4e77b8cfa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8996 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8996. + + See also: + - dt-bindings/clock/qcom,gcc-msm8996.h + +properties: + compatible: + const: qcom,gcc-msm8996 + + clocks: + items: + - description: XO source + - description: Second XO source + - description: Sleep clock source + + clock-names: + items: + - const: cxo + - const: cxo2 + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x300000 0x90000>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml new file mode 100644 index 000000000000..1d3cae980471 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for MSM8998 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on MSM8998. + + See also: + - dt-bindings/clock/qcom,gcc-msm8998.h + +properties: + compatible: + const: qcom,gcc-msm8998 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: USB 3.0 phy pipe clock + - description: UFS phy rx symbol clock for pipe 0 + - description: UFS phy rx symbol clock for pipe 1 + - description: UFS phy tx symbol clock + - description: PCIE phy pipe clock + + clock-names: + items: + - const: xo + - const: sleep_clk + - const: usb3_pipe + - const: ufs_rx_symbol0 + - const: ufs_rx_symbol1 + - const: ufs_tx_symbol0 + - const: pcie0_pipe + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0xb0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "usb3_pipe", + "ufs_rx_symbol0", + "ufs_rx_symbol1", + "ufs_tx_symbol0", + "pcie0_pipe"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml new file mode 100644 index 000000000000..8cdece395eba --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on QCS404. + + See also: + - dt-bindings/clock/qcom,gcc-qcs404.h + +properties: + compatible: + const: qcom,gcc-qcs404 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-qcs404"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml new file mode 100644 index 000000000000..ee4f968e2909 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC7180 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,gcc-sc7180.h + +properties: + compatible: + const: qcom,gcc-sc7180 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc7180"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml new file mode 100644 index 000000000000..888e9a708390 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8150 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8150. + + See also: + - dt-bindings/clock/qcom,gcc-sm8150.h + +properties: + compatible: + const: qcom,gcc-sm8150 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index e73a56fb60ca..d18f8ab9eeee 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller Binding @@ -14,46 +14,42 @@ description: | Qualcomm global clock control module which supports the clocks, resets and power domains. + See also: + - dt-bindings/clock/qcom,gcc-apq8084.h + - dt-bindings/reset/qcom,gcc-apq8084.h + - dt-bindings/clock/qcom,gcc-ipq4019.h + - dt-bindings/clock/qcom,gcc-ipq6018.h + - dt-bindings/reset/qcom,gcc-ipq6018.h + - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + - dt-bindings/clock/qcom,gcc-msm8660.h + - dt-bindings/reset/qcom,gcc-msm8660.h + - dt-bindings/clock/qcom,gcc-msm8974.h + - dt-bindings/reset/qcom,gcc-msm8974.h + - dt-bindings/clock/qcom,gcc-msm8994.h + - dt-bindings/clock/qcom,gcc-mdm9615.h + - dt-bindings/reset/qcom,gcc-mdm9615.h + - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) + - dt-bindings/clock/qcom,gcc-sdm845.h + properties: - compatible : + compatible: enum: - - qcom,gcc-apq8064 - - qcom,gcc-apq8084 - - qcom,gcc-ipq8064 - - qcom,gcc-ipq4019 - - qcom,gcc-ipq8074 - - qcom,gcc-msm8660 - - qcom,gcc-msm8916 - - qcom,gcc-msm8960 - - qcom,gcc-msm8974 - - qcom,gcc-msm8974pro - - qcom,gcc-msm8974pro-ac - - qcom,gcc-msm8994 - - qcom,gcc-msm8996 - - qcom,gcc-msm8998 - - qcom,gcc-mdm9615 - - qcom,gcc-qcs404 - - qcom,gcc-sc7180 - - qcom,gcc-sdm630 - - qcom,gcc-sdm660 - - qcom,gcc-sdm845 - - qcom,gcc-sm8150 - - clocks: - minItems: 1 - maxItems: 3 - items: - - description: Board XO source - - description: Board active XO source - - description: Sleep clock source - - clock-names: - minItems: 1 - maxItems: 3 - items: - - const: bi_tcxo - - const: bi_tcxo_ao - - const: sleep_clk + - qcom,gcc-apq8084 + - qcom,gcc-ipq4019 + - qcom,gcc-ipq6018 + - qcom,gcc-ipq8064 + - qcom,gcc-msm8660 + - qcom,gcc-msm8916 + - qcom,gcc-msm8960 + - qcom,gcc-msm8974 + - qcom,gcc-msm8974pro + - qcom,gcc-msm8974pro-ac + - qcom,gcc-msm8994 + - qcom,gcc-mdm9615 + - qcom,gcc-sdm630 + - qcom,gcc-sdm660 + - qcom,gcc-sdm845 '#clock-cells': const: 1 @@ -67,31 +63,9 @@ properties: reg: maxItems: 1 - nvmem-cells: - minItems: 1 - maxItems: 2 - description: - Qualcomm TSENS (thermal sensor device) on some devices can - be part of GCC and hence the TSENS properties can also be part - of the GCC/clock-controller node. - For more details on the TSENS properties please refer - Documentation/devicetree/bindings/thermal/qcom-tsens.txt - - nvmem-cell-names: - minItems: 1 - maxItems: 2 - description: - Names for each nvmem-cells specified. - items: - - const: calib - - const: calib_backup - - 'thermal-sensor-cells': - const: 1 - protected-clocks: description: - Protected clock specifier list as per common clock binding + Protected clock specifier list as per common clock binding. required: - compatible @@ -100,32 +74,6 @@ required: - '#reset-cells' - '#power-domain-cells' -if: - properties: - compatible: - contains: - const: qcom,gcc-apq8064 - -then: - required: - - nvmem-cells - - nvmem-cell-names - - '#thermal-sensor-cells' - -else: - if: - properties: - compatible: - contains: - enum: - - qcom,gcc-sm8150 - - qcom,gcc-sc7180 - then: - required: - - clocks - - clock-names - - examples: # Example for GCC for MSM8960: - | @@ -136,53 +84,4 @@ examples: #reset-cells = <1>; #power-domain-cells = <1>; }; - - - # Example of GCC with TSENS properties: - - | - clock-controller@900000 { - compatible = "qcom,gcc-apq8064"; - reg = <0x00900000 0x4000>; - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - #thermal-sensor-cells = <1>; - }; - - # Example of GCC with protected-clocks properties: - - | - clock-controller@100000 { - compatible = "qcom,gcc-sdm845"; - reg = <0x100000 0x1f0000>; - protected-clocks = <187>, <188>, <189>, <190>, <191>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - # Example of GCC with clock node properties for SM8150: - - | - clock-controller@100000 { - compatible = "qcom,gcc-sm8150"; - reg = <0x00100000 0x1f0000>; - clocks = <&rpmhcc 0>, <&rpmhcc 1>, <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - # Example of GCC with clock nodes properties for SC7180: - - | - clock-controller@100000 { - compatible = "qcom,gcc-sc7180"; - reg = <0x100000 0x1f0000>; - clocks = <&rpmhcc 0>, <&rpmhcc 1>; - clock-names = "bi_tcxo", "bi_tcxo_ao"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt deleted file mode 100644 index 269afe8a757e..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt +++ /dev/null @@ -1,24 +0,0 @@ -Qualcomm Graphics Clock & Reset Controller Binding --------------------------------------------------- - -Required properties : -- compatible : shall contain "qcom,sdm845-gpucc" or "qcom,msm8998-gpucc" -- reg : shall contain base register location and length -- #clock-cells : from common clock binding, shall contain 1 -- #reset-cells : from common reset binding, shall contain 1 -- #power-domain-cells : from generic power domain binding, shall contain 1 -- clocks : shall contain the XO clock - shall contain the gpll0 out main clock (msm8998) -- clock-names : shall be "xo" - shall be "gpll0" (msm8998) - -Example: - gpucc: clock-controller@5090000 { - compatible = "qcom,sdm845-gpucc"; - reg = <0x5090000 0x9000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt deleted file mode 100644 index 8b0f7841af8d..