diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/filesystems/ext4/journal.rst | 214 |
1 files changed, 107 insertions, 107 deletions
diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst index 5fad38860f17..a6bef5293a60 100644 --- a/Documentation/filesystems/ext4/journal.rst +++ b/Documentation/filesystems/ext4/journal.rst @@ -63,8 +63,8 @@ Generally speaking, the journal has this format: :header-rows: 1 * - Superblock - - descriptor\_block (data\_blocks or revocation\_block) [more data or - revocations] commmit\_block + - descriptor_block (data_blocks or revocation_block) [more data or + revocations] commmit_block - [more transactions...] * - - One transaction @@ -93,8 +93,8 @@ superblock. * - 1024 bytes of padding - ext4 Superblock - Journal Superblock - - descriptor\_block (data\_blocks or revocation\_block) [more data or - revocations] commmit\_block + - descriptor_block (data_blocks or revocation_block) [more data or + revocations] commmit_block - [more transactions...] * - - @@ -117,17 +117,17 @@ Every block in the journal starts with a common 12-byte header - Name - Description * - 0x0 - - \_\_be32 - - h\_magic + - __be32 + - h_magic - jbd2 magic number, 0xC03B3998. * - 0x4 - - \_\_be32 - - h\_blocktype + - __be32 + - h_blocktype - Description of what this block contains. See the jbd2_blocktype_ table below. * - 0x8 - - \_\_be32 - - h\_sequence + - __be32 + - h_sequence - The transaction ID that goes with this block. .. _jbd2_blocktype: @@ -177,99 +177,99 @@ which is 1024 bytes long: - - Static information describing the journal. * - 0x0 - - journal\_header\_t (12 bytes) - - s\_header + - journal_header_t (12 bytes) + - s_header - Common header identifying this as a superblock. * - 0xC - - \_\_be32 - - s\_blocksize + - __be32 + - s_blocksize - Journal device block size. * - 0x10 - - \_\_be32 - - s\_maxlen + - __be32 + - s_maxlen - Total number of blocks in this journal. * - 0x14 - - \_\_be32 - - s\_first + - __be32 + - s_first - First block of log information. * - - - - Dynamic information describing the current state of the log. * - 0x18 - - \_\_be32 - - s\_sequence + - __be32 + - s_sequence - First commit ID expected in log. * - 0x1C - - \_\_be32 - - s\_start + - __be32 + - s_start - Block number of the start of log. Contrary to the comments, this field being zero does not imply that the journal is clean! * - 0x20 - - \_\_be32 - - s\_errno - - Error value, as set by jbd2\_journal\_abort(). + - __be32 + - s_errno + - Error value, as set by jbd2_journal_abort(). * - - - - The remaining fields are only valid in a v2 superblock. * - 0x24 - - \_\_be32 - - s\_feature\_compat; + - __be32 + - s_feature_compat; - Compatible feature set. See the table jbd2_compat_ below. * - 0x28 - - \_\_be32 - - s\_feature\_incompat + - __be32 + - s_feature_incompat - Incompatible feature set. See the table jbd2_incompat_ below. * - 0x2C - - \_\_be32 - - s\_feature\_ro\_compat + - __be32 + - s_feature_ro_compat - Read-only compatible feature set. There aren't any of these currently. * - 0x30 - - \_\_u8 - - s\_uuid[16] + - __u8 + - s_uuid[16] - 128-bit uuid for journal. This is compared against the copy in the ext4 super block at mount time. * - 0x40 - - \_\_be32 - - s\_nr\_users + - __be32 + - s_nr_users - Number of file systems sharing this journal. * - 0x44 - - \_\_be32 - - s\_dynsuper + - __be32 + - s_dynsuper - Location of dynamic super block copy. (Not used?) * - 0x48 - - \_\_be32 - - s\_max\_transaction + - __be32 + - s_max_transaction - Limit of journal blocks per transaction. (Not used?) * - 0x4C - - \_\_be32 - - s\_max\_trans\_data + - __be32 + - s_max_trans_data - Limit of data blocks per transaction. (Not used?) * - 0x50 - - \_\_u8 - - s\_checksum\_type + - __u8 + - s_checksum_type - Checksum algorithm used for the journal. See jbd2_checksum_type_ for more info. * - 0x51 - - \_\_u8[3] - - s\_padding2 + - __u8[3] + - s_padding2 - * - 0x54 - - \_\_be32 - - s\_num\_fc\_blocks + - __be32 + - s_num_fc_blocks - Number of fast commit blocks in the journal. * - 0x58 - - \_\_u32 - - s\_padding[42] + - __u32 + - s_padding[42] - * - 0xFC - - \_\_be32 - - s\_checksum + - __be32 + - s_checksum - Checksum of the entire superblock, with this field set to zero. * - 0x100 - - \_\_u8 - - s\_users[16\*48] + - __u8 + - s_users[16*48] - ids of all file systems sharing the log. e2fsprogs/Linux don't allow shared external journals, but I imagine Lustre (or ocfs2?), which use the jbd2 code, might. @@ -286,7 +286,7 @@ The journal compat features are any combination of the following: - Description * - 0x1 - Journal maintains checksums on the data blocks. - (JBD2\_FEATURE\_COMPAT\_CHECKSUM) + (JBD2_FEATURE_COMPAT_CHECKSUM) .. _jbd2_incompat: @@ -299,23 +299,23 @@ The journal incompat features are any combination of the following: * - Value - Description * - 0x1 - - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE) + - Journal has block revocation records. (JBD2_FEATURE_INCOMPAT_REVOKE) * - 0x2 - Journal can deal with 64-bit block numbers. - (JBD2\_FEATURE\_INCOMPAT\_64BIT) + (JBD2_FEATURE_INCOMPAT_64BIT) * - 0x4 - - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT) + - Journal commits asynchronously. (JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) * - 0x8 - This journal uses v2 of the checksum on-disk format. Each journal metadata block gets its own checksum, and the block tags in the descriptor table contain checksums for each of the data blocks in the - journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2) + journal. (JBD2_FEATURE_INCOMPAT_CSUM_V2) * - 0x10 - This journal uses v3 of the checksum on-disk format. This is the same as v2, but the journal block tag size is fixed regardless of the size of - block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3) + block numbers. (JBD2_FEATURE_INCOMPAT_CSUM_V3) * - 0x20 - - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) + - Journal has fast commit blocks. (JBD2_FEATURE_INCOMPAT_FAST_COMMIT) .. _jbd2_checksum_type: @@ -355,11 +355,11 @@ Descriptor blocks consume at least 36 bytes, but use a full block: - Name - Descriptor * - 0x0 - - journal\_header\_t + - journal_header_t - (open coded) - Common block header. * - 0xC - - struct journal\_block\_tag\_s + - struct journal_block_tag_s - open coded array[] - Enough tags either to fill up the block or to describe all the data blocks that follow this descriptor block. @@ -367,7 +367,7 @@ Descriptor blocks consume at least 36 bytes, but use a full block: Journal block tags have any of the following formats, depending on which journal feature and block tag flags are set. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is +If JBD2_FEATURE_INCOMPAT_CSUM_V3 is set, the journal block tag is defined as ``struct journal_block_tag3_s``, which looks like the following. The size is 16 or 32 bytes. @@ -380,24 +380,24 @@ following. The size is 16 or 32 bytes. - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_blocknr + - __be32 + - t_blocknr - Lower 32-bits of the location of where the corresponding data block should end up on disk. * - 0x4 - - \_\_be32 - - t\_flags + - __be32 + - t_flags - Flags that go with the descriptor. See the table jbd2_tag_flags_ for more info. * - 0x8 - - \_\_be32 - - t\_blocknr\_high + - __be32 + - t_blocknr_high - Upper 32-bits of the location of where the corresponding data block - should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is + should end up on disk. This is zero if JBD2_FEATURE_INCOMPAT_64BIT is not enabled. * - 0xC - - \_\_be32 - - t\_checksum + - __be32 + - t_checksum - Checksum of the journal UUID, the sequence number, and the data block. * - - @@ -433,7 +433,7 @@ The journal tag flags are any combination of the following: * - 0x8 - This is the last tag in this descriptor block. