aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/driver-api/mtdnand.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/driver-api/mtdnand.rst')
-rw-r--r--Documentation/driver-api/mtdnand.rst34
1 files changed, 17 insertions, 17 deletions
diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst
index c55a6034c397..55447659b81f 100644
--- a/Documentation/driver-api/mtdnand.rst
+++ b/Documentation/driver-api/mtdnand.rst
@@ -180,10 +180,10 @@ by a chip select decoder.
{
struct nand_chip *this = mtd_to_nand(mtd);
switch(cmd){
- case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT; break;
- case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break;
- case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT; break;
- case NAND_CTL_CLRALE: this->IO_ADDR_W &= ~ALE_ADRR_BIT; break;
+ case NAND_CTL_SETCLE: this->legacy.IO_ADDR_W |= CLE_ADRR_BIT; break;
+ case NAND_CTL_CLRCLE: this->legacy.IO_ADDR_W &= ~CLE_ADRR_BIT; break;
+ case NAND_CTL_SETALE: this->legacy.IO_ADDR_W |= ALE_ADRR_BIT; break;
+ case NAND_CTL_CLRALE: this->legacy.IO_ADDR_W &= ~ALE_ADRR_BIT; break;
}
}
@@ -197,7 +197,7 @@ to read back the state of the pin. The function has no arguments and
should return 0, if the device is busy (R/B pin is low) and 1, if the
device is ready (R/B pin is high). If the hardware interface does not
give access to the ready busy pin, then the function must not be defined
-and the function pointer this->dev_ready is set to NULL.
+and the function pointer this->legacy.dev_ready is set to NULL.
Init function
-------------
@@ -235,18 +235,18 @@ necessary information about the device.
}
/* Set address of NAND IO lines */
- this->IO_ADDR_R = baseaddr;
- this->IO_ADDR_W = baseaddr;
+ this->legacy.IO_ADDR_R = baseaddr;
+ this->legacy.IO_ADDR_W = baseaddr;
/* Reference hardware control function */
this->hwcontrol = board_hwcontrol;
/* Set command delay time, see datasheet for correct value */
- this->chip_delay = CHIP_DEPENDEND_COMMAND_DELAY;
+ this->legacy.chip_delay = CHIP_DEPENDEND_COMMAND_DELAY;
/* Assign the device ready function, if available */
- this->dev_ready = board_dev_ready;
+ this->legacy.dev_ready = board_dev_ready;
this->eccmode = NAND_ECC_SOFT;
/* Scan to find existence of the device */
- if (nand_scan (board_mtd, 1)) {
+ if (nand_scan (this, 1)) {
err = -ENXIO;
goto out_ior;
}
@@ -277,7 +277,7 @@ unregisters the partitions in the MTD layer.
static void __exit board_cleanup (void)
{
/* Release resources, unregister device */
- nand_release (board_mtd);
+ nand_release (mtd_to_nand(board_mtd));
/* unmap physical address */
iounmap(baseaddr);
@@ -336,17 +336,17 @@ connected to an address decoder.
struct nand_chip *this = mtd_to_nand(mtd);
/* Deselect all chips */
- this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK;
- this->IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK;
+ this->legacy.IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK;
+ this->legacy.IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK;
switch (chip) {
case 0:
- this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;
- this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0;
+ this->legacy.IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;
+ this->legacy.IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0;
break;
....
case n:
- this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn;
- this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn;
+ this->legacy.IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn;
+ this->legacy.IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn;
break;
}
}