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt +++ /dev/null @@ -1,28 +0,0 @@ -Qualcomm Multimedia Clock & Reset Controller Binding ----------------------------------------------------- - -Required properties : -- compatible : shall contain only one of the following: - - "qcom,mmcc-apq8064" - "qcom,mmcc-apq8084" - "qcom,mmcc-msm8660" - "qcom,mmcc-msm8960" - "qcom,mmcc-msm8974" - "qcom,mmcc-msm8996" - -- reg : shall contain base register location and length -- #clock-cells : shall contain 1 -- #reset-cells : shall contain 1 - -Optional properties : -- #power-domain-cells : shall contain 1 - -Example: - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml new file mode 100644 index 000000000000..85518494ce43 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Multimedia Clock & Reset Controller Binding + +maintainers: + - Jeffrey Hugo <jhugo@codeaurora.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm multimedia clock control module which supports the clocks, resets and + power domains. + +properties: + compatible : + enum: + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 + + clocks: + items: + - description: Board XO source + - description: Board sleep source + - description: Global PLL 0 clock + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + - description: DSI phy instance 1 dsi clock + - description: DSI phy instance 1 byte clock + - description: HDMI phy PLL clock + - description: DisplayPort phy PLL vco clock + - description: DisplayPort phy PLL link clock + + clock-names: + items: + - const: xo + - const: sleep + - const: gpll0 + - const: dsi0dsi + - const: dsi0byte + - const: dsi1dsi + - const: dsi1byte + - const: hdmipll + - const: dpvco + - const: dplink + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +if: + properties: + compatible: + contains: + const: qcom,mmcc-msm8998 + +then: + required: + - clocks + - clock-names + +examples: + # Example for MMCC for MSM8960: + - | + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml new file mode 100644 index 000000000000..7d853c1a85e5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on MSM8998. + + See also dt-bindings/clock/qcom,gpucc-msm8998.h. + +properties: + compatible: + const: qcom,msm8998-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source (gcc_gpu_gpll0_clk_src) + + clock-names: + items: + - const: xo + - const: gpll0 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + clock-controller@5065000 { + compatible = "qcom,msm8998-gpucc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0_OUT_MAIN>; + clock-names = "xo", "gpll0"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 94e2f14eb967..2cd158f13bab 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/clock/qcom,rpmhcc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. RPMh Clocks Bindings diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml new file mode 100644 index 000000000000..0429062f1585 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SC7180. + + See also dt-bindings/clock/qcom,dispcc-sc7180.h. + +properties: + compatible: + const: qcom,sc7180-dispcc + + clocks: + items: + - description: Board XO source + - description: GPLL0 source from GCC + - description: Byte clock from DSI PHY + - description: Pixel clock from DSI PHY + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: gcc_disp_gpll0_clk_src + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dp_phy_pll_link_clk + - const: dp_phy_pll_vco_div_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sc7180-dispcc"; + reg = <0 0x0af00000 0 0x200000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&dsi_phy 0>, + <&dsi_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml new file mode 100644 index 000000000000..5785192cc4be --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on SC7180. + + See also dt-bindings/clock/qcom,gpucc-sc7180.h. + +properties: + compatible: + const: qcom,sc7180-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + clock-names: + items: + - const: bi_tcxo + - const: gcc_gpu_gpll0_clk_src + - const: gcc_gpu_gpll0_div_clk_src + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@5090000 { + compatible = "qcom,sc7180-gpucc"; + reg = <0 0x05090000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml new file mode 100644 index 000000000000..31df901884ac --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Video Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm video clock control module which supports the clocks, resets and + power domains on SC7180. + + See also dt-bindings/clock/qcom,videocc-sc7180.h. + +properties: + compatible: + const: qcom,sc7180-videocc + + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ab00000 { + compatible = "qcom,sc7180-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml new file mode 100644 index 000000000000..89269ddfbdcd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller Binding for SDM845 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm display clock control module which supports the clocks, resets and + power domains on SDM845. + + See also dt-bindings/clock/qcom,dispcc-sdm845.h. + +properties: + compatible: + const: qcom,sdm845-dispcc + + # NOTE: sdm845.dtsi existed for quite some time and specified no clocks. + # The code had to use hardcoded mechanisms to find the input clocks. + # New dts files should have these clocks. + clocks: + items: + - description: Board XO source + - description: GPLL0 source from GCC + - description: GPLL0 div source from GCC + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + clock-names: + items: + - const: bi_tcxo + - const: gcc_disp_gpll0_clk_src + - const: gcc_disp_gpll0_div_clk_src + - const: dsi0_phy_pll_out_byteclk + - const: dsi0_phy_pll_out_dsiclk + - const: dsi1_phy_pll_out_byteclk + - const: dsi1_phy_pll_out_dsiclk + - const: dp_link_clk_divsel_ten + - const: dp_vco_divided_clk_src_mux + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml new file mode 100644 index 000000000000..bac04f1c5d79 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdm845-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding for SDM845 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on SDM845. + + See also dt-bindings/clock/qcom,gpucc-sdm845.h. + +properties: + compatible: + const: qcom,sdm845-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + clock-names: + items: + - const: bi_tcxo + - const: gcc_gpu_gpll0_clk_src + - const: gcc_gpu_gpll0_div_clk_src + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0 0x05090000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml new file mode 100644 index 000000000000..9d216c0f11d4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Video Clock & Reset Controller Binding for SDM845 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm video clock control module which supports the clocks, resets and + power domains on SDM845. + + See also dt-bindings/clock/qcom,videocc-sdm845.h. + +properties: + compatible: + const: qcom,sdm845-videocc + + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ab00000 { + compatible = "qcom,sdm845-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt deleted file mode 100644 index 8a8622c65c5a..