diff options
Diffstat (limited to 'Documentation/hwmon/pxe1610')
| -rw-r--r-- | Documentation/hwmon/pxe1610 | 90 |
1 files changed, 0 insertions, 90 deletions
diff --git a/Documentation/hwmon/pxe1610 b/Documentation/hwmon/pxe1610 deleted file mode 100644 index 211cedeefb44..000000000000 --- a/Documentation/hwmon/pxe1610 +++ /dev/null @@ -1,90 +0,0 @@ -Kernel driver pxe1610 -===================== - -Supported chips: - * Infineon PXE1610 - Prefix: 'pxe1610' - Addresses scanned: - - Datasheet: Datasheet is not publicly available. - - * Infineon PXE1110 - Prefix: 'pxe1110' - Addresses scanned: - - Datasheet: Datasheet is not publicly available. - - * Infineon PXM1310 - Prefix: 'pxm1310' - Addresses scanned: - - Datasheet: Datasheet is not publicly available. - -Author: Vijay Khemka <vijaykhemka@fb.com> - - -Description ------------ - -PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers -and compliant to - -- Intel VR13 DC-DC converter specifications. - -- Intel SVID protocol. -Used for Vcore power regulation for Intel VR13 based microprocessors - -- Servers, Workstations, and High-end desktops - -PXM1310 is a Multi-rail Controller and it is compliant to - -- Intel VR13 DC-DC converter specifications. - -- Intel SVID protocol. -Used for DDR3/DDR4 Memory power regulation for Intel VR13 and -IMVP8 based systems - - -Usage Notes ------------ - -This driver does not probe for PMBus devices. You will have -to instantiate devices explicitly. - -Example: the following commands will load the driver for an PXE1610 -at address 0x70 on I2C bus #4: - -# modprobe pxe1610 -# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device - -It can also be instantiated by declaring in device tree - - -Sysfs attributes ----------------- - -curr1_label "iin" -curr1_input Measured input current -curr1_alarm Current high alarm - -curr[2-4]_label "iout[1-3]" -curr[2-4]_input Measured output current -curr[2-4]_crit Critical maximum current -curr[2-4]_crit_alarm Current critical high alarm - -in1_label "vin" -in1_input Measured input voltage -in1_crit Critical maximum input voltage -in1_crit_alarm Input voltage critical high alarm - -in[2-4]_label "vout[1-3]" -in[2-4]_input Measured output voltage -in[2-4]_lcrit Critical minimum output voltage -in[2-4]_lcrit_alarm Output voltage critical low alarm -in[2-4]_crit Critical maximum output voltage -in[2-4]_crit_alarm Output voltage critical high alarm - -power1_label "pin" -power1_input Measured input power -power1_alarm Input power high alarm - -power[2-4]_label "pout[1-3]" -power[2-4]_input Measured output power - -temp[1-3]_input Measured temperature -temp[1-3]_crit Critical high temperature -temp[1-3]_crit_alarm Chip temperature critical high alarm -temp[1-3]_max Maximum temperature -temp[1-3]_max_alarm Chip temperature high alarm |