diff options
Diffstat (limited to 'Documentation/firmware-guide/acpi/apei/einj.rst')
| -rw-r--r-- | Documentation/firmware-guide/acpi/apei/einj.rst | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index c042176e1707..55e2331a6438 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -181,5 +181,24 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +Special notes for injection into SGX enclaves: + +There may be a separate BIOS setup option to enable SGX injection. + +The injection process consists of setting some special memory controller +trigger that will inject the error on the next write to the target +address. But the h/w prevents any software outside of an SGX enclave +from accessing enclave pages (even BIOS SMM mode). + +The following sequence can be used: + 1) Determine physical address of enclave page + 2) Use "notrigger=1" mode to inject (this will setup + the injection address, but will not actually inject) + 3) Enter the enclave + 4) Store data to the virtual address matching physical address from step 1 + 5) Execute CLFLUSH for that virtual address + 6) Spin delay for 250ms + 7) Read from the virtual address. This will trigger the error + For more information about EINJ, please refer to ACPI specification version 4.0, section 17.5 and ACPI 5.0, section 18.6. |