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.txt +++ /dev/null @@ -1,18 +0,0 @@ -Qualcomm Video Clock & Reset Controller Binding ------------------------------------------------ - -Required properties : -- compatible : shall contain "qcom,sdm845-videocc" -- reg : shall contain base register location and length -- #clock-cells : from common clock binding, shall contain 1. -- #power-domain-cells : from generic power domain binding, shall contain 1. -- #reset-cells : from common reset binding, shall contain 1. - -Example: - videocc: clock-controller@ab00000 { - compatible = "qcom,sdm845-videocc"; - reg = <0xab00000 0x10000>; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index c7674d0267a3..f4d153f24a0f 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -19,7 +19,7 @@ Required Properties: - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C) - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M) - - "renesas,r8a774b1-cpg-mssr" for the r8a774a1 SoC (RZ/G2N) + - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N) - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E) - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index b8f91e444d2f..4e385508f516 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/clock/st,stm32mp1-rcc.yaml# +$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Reset Clock Controller Binding diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt index 48ee6991f2cc..18af6b9409e3 100644 --- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt +++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt @@ -16,18 +16,23 @@ For more information, please see the Linux clock framework binding at Documentation/devicetree/bindings/clock/clock-bindings.txt. Required properties : -- compatible : shall be "ti,clkctrl" +- compatible : shall be "ti,clkctrl" or a clock domain specific name: + "ti,clkctrl-l4-cfg" + "ti,clkctrl-l4-per" + "ti,clkctrl-l4-secure" + "ti,clkctrl-l4-wkup" - #clock-cells : shall contain 2 with the first entry being the instance offset from the clock domain base and the second being the clock index +- reg : clock registers Example: Clock controller node on omap 4430: &cm2 { l4per: cm@1400 { cm_l4per@0 { - cm_l4per_clkctrl: clk@20 { - compatible = "ti,clkctrl"; + cm_l4per_clkctrl: clock@20 { + compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; reg = <0x20 0x1b0>; #clock-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt index 10f7047755f3..21c002d28b9b 100644 --- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -43,7 +43,7 @@ Configuration of ATL instances: - aws : Audio word select signal selection }; -For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include +For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include file. Examples: @@ -83,7 +83,7 @@ atl: atl@4843c000 { clock-names = "fck"; }; -#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/clock/ti-dra7-atl.h> &atl { diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml new file mode 100644 index 000000000000..229af98b1d30 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Versal clock controller + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + - Jolly Shah <jolly.shah@xilinx.com> + - Rajan Vaja <rajan.vaja@xilinx.com> + +description: | + The clock controller is a hardware block of Xilinx versal clock tree. It + reads required input clock frequencies from the devicetree and acts as clock + provider for all clock consumers of PS clocks. + +select: false + +properties: + compatible: + const: xlnx,versal-clk + + "#clock-cells": + const: 1 + + clocks: + description: List of clock specifiers which are external input + clocks to the given clock controller. + items: + - description: reference clock + - description: alternate reference clock + - description: alternate reference clock for programmable logic + + clock-names: + items: + - const: ref + - const: alt_ref + - const: pl_alt_ref + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + versal_clk: clock-controller { + #clock-cells = <1>; + compatible = "xlnx,versal-clk"; + clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>; + clock-names = "ref", "alt_ref", "pl_alt_ref"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index ae04903f34bf..6a742a51e2f9 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml# +$id: http://devicetree.org/schemas/hwmon/adi,ltc2947.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices LTC2947 high precision power and energy monitor diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index e932d5aed02f..f0934b295edc 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml# +$id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD7124 ADC device driver diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 567a33a83dce..84d25bd39488 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7192.yaml# +$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD7192 ADC device driver diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 881059b80d61..0ce290473fb0 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#" +$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Microchip MCP3911 Dual channel analog front end (ADC) diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index c91407081aa5..acf36eef728b 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/st,stm32-dfsdm-adc.yaml# +$id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 DFSDM ADC device driver diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml index 13d005b68931..a285eaba7125 100644 --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#" +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml index 903475f52dbd..b98bf9363c8f 100644 --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/input/gpio-vibrator.yaml# +$id: http://devicetree.org/schemas/input/gpio-vibrator.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: GPIO vibrator diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 0f6950073d6f..0e57315e9cbd 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -36,6 +36,8 @@ Optional properties: - pinctrl-0: a phandle pointing to the pin settings for the control gpios + - wakeup-source: If present the device will act as wakeup-source + - threshold: allows setting the "click"-threshold in the range from 0 to 80. diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt deleted file mode 100644 index fc03ea4cf5ab..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ /dev/null @@ -1,50 +0,0 @@ -Device tree bindings for Goodix GT9xx series touchscreen controller - -Required properties: - - - compatible : Should be "goodix,gt1151" - or "goodix,gt5663" - or "goodix,gt5688" - or "goodix,gt911" - or "goodix,gt9110" - or "goodix,gt912" - or "goodix,gt927" - or "goodix,gt9271" - or "goodix,gt928" - or "goodix,gt967" - - reg : I2C address of the chip. Should be 0x5d or 0x14 - - interrupts : Interrupt to which the chip is connected - -Optional properties: - - - irq-gpios : GPIO pin used for IRQ. The driver uses the - interrupt gpio pin as output to reset the device. - - reset-gpios : GPIO pin used for reset - - AVDD28-supply : Analog power supply regulator on AVDD28 pin - - VDDIO-supply : GPIO power supply regulator on VDDIO pin - - touchscreen-inverted-x - - touchscreen-inverted-y - - touchscreen-size-x - - touchscreen-size-y - - touchscreen-swapped-x-y - -The touchscreen-* properties are documented in touchscreen.txt in this -directory. - -Example: - - i2c@00000000 { - /* ... */ - - gt928@5d { - compatible = "goodix,gt928"; - reg = <0x5d>; - interrupt-parent = <&gpio>; - interrupts = <0 0>; - - irq-gpios = <&gpio1 0 0>; - reset-gpios = <&gpio1 1 0>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml new file mode 100644 index 000000000000..d7c3262b2494 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix GT9xx series touchscreen controller Bindings + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - goodix,gt1151 + - goodix,gt5663 + - goodix,gt5688 + - goodix,gt911 + - goodix,gt9110 + - goodix,gt912 + - goodix,gt927 + - goodix,gt9271 + - goodix,gt928 + - goodix,gt967 + + reg: + enum: [ 0x5d, 0x14 ] + + interrupts: + maxItems: 1 + + irq-gpios: + description: GPIO pin used for IRQ. + The driver uses the interrupt gpio pin as + output to reset the device. + maxItems: 1 + + reset-gpios: + maxItems: 1 + + AVDD28-supply: + description: Analog power supply regulator on AVDD28 pin + + VDDIO-supply: + description: GPIO power supply regulator on VDDIO pin + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: +- | + i2c@00000000 { + #address-cells = <1>; + #size-cells = <0>; + gt928@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <0 0>; + irq-gpios = <&gpio1 0 0>; + reset-gpios = <&gpio1 1 0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index 8641a2d70851..e1adb902d503 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -1,39 +1 @@ -General Touchscreen Properties: - -Optional properties for Touchscreens: - - touchscreen-min-x : minimum x coordinate reported (0 if not set) - - touchscreen-min-y : minimum y coordinate reported (0 if not set) - - touchscreen-size-x : horizontal resolution of touchscreen - (maximum x coordinate reported + 1) - - touchscreen-size-y : vertical resolution of touchscreen - (maximum y coordinate reported + 1) - - touchscreen-max-pressure : maximum reported pressure (arbitrary range - dependent on the controller) - - touchscreen-min-pressure : minimum pressure on the touchscreen to be - achieved in order for the touchscreen - driver to report a touch event. - - touchscreen-fuzz-x : horizontal noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-pressure : pressure noise value of the absolute input - device (arbitrary range dependent on the - controller) - - touchscreen-average-samples : Number of data samples which are averaged - for each read (valid values dependent on the - controller) - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - Swapping is done after inverting the axis - - touchscreen-x-mm : horizontal length in mm of the touchscreen - - touchscreen-y-mm : vertical length in mm of the touchscreen - -Deprecated properties for Touchscreens: - - x-size : deprecated name for touchscreen-size-x - - y-size : deprecated name for touchscreen-size-y - - moving-threshold : deprecated name for a combination of - touchscreen-fuzz-x and touchscreen-fuzz-y - - contact-threshold : deprecated name for touchscreen-fuzz-pressure - - x-invert : deprecated name for touchscreen-inverted-x - - y-invert : deprecated name for touchscreen-inverted-y +See touchscreen.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml new file mode 100644 index 000000000000..d7dac16a3960 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common touchscreen Bindings + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +properties: + touchscreen-min-x: + description: minimum x coordinate reported + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + touchscreen-min-y: + description: minimum y coordinate reported + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + touchscreen-size-x: + description: horizontal resolution of touchscreen (maximum x coordinate reported + 1) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-size-y: + description: vertical resolution of touchscreen (maximum y coordinate reported + 1) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-max-pressure: + description: maximum reported pressure (arbitrary range dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-min-pressure: + description: minimum pressure on the touchscreen to be achieved in order for the + touchscreen driver to report a touch event. + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-x: + description: horizontal noise value of the absolute input device (in pixels) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-y: + description: vertical noise value of the absolute input device (in pixels) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-pressure: + description: pressure noise value of the absolute input device (arbitrary range + dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-average-samples: + description: Number of data samples which are averaged for each read (valid values + dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-inverted-x: + description: X axis is inverted + type: boolean + + touchscreen-inverted-y: + description: Y axis is inverted + type: boolean + + touchscreen-swapped-x-y: + description: X and Y axis are swapped + Swapping is done after inverting the axis + type: boolean + + touchscreen-x-mm: + description: horizontal length in mm of the touchscreen + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-y-mm: + description: vertical length in mm of the touchscreen + $ref: /schemas/types.yaml#/definitions/uint32 + +dependencies: + touchscreen-size-x: [ touchscreen-size-y ] + touchscreen-size-y: [ touchscreen-size-x ] + touchscreen-x-mm: [ touchscreen-y-mm ] + touchscreen-y-mm: [ touchscreen-x-mm ] diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt index 5a8b4624defc..3c36334e4f94 100644 --- a/Documentation/devicetree/bindings/iommu/iommu.txt +++ b/Documentation/devicetree/bindings/iommu/iommu.txt @@ -86,6 +86,12 @@ have a means to turn off translation. But it is invalid in such cases to disable the IOMMU's device tree node in the first place because it would prevent any driver from properly setting up the translations. +Optional properties: +-------------------- +- pasid-num-bits: Some masters support multiple address spaces for DMA, by + tagging DMA transactions with an address space identifier. By default, + this is 0, which means that the device only has one address space. + Notes: ====== diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt index 4c2d923f8758..501468aa4d38 100644 --- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -18,6 +18,10 @@ Required properties: Optional properties: - enable-gpios : gpio pin to enable/disable the device. - vled-supply : LED supply + - ti,ovp-microvolt: Overvoltage protection in + micro-volt, can be 17000000, 21000000, 25000000 or + 29000000. If ti,ovp-microvolt is not specified it + defaults to 29000000. Required child properties: - reg : 0 - Will enable all LED sync paths @@ -31,6 +35,8 @@ Optional child properties: - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) - linux,default-trigger : see Documentation/devicetree/bindings/leds/common.txt + - led-max-microamp : + see Documentation/devicetree/bindings/leds/common.txt Example: @@ -44,12 +50,14 @@ led-controller@36 { enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + ti,ovp-microvolt = <29000000>; led@0 { reg = <0>; function = LED_FUNCTION_BACKLIGHT; color = <LED_COLOR_ID_WHITE>; linux,default-trigger = "backlight"; + led-max-microamp = <20000>; }; } diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml new file mode 100644 index 000000000000..b50f4bcc98f1 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit LED driver + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD71828 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml. + + The LED controller is represented as a sub-node of the PMIC node on the device + tree. + + The device has two LED outputs referred as GRNLED and AMBLED in data-sheet. + +select: false + +properties: + compatible: + const: rohm,bd71828-leds + +patternProperties: + "^led-[1-2]$": + type: object + description: + Properties for a single LED. + properties: + #allOf: + #- $ref: "common.yaml#" + rohm,led-compatible: + description: LED identification string + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - bd71828-ambled + - bd71828-grnled + function: + description: + Purpose of LED as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/string" + color: + description: + LED colour as defined in dt-bindings/leds/common.h + $ref: "/schemas/types.yaml#/definitions/uint32" + +required: + - compatible diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt index 0278482af65c..beec612dbe6a 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt @@ -21,10 +21,11 @@ platforms. Usage: required Value type: <prop-encoded-array> Definition: must specify the base address and size of the global block + - clocks: - Usage: required if #clocks-cells property is present - Value type: <phandle> - Definition: phandle to the input PLL, which