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag +If JBD2_FEATURE_INCOMPAT_CSUM_V3 is NOT set, the journal block tag is defined as ``struct journal_block_tag_s``, which looks like the following. The size is 8, 12, 24, or 28 bytes: @@ -446,18 +446,18 @@ following. The size is 8, 12, 24, or 28 bytes: - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_blocknr + - __be32 + - t_blocknr - Lower 32-bits of the location of where the corresponding data block should end up on disk. * - 0x4 - - \_\_be16 - - t\_checksum + - __be16 + - t_checksum - Checksum of the journal UUID, the sequence number, and the data block. Note that only the lower 16 bits are stored. * - 0x6 - - \_\_be16 - - t\_flags + - __be16 + - t_flags - Flags that go with the descriptor. See the table jbd2_tag_flags_ for more info. * - @@ -466,8 +466,8 @@ following. The size is 8, 12, 24, or 28 bytes: - This next field is only present if the super block indicates support for 64-bit block numbers. * - 0x8 - - \_\_be32 - - t\_blocknr\_high + - __be32 + - t_blocknr_high - Upper 32-bits of the location of where the corresponding data block should end up on disk. * - @@ -483,8 +483,8 @@ following. The size is 8, 12, 24, or 28 bytes: ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that field. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or -JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a +If JBD2_FEATURE_INCOMPAT_CSUM_V2 or +JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the block is a ``struct jbd2_journal_block_tail``, which looks like this: .. list-table:: @@ -496,8 +496,8 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_checksum + - __be32 + - t_checksum - Checksum of the journal UUID + the descriptor block, with this field set to zero. @@ -538,25 +538,25 @@ length, but use a full block: - Name - Description * - 0x0 - - journal\_header\_t - - r\_header + - journal_header_t + - r_header - Common block header. * - 0xC - - \_\_be32 - - r\_count + - __be32 + - r_count - Number of bytes used in this block. * - 0x10 - - \_\_be32 or \_\_be64 + - __be32 or __be64 - blocks[0] - Blocks to revoke. -After r\_count is a linear array of block numbers that are effectively +After r_count is a linear array of block numbers that are effectively revoked by this transaction. The size of each block number is 8 bytes if the superblock advertises 64-bit block number support, or 4 bytes otherwise. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or -JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation +If JBD2_FEATURE_INCOMPAT_CSUM_V2 or +JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the revocation block is a ``struct jbd2_journal_revoke_tail``, which has this format: .. list-table:: @@ -568,8 +568,8 @@ block is a ``struct jbd2_journal_revoke_tail``, which has this format: - Name - Description * - 0x0 - - \_\_be32 - - r\_checksum + - __be32 + - r_checksum - Checksum of the journal UUID + revocation block Commit Block @@ -592,38 +592,38 @@ bytes long (but uses a full block): - Name - Descriptor * - 0x0 - - journal\_header\_s + - journal_header_s - (open coded) - Common block header. * - 0xC - unsigned char - - h\_chksum\_type + - h_chksum_type - The type of checksum to use to verify the integrity of the data blocks in the transaction. See jbd2_checksum_type_ for more info. * - 0xD - unsigned char - - h\_chksum\_size + - h_chksum_size - The number of bytes used by the checksum. Most likely 4. * - 0xE - unsigned char - - h\_padding[2] + - h_padding[2] - * - 0x10 - - \_\_be32 - - h\_chksum[JBD2\_CHECKSUM\_BYTES] + - __be32 + - h_chksum[JBD2_CHECKSUM_BYTES] - 32 bytes of space to store checksums. If - JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 + JBD2_FEATURE_INCOMPAT_CSUM_V2 or JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the first ``__be32`` is the checksum of the journal UUID and the entire commit block, with this field zeroed. If - JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the + JBD2_FEATURE_COMPAT_CHECKSUM is set, the first ``__be32`` is the crc32 of all the blocks already written to the transaction. * - 0x30 - - \_\_be64 - - h\_commit\_sec + - __be64 + - h_commit_sec - The time that the transaction was committed, in seconds since the epoch. * - 0x38 - - \_\_be32 - - h\_commit\_nsec + - __be32 + - h_commit_nsec - Nanoseconds component of the above timestamp. Fast commits |