diff options
Diffstat (limited to 'Documentation/gpio')
| -rw-r--r-- | Documentation/gpio/drivers-on-gpio.txt | 5 | ||||
| -rw-r--r-- | Documentation/gpio/gpio-legacy.txt | 2 |
2 files changed, 6 insertions, 1 deletions
diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt index 306513251713..9a78d385b92e 100644 --- a/Documentation/gpio/drivers-on-gpio.txt +++ b/Documentation/gpio/drivers-on-gpio.txt @@ -84,6 +84,11 @@ hardware descriptions such as device tree or ACPI: NAND flash MTD subsystem and provides chip access and partition parsing like any other NAND driving hardware. +- ps2-gpio: drivers/input/serio/ps2-gpio.c is used to drive a PS/2 (IBM) serio + bus, data and clock line, by bit banging two GPIO lines. It will appear as + any other serio bus to the system and makes it possible to connect drivers + for e.g. keyboards and other PS/2 protocol based devices. + Apart from this there are special GPIO drivers in subsystems like MMC/SD to read card detect and write protect GPIO lines, and in the TTY serial subsystem to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt index b34fd94f7089..5eacc147ea87 100644 --- a/Documentation/gpio/gpio-legacy.txt +++ b/Documentation/gpio/gpio-legacy.txt @@ -459,7 +459,7 @@ pin controller? This is done by registering "ranges" of pins, which are essentially cross-reference tables. These are described in -Documentation/pinctrl.txt +Documentation/driver-api/pinctl.rst While the pin allocation is totally managed by the pinctrl subsystem, gpio (under gpiolib) is still maintained by gpio drivers. It may happen |