feeds the APCS mux/divider + Usage: required if #clock-names property is present + Value type: <phandle array> + Definition: phandles to the two parent clocks of the clock driver. - #mbox-cells: Usage: required @@ -36,6 +37,12 @@ platforms. Value type: <u32> Definition: as described in clock.txt, must be 0 +- clock-names: + Usage: required if the platform data based clock driver needs to + retrieve the parent clock names from device tree. + This will requires two mandatory clocks to be defined. + Value type: <string-array> + Definition: must be "pll" and "aux" = EXAMPLE The following example describes the APCS HMSS found in MSM8996 and part of the @@ -68,3 +75,14 @@ Below is another example of the APCS binding on MSM8916 platforms: clocks = <&a53pll>; #clock-cells = <0>; }; + +Below is another example of the APCS binding on QCS404 platforms: + + apcs_glb: mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 0f6374ceaa69..9af873b43acd 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -16,7 +16,15 @@ description: |- properties: compatible: - const: allwinner,sun7i-a20-csi0 + oneOf: + - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi0 + - items: + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 + - items: + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1 @@ -25,12 +33,16 @@ properties: maxItems: 1 clocks: + minItems: 2 + maxItems: 3 items: - description: The CSI interface clock - description: The CSI ISP clock - description: The CSI DRAM clock clock-names: + minItems: 2 + maxItems: 3 items: - const: bus - const: isp diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml new file mode 100644 index 000000000000..335717e15970 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Video Decoder + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Maxime Jourdan <mjourdan@baylibre.com> + +description: | + The video decoding IP lies within the DOS memory region, + except for the hardware bitstream parser that makes use of an undocumented + region. + + It makes use of the following blocks: + - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks + then feed from this VIFIFO. + - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. + - VDEC_HEVC can decode HEVC and VP9. + + Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run + concurrently. + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec + - enum: + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: vdec + - const: esparser + + reg: + minItems: 2 + + reg-names: + items: + - const: dos + - const: esparser + + resets: + maxItems: 1 + + reset-names: + items: + - const: esparser + + clocks: + minItems: 4 + maxItems: 5 + + clock-names: + minItems: 4 + maxItems: 5 + items: + - const: dos_parser + - const: dos + - const: vdec_1 + - const: vdec_hevc + - const: vdec_hevcf + + amlogic,ao-sysctrl: + description: should point to the AOBUS sysctrl node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + amlogic,canvas: + description: should point to a canvas provider node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + +allOf: + - if: + properties: + compatible: + contains: + enum: + - amlogic,gx-vdec + + then: + properties: + clock-names: + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-vdec + - amlogic,sm1-vdec + + then: + properties: + clock-names: + minItems: 5 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - amlogic,ao-sysctrl + - amlogic,canvas + +examples: + - | + vdec: video-decoder@c8820000 { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>; + reg-names = "dos", "esparser"; + interrupts = <44>, <32>; + interrupt-names = "vdec", "esparser"; + clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset_parser>; + reset-names = "esparser"; + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt deleted file mode 100644 index 9b6aace86ca7..000000000000 --- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt +++ /dev/null @@ -1,72 +0,0 @@ -Amlogic Video Decoder -================================ - -The video decoding IP lies within the DOS memory region, -except for the hardware bitstream parser that makes use of an undocumented -region. - -It makes use of the following blocks: - -- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks -then feed from this VIFIFO. -- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. -- VDEC_HEVC can decode HEVC and VP9. - -Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run -concurrently. - -Device Tree Bindings: ---------------------- - -VDEC: Video Decoder --------------------------- - -Required properties: -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,gxbb-vdec" - - GXL (S905X, S905D) : "amlogic,gxl-vdec" - - GXM (S912) : "amlogic,gxm-vdec" - followed by the common "amlogic,gx-vdec" -- reg: base address and size of he following memory-mapped regions : - - dos - - esparser -- reg-names: should contain the names of the previous memory regions -- interrupts: should contain the following IRQs: - - vdec - - esparser -- interrupt-names: should contain the names of the previous interrupts -- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node -- amlogic,canvas: should point to a canvas provider node -- clocks: should contain the following clocks : - - dos_parser - - dos - - vdec_1 - - vdec_hevc -- clock-names: should contain the names of the previous clocks -- resets: should contain the parser reset -- reset-names: should be "esparser" - -Example: - -vdec: video-codec@c8820000 { - compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; - reg = <0x0 0xc8820000 0x0 0x10000>, - <0x0 0xc110a580 0x0 0xe4>; - reg-names = "dos", "esparser"; - - interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&sysctrl_AO>; - amlogic,canvas = <&canvas>; - - clocks = <&clkc CLKID_DOS_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>; - clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; - - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; -}; diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt index 13ebc0fac9ea..ca4cf774662e 100644 --- a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt +++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt @@ -1,7 +1,8 @@ Device-Tree bindings for hix5hd2 ir IP Required properties: - - compatible: Should contain "hisilicon,hix5hd2-ir". + - compatible: Should contain "hisilicon,hix5hd2-ir", or: + - "hisilicon,hi3796cv300-ir" for Hi3796CV300 IR device. - reg: Base physical address of the controller and length of memory mapped region. - interrupts: interrupt-specifier for the sole interrupt generated by diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt index e30b0d4eefdd..5eefd62ac5c5 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.txt +++ b/Documentation/devicetree/bindings/media/renesas,vin.txt @@ -13,6 +13,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - "renesas,vin-r8a7743" for the R8A7743 device - "renesas,vin-r8a7744" for the R8A7744 device - "renesas,vin-r8a7745" for the R8A7745 device + - "renesas,vin-r8a77470" for the R8A77470 device - "renesas,vin-r8a774a1" for the R8A774A1 device - "renesas,vin-r8a774b1" for the R8A774B1 device - "renesas,vin-r8a774c0" for the R8A774C0 device @@ -41,9 +42,6 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - interrupts: the interrupt for the device - clocks: Reference to the parent clock -Additionally, an alias named vinX will need to be created to specify -which video input device this is. - The per-board settings for Gen2 and RZ/G1 platforms: - port - sub-node describing a single endpoint connected to the VIN diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml new file mode 100644 index 000000000000..1ea784179536 --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,cal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings + +maintainers: + - Benoit Parrot <bparrot@ti.com> + +description: |- + The Camera Adaptation Layer (CAL) is a key component for image capture + applications. The capture module provides the system interface and the + processing capability to connect CSI2 image-sensor modules to the + DRA72x device. + + CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes + should contain a 'port' child node with child 'endpoint' node. Please + refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + +properties: + compatible: + enum: + # for DRA72 controllers + - ti,dra72-cal + # for DRA72 controllers pre ES2.0 + - ti,dra72-pre-es2-cal + # for DRA76 controllers + - ti,dra76-cal + # for AM654 controllers + - ti,am654-cal + + reg: + minItems: 2 + items: + - description: The CAL main register region + - description: The RX Core0 (DPHY0) register region + - description: The RX Core1 (DPHY1) register region + + reg-names: + minItems: 2 + items: + - const: cal_top + - const: cal_rx_core0 + - const: cal_rx_core1 + + interrupts: + maxItems: 1 + + ti,camerrx-control: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + phandle to the device control module and offset to the + control_camerarx_core register + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + description: + List of phandle and PM domain specifier as documented in + Documentation/devicetree/bindings/power/power_domain.txt + maxItems: 1 + + # See ./video-interfaces.txt for details + ports: + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + properties: + reg: + const: 0 + description: CSI2 Port #0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + properties: + reg: + const: 1 + description: CSI2 Port #1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + +required: + - compatible + - reg + - reg-names + - interrupts + - ti,camerrx-control + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cal: cal@4845b000 { + compatible = "ti,dra72-cal"; + reg = <0x4845B000 0x400>, + <0x4845B800 0x40>, + <0x4845B900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0xE94>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + + i2c5: i2c@4807c000 { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt deleted file mode 100644 index ae9b52f37576..000000000000 --- a/Documentation/devicetree/bindings/media/ti-cal.txt +++ /dev/null @@ -1,72 +0,0 @@ -Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) ------------------------------------------------------- - -The Camera Adaptation Layer (CAL) is a key component for image capture -applications. The capture module provides the system interface and the -processing capability to connect CSI2 image-sensor modules to the -DRA72x device. - -Required properties: -- compatible: must be "ti,dra72-cal" -- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX - control address space -- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control - registers -- interrupts: should contain IRQ line for the CAL; - -CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes -should contain a 'port' child node with child 'endpoint' node. Please -refer to the bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - cal: cal@4845b000 { - compatible = "ti,dra72-cal"; - ti,hwmods = "cal"; - reg = <0x4845B000 0x400>, - <0x4845B800 0x40>, - <0x4845B900 0x40>, - <0x4A002e94 0x4>; - reg-names = "cal_top", - "cal_rx_core0", - "cal_rx_core1", - "camerrx_control"; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - csi2_0: port@0 { - reg = <0>; - endpoint { - slave-mode; - remote-endpoint = <&ar0330_1>; - }; - }; - csi2_1: port@1 { - reg = <1>; - }; - }; - }; - - i2c5: i2c@4807c000 { - ar0330@10 { - compatible = "ti,ar0330"; - reg = <0x10>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ar0330_1: endpoint { - reg = <0>; - clock-lanes = <1>; - data-lanes = <0 2 3 4>; - remote-endpoint = <&csi2_0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index b6bc30d7777e..5c6eabeed341 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -1,7 +1,7 @@ * AB8500 Multi-Functional Device (MFD) Required parent device properties: -- compatible : contains "stericsson,ab8500"; +- compatible : contains "stericsson,ab8500" or "stericsson,ab8505"; - interrupts : contains the IRQ line for the AB8500 - interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain) - #interrupt-cells : should be 2, for 2-cell format @@ -49,11 +49,13 @@ ab8500-charger : : vddadc : Charger interface : CH_WD_EXP : : Charger watchdog detected ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : -ab8500-gpio : : : GPIO Controller +ab8500-gpio : : : GPIO Controller (AB8500) +ab8505-gpio : : : GPIO Controller (AB8505) ab8500-ponkey : ONKEY_DBF : : Power-on Key ONKEY_DBR : : ab8500-pwm : : : Pulse Width Modulator -ab8500-regulator : : : Regulators +ab8500-regulator : : : Regulators (AB8500) +ab8505-regulator : : : Regulators (AB8505) ab8500-rtc : 60S : : Real Time Clock : ALARM : : ab8500-sysctrl : : : System Control diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..a09133066aff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,13 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" - The compatible <chip> indicated will be the first SoC to support an - additional mode or an USART new feature. - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" +- compatible: Should be one of the following: + - "atmel,at91rm9200-usart" + - "atmel,at91sam9260-usart" + - "microchip,sam9x60-usart" + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" + - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index bc4b59de6a55..857af982c88f 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock da9062-onkey : : On Key da9062-watchdog : : Watchdog Timer da9062-thermal : : Thermal +da9062-gpio : : GPIOs The DA9061 PMIC consists of: @@ -38,6 +39,15 @@ Required properties: See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for further information on IRQ bindings. +Optional properties: + +- gpio-controller : Marks the device as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify the gpio polarity. + +See Documentation/devicetree/bindings/gpio/gpio.txt for further information on +GPIO bindings. + Sub-nodes: - regulators : This node defines the settings for the LDOs and BUCKs. diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt index fc6f0f4e8beb..92070b346756 100644 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ b/Documentation/devicetree/bindings/mfd/max14577.txt @@ -5,6 +5,8 @@ Battery Charger and SFOUT LDO output for powering USB devices. It is interfaced to host controller using I2C. MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. +For the description of Fuel Gauge low SOC alert interrupt see: +../power/supply/max17040_battery.txt Required properties: diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml new file mode 100644 index 000000000000..4fbb9e734284 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD71828GW is a single-chip power management IC for battery-powered portable + devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA + single-cell linear charger. Also included is a Coulomb counter, a real-time + clock (RTC), and a 32.768 kHz clock gate. + +properties: + compatible: + const: rohm,bd71828 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If some + other but 30MOhm resistor is used the resistance value should be given + here in Ohms. + + regulators: + $ref: ../regulator/rohm,bd71828-regulator.yaml + description: + List of child nodes that specify the regulators. + + leds: + $ref: ../leds/rohm,bd71828-leds.yaml + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71828"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71828-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <0 1>, <2 1>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2000000>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + }; + + leds { + compatible = "rohm,bd71828-leds"; + + led-1 { + rohm,led-compatible = "bd71828-grnled"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + led-2 { + rohm,led-compatible = "bd71828-ambled"; + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_AMBER>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt index 93602c7a19c8..dc448a9d5b4d 100644 --- a/Documentation/devicetree/bindings/mfd/tps6105x.txt +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -7,11 +7,56 @@ Required properties: - compatible: "ti,tps61050" or "ti,tps61052" - reg: Specifies the I2C slave address -Example: +Optional sub-node: + +This subnode selects the chip's operational mode. +There can be at most one single available subnode. + +- regulator: presence of this sub-node puts the chip in regulator mode. + see ../regulator/regulator.yaml + +- led: presence of this sub-node puts the chip in led mode. + Optional properties: + - function : see ../leds/common.txt + - color : see ../leds/common.txt + - label : see ../leds/common.txt + (deprecated) + +Example (GPIO operation only): + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; + +Example (GPIO + regulator operation): i2c0 { tps61052@33 { compatible = "ti,tps61052"; reg = <0x33>; + + regulator { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +Example (GPIO + led operation): + +#include <dt-bindings/leds/common.h> + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + + led { + color = <LED_COLOR_ID_WHITE>; + }; }; }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..77d3e81a437b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - reg + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml new file mode 100644 index 000000000000..48a98dae00de --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe RC controller on Intel Gateway SoCs + +maintainers: + - Dilip Kota <eswara.kota@linux.intel.com> + +properties: + compatible: + items: + - const: intel,lgm-pcie + - const: snps,dw-pcie + + device_type: + const: pci + + "#address-cells": + const: 3 + + "#size-cells": + const: 2 + + reg: + items: + - description: Controller control and status registers. + - description: PCIe configuration registers. + - description: Controller application registers. + + reg-names: + items: + - const: dbi + - const: config + - const: app + + ranges: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie + + reset-gpios: + maxItems: 1 + + linux,pci-domain: true + + num-lanes: + maximum: 2 + description: Number of lanes to use for this port. + + '#interrupt-cells': + const: 1 + + interrupt-map-mask: + description: Standard PCI IRQ mapping properties. + + interrupt-map: + description: Standard PCI IRQ mapping properties. + + max-link-speed: + description: Specify PCI Gen for link capability. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 3, 4 ] + - default: 1 + + bus-range: + description: Range of bus numbers associated with this controller. + + reset-assert-ms: + description: | + Delay after asserting reset to the PCIe device. + maximum: 500 + default: 100 + +required: + - compatible + - device_type + - "#address-cells" + - "#size-cells" + - reg + - reg-names + - ranges + - resets + - clocks + - phys + - phy-names + - reset-gpios + - '#interrupt-cells' + - interrupt-map + - interrupt-map-mask + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + pcie10: pcie@d0e00000 { + compatible = "intel,lgm-pcie", "snps,dw-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0xd0e00000 0x1000>, + <0xd2000000 0x800000>, + <0xd0a41000 0x1000>; + reg-names = "dbi", "config", "app"; + linux,pci-domain = <0>; + max-link-speed = <4>; + bus-range = <0x00 0x08>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &ioapic1 27 1>, + <0 0 0 2 &ioapic1 28 1>, + <0 0 0 3 &ioapic1 29 1>, + <0 0 0 4 &ioapic1 30 1>; + ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>; + resets = <&rcu0 0x50 0>; + clocks = <&cgu0 120>; + phys = <&cb0phy0>; + phy-names = "pcie"; + reset-assert-ms = <500>; + reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index ada80b01bf0c..981b4de12807 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -11,6 +11,7 @@ - "qcom,pcie-ipq4019" for ipq4019 - "qcom,pcie-ipq8074" for ipq8074 - "qcom,pcie-qcs404" for qcs404 + - "qcom,pcie-sdm845" for sdm845 - reg: Usage: required @@ -126,6 +127,18 @@ - "master_bus" AXI Master clock - "slave_bus" AXI Slave clock +-clock-names: + Usage: required for sdm845 + Value type: <stringlist> + Definition: Should contain the following entries + - "aux" Auxiliary clock + - "cfg" Configuration clock + - "bus_master" Master AXI clock + - "bus_slave" Slave AXI clock + - "slave_q2a" Slave Q2A clock + - "tbu" PCIe TBU clock + - "pipe" PIPE clock + - resets: Usage: required Value type: <prop-encoded-array> @@ -188,6 +201,12 @@ - "pwr" PWR reset - "ahb" AHB reset +- reset-names: + Usage: required for sdm845 + Value type: <stringlist> + Definition: Should contain the following entries + - "pci" PCIe core reset + - power-domains: Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index ff7959c21af0..0ccee64c6962 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -45,8 +45,10 @@ examples: sysconf: chiptop@e0200000 { compatible = "intel,lgm-syscon", "syscon"; reg = <0xe0200000 0x100>; + #address-cells = <1>; + #size-cells = <1>; - emmc-phy: emmc-phy@a8 { + emmc_phy: emmc-phy@a8 { compatible = "intel,lgm-emmc-phy"; reg = <0x00a8 0x10>; clocks = <&emmc>; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index 1b06f86a7091..a1b8a482f873 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -3,7 +3,7 @@ Freescale MXS PWM controller Required properties: - compatible: should be "fsl,imx23-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format. - fsl,pwm-number: the number of PWM devices @@ -12,6 +12,6 @@ Example: pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; - #pwm-cells = <2>; + #pwm-cells = <3>; fsl,pwm-number = <8>; }; diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt new file mode 100644 index 000000000000..3ba668bab14b --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt @@ -0,0 +1,36 @@ +Mediatek SCP Bindings +---------------------------------------- + +This binding provides support for ARM Cortex M4 Co-processor found on some +Mediatek SoCs. + +Required properties: +- compatible Should be "mediatek,mt8183-scp" +- reg Should contain the address ranges for the two memory + regions, SRAM and CFG. +- reg-names Contains the corresponding names for the two memory + regions. These should be named "sram" & "cfg". +- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) +- clock-names Contains the corresponding name for the clock. This + should be named "main". + +Subnodes +-------- + +Subnodes of the SCP represent rpmsg devices. The names of the devices are not +important. The properties of these nodes are defined by the individual bindings +for the rpmsg devices - but must contain the following property: + +- mtk,rpmsg-name Contains the name for the rpmsg device. Used to match + the subnode to rpmsg device announced by SCP. + +Example: + + scp: scp@10500000 { + compatible = "mediatek,mt8183-scp"; + reg = <0 0x10500000 0 0x80000>, + <0 0x105c0000 0 0x5000>; + reg-names = "sram", "cfg"; + clocks = <&infracfg CLK_INFRA_SCPSYS>; + clock-names = "main"; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt index 292dfda9770d..9938918b2fea 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt @@ -10,11 +10,17 @@ on the Qualcomm ADSP Hexagon core. "qcom,msm8974-adsp-pil" "qcom,msm8996-adsp-pil" "qcom,msm8996-slpi-pil" + "qcom,msm8998-adsp-pas" + "qcom,msm8998-slpi-pas" "qcom,qcs404-adsp-pas" "qcom,qcs404-cdsp-pas" "qcom,qcs404-wcss-pas" "qcom,sdm845-adsp-pas" "qcom,sdm845-cdsp-pas" + "qcom,sm8150-adsp-pas" + "qcom,sm8150-cdsp-pas" + "qcom,sm8150-mpss-pas" + "qcom,sm8150-slpi-pas" - interrupts-extended: Usage: required @@ -29,12 +35,18 @@ on the Qualcomm ADSP Hexagon core. qcom,msm8974-adsp-pil: qcom,msm8996-adsp-pil: qcom,msm8996-slpi-pil: + qcom,msm8998-adsp-pas: + qcom,msm8998-slpi-pas: qcom,qcs404-adsp-pas: qcom,qcs404-cdsp-pas: qcom,sdm845-adsp-pas: qcom,sdm845-cdsp-pas: + qcom,sm8150-adsp-pas: + qcom,sm8150-cdsp-pas: + qcom,sm8150-slpi-pas: must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,qcs404-wcss-pas: + qcom,sm8150-mpss-pas: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -67,6 +79,38 @@ on the Qualcomm ADSP Hexagon core. Definition: reference to the px regulator to be held on behalf of the booting Hexagon core +- power-domains: + Usage: required + Value type: <phandle> + Definition: reference to power-domains that match the power-domain-names + +- power-domain-names: + Usage: required + Value type: <stringlist> + Definition: The power-domains needed depend on the compatible string: + qcom,msm8974-adsp-pil: + qcom,msm8996-adsp-pil: + qcom,msm8998-adsp-pas: + must be "cx" + qcom,msm8996-slpi-pil: + must be "ss_cx" + qcom,msm8998-slpi-pas: + must be "ssc_cx" + qcom,qcs404-adsp-pas: + must be "lpi_cx" + qcom,qcs404-cdsp-pas: + qcom,qcs404-wcss-pas: + must be "mx" + qcom,sdm845-adsp-pas: + qcom,sdm845-cdsp-pas: + qcom,sm8150-adsp-pas: + qcom,sm8150-cdsp-pas: + must be "cx", "load_state" + qcom,sm8150-mpss-pas: + must be "cx", "load_state", "mss" + qcom,sm8150-slpi-pas: + must be "lcx", "lmx", "load_state" + - memory-region: Usage: required Value type: <phandle> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index c416746f93cf..88dfa3fc15f7 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -13,6 +13,7 @@ on the Qualcomm Hexagon core. "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" "qcom,msm8998-mss-pil" + "qcom,sc7180-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -43,6 +44,7 @@ on the Qualcomm Hexagon core. must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: + qcom,sc7180-mss-pil: qcom,sdm845-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -75,6 +77,9 @@ on the Qualcomm Hexagon core. qcom,msm8998-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "qdss" + qcom,sc7180-mss-pil: + must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", + "mss_crypto", "mss_nav", "nav" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -86,7 +91,7 @@ on the Qualcomm Hexagon core. reference to the list of 3 reset-controllers for the wcss sub-system reference to the list of 2 reset-controllers for the modem - sub-system on SDM845 SoCs + sub-system on SC7180, SDM845 SoCs - reset-names: Usage: required @@ -95,7 +100,7 @@ on the Qualcomm Hexagon core. must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system must be "mss_restart", "pdc_reset" for the modem - sub-system on SDM845 SoCs + sub-system on SC7180, SDM845 SoCs For the compatible strings below the following supplies are required: "qcom,q6v5-pil" @@ -144,6 +149,7 @@ For the compatible string below the following supplies are required: qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: must be "cx", "mx" + qcom,sc7180-mss-pil: qcom,sdm845-mss-pil: must be "cx", "mx", "mss", "load_state" @@ -165,6 +171,19 @@ For the compatible string below the following supplies are required: by the three offsets within syscon for q6, modem and nc halt registers. +For the compatible strings below the following phandle references are required: + "qcom,sc7180-mss-pil" +- qcom,halt-nav-regs: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to a list of 2 phandles with one offset each for + the modem sub-system running on SC7180 SoC. The first + phandle reference is to the mss clock node followed by the + offset within register space for nav halt register. The + second phandle reference is to a syscon representing TCSR + followed by the offset within syscon for conn_box_spare0 + register. + = SUBNODES: The Hexagon node must contain two subnodes, named "mba" and "mpss" representing the memory regions used by the Hexagon firmware. Each sub-node must contain: diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt deleted file mode 100644 index 5d3791e789c6..000000000000 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ /dev/null @@ -1,17 +0,0 @@ -Atmel AT91RM9200 Real Time Clock - -Required properties: -- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: rtc alarm/event interrupt -- clocks: phandle to input clock. - -Example: - -rtc@fffffe00 { - compatible = "atmel,at91rm9200-rtc"; - reg = <0xfffffe00 0x100>; - interrupts = <1 4 7>; - clocks = <&clk32k>; -}; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml new file mode 100644 index 000000000000..02bbfe726c62 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/atmel,at91rm9200-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel AT91 RTC Device Tree Bindings + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + enum: + - atmel,at91rm9200-rtc + - atmel,at91sam9x5-rtc + - atmel,sama5d4-rtc + - atmel,sama5d2-rtc + - microchip,sam9x60-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + rtc@fffffe00 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffe00 0x100>; + interrupts = <1 4 7>; + clocks = <&clk32k>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt index 411375eac54d..0654380eb751 100644 --- a/Documentation/devicetree/bindings/spi/fsl-spi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt @@ -15,13 +15,13 @@ Required properties: - clock-frequency : input clock frequency to non FSL_SOC cores Optional properties: -- gpios : specifies the gpio pins to be used for chipselects. +- cs-gpios : specifies the gpio pins to be used for chipselects. The gpios will be referred to as reg = <index> in the SPI child nodes. If unspecified, a single SPI device without a chip select can be used. - fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the SPISEL_BOOT signal is used as chip select for a slave device. Use reg = <number of gpios> in the corresponding child node, i.e. 0 if - the gpios property is not present. + the cs-gpios property is not present. Example: spi@4c0 { @@ -31,8 +31,8 @@ Example: interrupts = <82 0>; interrupt-parent = <700>; mode = "cpu"; - gpios = <&gpio 18 1 // device reg=<0> - &gpio 19 1>; // device reg=<1> + cs-gpios = <&gpio 18 1 // device reg=<0> + &gpio 19 1>; // device reg=<1> }; diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt index b935b526d2f3..950e4fba8dbc 100644 --- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt @@ -6,6 +6,11 @@ Required properties: "dlg,da9061-watchdog", "dlg,da9062-watchdog" "dlg,da9062-watchdog" +Optional properties: +- dlg,use-sw-pm: Add this property to disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + Example: DA9062 pmic0: da9062@58 { diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index fd380eb28df5..4dd36bd3f1ad 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -4,22 +4,27 @@ Required properties: - compatible should contain: "mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701 + "mediatek,mt2712-wdt", "mediatek,mt6589-wdt": for MT2712 "mediatek,mt6589-wdt": for MT6589 "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797 "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622 "mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623 "mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629 + "mediatek,mt8183-wdt", "mediatek,mt6589-wdt": for MT8183 "mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516 - reg : Specifies base physical address and size of the registers. Optional properties: - timeout-sec: contains the watchdog timeout in seconds. +- #reset-cells: Should be 1. Example: -wdt: watchdog@10000000 { - compatible = "mediatek,mt6589-wdt"; - reg = <0x10000000 0x18>; +watchdog: watchdog@10007000 { + compatible = "mediatek,mt8183-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; timeout-sec = <10>; + #reset-cells = <1>; }; |