diff options
Diffstat (limited to 'Documentation/hwmon/dme1737')
| -rw-r--r-- | Documentation/hwmon/dme1737 | 88 |
1 files changed, 62 insertions, 26 deletions
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 4d2935145a1c..82fcbc6b2b43 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -2,21 +2,37 @@ Kernel driver dme1737 ===================== Supported chips: + * SMSC DME1737 and compatibles (like Asus A8000) + Prefix: 'dme1737' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH3112, SCH3114, SCH3116 + Prefix: 'sch311x' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Available on the Internet + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH5127 + Prefix: 'sch5127' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Provided by SMSC upon request and under NDA Authors: @@ -26,11 +42,14 @@ Authors: Module Parameters ----------------- -* force_start: bool Enables the monitoring of voltage, fan and temp inputs +* force_start: bool + Enables the monitoring of voltage, fan and temp inputs and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. -* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + +* probe_all_addr: bool + Include non-standard LPC addresses 0x162e and 0x164e when probing for ISA devices. This is required for the following boards: - VIA EPIA SN18000 @@ -70,7 +89,8 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): -DME1737, A8000: +DME1737, A8000:: + in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -79,7 +99,8 @@ DME1737, A8000: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH311x: +SCH311x:: + in0: +2.5V 0V - 3.32V in1: Vccp (processor core) 0V - 2V in2: VCC (internal +3.3V) 0V - 4.38V @@ -88,7 +109,8 @@ SCH311x: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH5027: +SCH5027:: + in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -97,7 +119,8 @@ SCH5027: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH5127: +SCH5127:: + in0: +2.5 0V - 3.32V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -119,7 +142,7 @@ Celsius. The chip also features offsets for all 3 temperature inputs which - when programmed - get added to the input readings. The chip does all the scaling by itself and the driver therefore reports true temperatures that don't need any user-space adjustments. The temperature inputs are mapped as follows -(the last column indicates the input ranges): +(the last column indicates the input ranges):: temp1: Remote diode 1 (3904 type) temperature -127C - +127C temp2: DME1737 internal temperature -127C - +127C @@ -171,6 +194,7 @@ pwm[1-3]_auto_pwm_min, respectively. The thermal thresholds of the zones are programmed via zone[1-3]_auto_point[1-3]_temp and zone[1-3]_auto_point1_temp_hyst: + =============================== ======================================= pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%) pwm[1-3]_auto_point1_pwm low-speed duty-cycle pwm[1-3]_auto_pwm_min min-speed duty-cycle @@ -179,6 +203,7 @@ zone[1-3]_auto_point1_temp_hyst: zone[1-3]_auto_point2_temp full-speed temp zone[1-3]_auto_point1_temp low-speed temp zone[1-3]_auto_point1_temp_hyst min-speed temp + =============================== ======================================= The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm to auto_point2_pwm if the temperature of the associated zone is between @@ -192,17 +217,21 @@ all PWM outputs are set to 100% duty-cycle. Following is another representation of how the chip sets the output duty-cycle based on the temperature of the associated thermal zone: - Duty-Cycle Duty-Cycle - Temperature Rising Temp Falling Temp - ----------- ----------- ------------ + =============== =============== ================= + Temperature Duty-Cycle Duty-Cycle + Rising Temp Falling Temp + =============== =============== ================= full-speed full-speed full-speed - < linearly adjusted duty-cycle > + - < linearly - + adjusted + duty-cycle > low-speed low-speed low-speed - min-speed low-speed + - min-speed low-speed min-speed min-speed min-speed - min-speed min-speed + - min-speed min-speed + =============== =============== ================= Sysfs Attributes @@ -211,8 +240,9 @@ Sysfs Attributes Following is a list of all sysfs attributes that the driver provides, their permissions and a short description: +=============================== ======= ======================================= Name Perm Description ----- ---- ----------- +=============================== ======= ======================================= cpu0_vid RO CPU core reference voltage in millivolts. vrm RW Voltage regulator module version @@ -242,9 +272,10 @@ temp[1-3]_fault RO Temp input fault. Returns 1 if the chip zone[1-3]_auto_channels_temp RO Temperature zone to temperature input mapping. This attribute is a bitfield and supports the following values: - 1: temp1 - 2: temp2 - 4: temp3 + + - 1: temp1 + - 2: temp2 + - 4: temp3 zone[1-3]_auto_point1_temp_hyst RW Auto PWM temp point1 hysteresis. The output of the corresponding PWM is set to the pwm_auto_min value if the temp @@ -275,9 +306,10 @@ pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported manual mode. pwm[1-3]_enable RW Enable of PWM outputs 1-3. Supported values are: - 0: turned off (output @ 100%) - 1: manual mode - 2: automatic mode + + - 0: turned off (output @ 100%) + - 1: manual mode + - 2: automatic mode pwm[5-6]_enable RO Enable of PWM outputs 5-6. Always returns 1 since these 2 outputs are hard-wired to manual mode. @@ -294,11 +326,12 @@ pmw[1-3]_ramp_rate RW Ramp rate of PWM output. Determines how pwm[1-3]_auto_channels_zone RW PWM output to temperature zone mapping. This attribute is a bitfield and supports the following values: - 1: zone1 - 2: zone2 - 4: zone3 - 6: highest of zone[2-3] - 7: highest of zone[1-3] + + - 1: zone1 + - 2: zone2 + - 4: zone3 + - 6: highest of zone[2-3] + - 7: highest of zone[1-3] pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty- cycle. Supported values are 0 or auto_point1_pwm. @@ -307,12 +340,14 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the full-speed duty-cycle which is hard- wired to 255 (100% duty-cycle). +=============================== ======= ======================================= Chip Differences ---------------- +======================= ======= ======= ======= ======= Feature dme1737 sch311x sch5027 sch5127 -------------------------------------------------------- +======================= ======= ======= ======= ======= temp[1-3]_offset yes yes vid yes zone3 yes yes yes @@ -326,3 +361,4 @@ pwm5 opt opt fan6 opt opt pwm6 opt opt in7 yes +======================= ======= ======= ======= ======= |