diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/firmware-guide/acpi/dsd/phy.rst | 28 |
1 files changed, 15 insertions, 13 deletions
diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst index 680ad179e5f9..673ac374f92a 100644 --- a/Documentation/firmware-guide/acpi/dsd/phy.rst +++ b/Documentation/firmware-guide/acpi/dsd/phy.rst @@ -4,17 +4,17 @@ MDIO bus and PHYs in ACPI ========================= -The PHYs on an MDIO bus [1] are probed and registered using +The PHYs on an MDIO bus [phy] are probed and registered using fwnode_mdiobus_register_phy(). Later, for connecting these PHYs to their respective MACs, the PHYs registered on the MDIO bus have to be referenced. This document introduces two _DSD properties that are to be used -for connecting PHYs on the MDIO bus [3] to the MAC layer. +for connecting PHYs on the MDIO bus [dsd-properties-rules] to the MAC layer. These properties are defined in accordance with the "Device -Properties UUID For _DSD" [2] document and the +Properties UUID For _DSD" [dsd-guide] document and the daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device Data Descriptors containing them. @@ -48,22 +48,22 @@ as device object references (e.g. \_SB.MDI0.PHY1). phy-mode -------- The "phy-mode" _DSD property is used to describe the connection to -the PHY. The valid values for "phy-mode" are defined in [4]. +the PHY. The valid values for "phy-mode" are defined in [ethernet-controller]. managed ------- Optional property, which specifies the PHY management type. -The valid values for "managed" are defined in [4]. +The valid values for "managed" are defined in [ethernet-controller]. fixed-link ---------- The "fixed-link" is described by a data-only subnode of the MAC port, which is linked in the _DSD package via hierarchical data extension (UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b -in accordance with [5] "_DSD Implementation Guide" document). +in accordance with [dsd-guide] "_DSD Implementation Guide" document). The subnode should comprise a required property ("speed") and possibly the optional ones - complete list of parameters and -their values are specified in [4]. +their values are specified in [ethernet-controller]. The following ASL example illustrates the usage of these properties. @@ -188,12 +188,14 @@ MAC node example with a "fixed-link" subnode. References ========== -[1] Documentation/networking/phy.rst +[phy] Documentation/networking/phy.rst -[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf +[dsd-properties-rules] + Documentation/firmware-guide/acpi/DSD-properties-rules.rst -[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst +[ethernet-controller] + Documentation/devicetree/bindings/net/ethernet-controller.yaml -[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml - -[5] https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf +[dsd-guide] DSD Guide. + https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced + 2021-11-30. |